.jpg)
4071 Omnidirectional, Presence Boost
An outstanding speech and vocal mic, the 4071 will make your voice heard. Use it for applications which require small microphones that are resistant to moisture, extreme temperature change and humidity.
When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut has been incorporated in the 4071 capsule so the built-in pre amp (and the wireless system) will have much larger headroom.
The 4071 lapel mic is available in three colors: black, beige and white.
- increased speech clarity when chest-worn
- ideel for the reporter in the studio or in the field, or film production use
- available in three colors: black, beige and white
| Directional characteristics: |
Omnidirectional |
| Principle of operation: |
Pressure |
| Cartridge type: |
Pre-polarized condenser element with vertical diaphragm |
| Frequency range, ± 2 dB: |
100 Hz - 15 kHz with 5 dB soft boost at 4 - 6 kHz |
| Sensitivity, nominal, ±3 dB: |
6 mV/Pa ved 1 kHz; -44.4 dB re. 1 V/Pa |
| Equivalent noise level A-weighted: |
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A)) |
| Equiv. noise level ITU-R BS.468-4: |
Typ. 38 dB (max. 40 dB) |
| S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): |
68 dB (A) |
| Total harmonic distortion (THD): |
<1% THD up to 123 dB SPL peak;<1% up to 120 dB SPL RMS sine |
| Dynamic range: |
Typ. 97 dB |
| Max. SPL, peak before clipping: |
144 dB |
| Output impedance: |
30 - 40 Ohm |
| Cable drive capability: |
Up to 300 m (984 ft) |
| Power supply: |
Min. 5 V - max. 50 V (through DPA adapter) |
| Connector: |
MicroDot |
| Weight: |
9 g (0.3 oz) incl. cable and MicroDot connector |
| Capsule diameter: |
5.4 mm (0.2 in) |
| Microphone length: |
17 mm (0.67 in) |
| Cable length: |
1.8 m (6 ft) |
|
