All Windshields & Mounts

Page 1 of 7:    191 Items

1   2   3   4   5   6   7
Show All Products
Ambient QAT-ECO/Kabel Boom Accessory

Ambient QAT-ECO/Kabel Boom Accessory

£55.00
  • The 15.7" Ambient QAT-ECO/Kabel comes with a thin cable for windshield
  • The unit features a mono 3-pin XLR connector
  • Length: approx. 40 cm
  • Weight: 76 g
£60.00_value
£55.00

Cinela ALBERT Windshield for 2 x Sennheiser MKH8000 Pair (ORTF, XY)

Cinela ALBERT Windshield for 2 x Sennheiser MKH8000 Pair (ORTF, XY)

£1,235.00
  • Elliptic geometry adapted for spaced microphone (time difference)
  • Suspended cage (patented) for improved handling noise attenuation
  • Use of two MINIX 8000 suspensions, fixed on a rail for MKH 8040 / 8050
  • Perfect for stereophonic sets like ORTF, XY or any kind of angle/distance combination
£1,237.20_value
£1,235.00

Cinela ALBERT Windshield for 3 Schoeps CCM Set (ORTF + Centre, XY)

Cinela ALBERT Windshield for 3 Schoeps CCM Set (ORTF + Centre, XY)

£1,296.00
  • Elliptic geometry adapted for spaced microphone (time difference)
  • Suspended cage (patented) for improved handling noise attenuation
  • Use of three MINIX CCM suspensions, fixed on a rail
  • Perfect for stereophonic sets like ORTF, XY or any kind of angle/distance combination
£1,296.00

Cinela ALBERT Windshield for 3 x Sennheiser MKH8000 (ORTF + Centre, XY)

Cinela ALBERT Windshield for 3 x Sennheiser MKH8000 (ORTF + Centre, XY)

£1,470.00
  • Elliptic geometry adapted for spaced microphone (time difference)
  • Suspended cage (patented) for improved handling noise attenuation
  • Use of three MINIX 8000 suspensions, fixed on a rail
  • Perfect for stereophonic sets like ORTF, XY or any kind of angle/distance combination
£1,472.40_value
£1,470.00

Cinela ALBERT Windshield for Schoeps CCM Pair (ORTF, XY)

Cinela ALBERT Windshield for Schoeps CCM Pair (ORTF, XY)

£1,122.00
  • Elliptic geometry adapted for spaced microphone (time difference).
  • Suspended cage (patented) for improved handling noise attenuation.
  • Use of two MINIX CCM suspensions, fixed on a rail
  • Perfect for stereophonic sets like ORTF, XY or any kind of angle/distance combination
£1,122.00

Cinela ALBERT Windshield for Schoeps MSTC

Cinela ALBERT Windshield for Schoeps MSTC

£1,122.00
  • The central "T" rod is ended by a very short shielded XLR.
  • This version doesn't allow the installation of a central microphone.
  • Isolators: 2 x D4
  • Two axis swivel (Zephyx type) with single knob.
£1,122.00

Cinela LEONARD Small Windshield with Fur for 20mm Diameter Microphones

Cinela LEONARD Small Windshield with Fur for 20mm Diameter Microphones

£196.00
  • Wind protection ball (10cm diameter)
  • For 20mm diameter microphones, like the Schoeps CMC
  • Main fabric for indoor use (Zephyx alike). Extra fur for outdoor use
  • Compatible with the standard configuration CMC/OSIX 2
£196.80_value
£196.00

Cinela Minix 8000 for Sennheiser MKH 8040 and 8050

Cinela Minix 8000 for Sennheiser MKH 8040 and 8050

£250.00
  • Indoor suspension fitted with a single isolator for maximum efficiency and minimum size
  • Inserted in a cradle, the Original Sennheiser connector allows direct to the MKH8000
  • The signal is sent to the standard XLR fixed to the standard Osix base swivel
  • It is necessary to provide a filtering (50-80Hz, +12 or better +18 dB/oct)
£289.00_value
£250.00

Cinela Minix CCM Miniature OSIX for Schoeps CCM (Lemo)

Cinela Minix CCM Miniature OSIX for Schoeps CCM (Lemo)

£212.00
  • Designed specifically for the Schoeps CCM compact microphone series
  • Indoor suspension fitted with a single isolator for maximum efficiency and minimum size
  • Inserted in a cradle, the Lemo connector allows direct screw of the CCM
  • The signal is sent to the XLR fixed to the standard Osix base swivel
£212.40_value
£212.00

Cinela Osix 2 Shockmount for Schoeps CMC + MK

Cinela Osix 2 Shockmount for Schoeps CMC + MK

£245.00
  • An optimal compromise between vibration isolation and firmness of the mic mounting
  • All OSIX & MINIX are now equipped with unbreakable plastic isolators
  • Elastic properties give isolation and firmness qualities to the suspensions
  • Cinela is considered the ultimate in mic isolation for boompole mounting
£252.00_value
£245.00

Cinela OSIX 2-416 Suspension for MKH 416 or KMR81

Cinela OSIX 2-416 Suspension for MKH 416 or KMR81

£252.00
  • Compatible with Neumann KMR 81, Sennheiser MKH 416, AKG SE 300 B
  • All OSIX & MINIX are now equipped with unbreakable plastic isolators
  • Elastic properties give isolation and firmness qualities to the suspensions
  • Cinela is considered the ultimate in mic isolation for boompole mounting
£252.00

Cinela OSIX 3 Suspension MKH 20, 30, 40 & 50

Cinela OSIX 3 Suspension MKH 20, 30, 40 & 50

£245.00
  • Compatible with Sennheiser MKH 20, MKH 30, MKH 40, MKH 50
  • All OSIX & MINIX are now equipped with unbreakable plastic isolators
  • Elastic properties give isolation and firmness qualities to the suspensions
  • Cinela is considered the ultimate in mic isolation for boompole mounting
£252.00_value
£245.00

Cinela OSIX 3-418 Shockmount for Sennheiser MKH418

Cinela OSIX 3-418 Shockmount for Sennheiser MKH418

£319.00
  • Compatible with Sennheiser MKH418 & Sennheiser MKH418 S
  • All OSIX & MINIX are now equipped with unbreakable plastic isolators
  • Elastic properties give isolation and firmness qualities to the suspensions
  • Cinela is considered the ultimate in mic isolation for boompole mounting
£319.20_value
£319.00

Cinela OSIX 3-60 Suspension for Sennheiser MKH 60

Cinela OSIX 3-60 Suspension for Sennheiser MKH 60

£252.00
  • Compatible with Sennheiser MKH 60, Schoeps CMC + CUT1, Schoeps CMIT 5U
  • All OSIX & MINIX are now equipped with unbreakable plastic isolators
  • Elastic properties give isolation and firmness qualities to the suspensions
  • Cinela is considered the ultimate in mic isolation for boompole mounting
£252.00

Cinela OSIX 8060 Suspension for Sennheiser MKH8060

Cinela OSIX 8060 Suspension for Sennheiser MKH8060

£252.00
  • Specifically designed for the Sennheiser MKH8060
  • All OSIX & MINIX are now equipped with unbreakable plastic isolators
  • Elastic properties give isolation and firmness qualities to the suspensions
  • Cinela is considered the ultimate in mic isolation for boompole mounting
£252.00

Cinela OSIX CCM-LU Suspension for Schoeps CCM

Cinela OSIX CCM-LU Suspension for Schoeps CCM

£231.00
  • Compatible with the Schoeps CCM range of microphones
  • The body of the microphone only needs to be screwed on the integrated Lemo plug
  • The single small front isolator is completed by a back O'ring for dynamic balancing and security.
  • Compatibility with all Schoeps windscreens, including W20 (without fur). XLR3M output.
£231.60_value
£231.00

Cinela Osix CMIT Shockmount

Cinela Osix CMIT Shockmount

£252.00
  • For Schoeps CMIT 5U, CMC + CUT1, Sennheiser K6 + ME 62, K6 + ME 64 & Sanken CS-3e
  • All OSIX & MINIX are now equipped with unbreakable plastic isolators
  • Elastic properties give isolation and firmness qualities to the suspensions
  • Cinela is considered the ultimate in mic isolation for boompole mounting
£252.00

Cinela OSIX ORTF CCM Suspension for Schoeps ORTF CCM (with Lemo and XLR5M)

Cinela OSIX ORTF CCM Suspension for Schoeps ORTF CCM (with Lemo and XLR5M)

£348.00
  • This product is an adaptation of the Schoeps bar STCg for ORTF with CCM microphones
  • The body of the microphone is simply screwed to the Lemo plugs
  • The two axis swivel (Zephyx type) provides full orientation of the head
  • The cable 2 x Lemo + XLR5M is a full part of the suspension
£348.00

Cinela PIA-1 Windshield for Half Shotgun Microphones

Cinela PIA-1 Windshield for Half Shotgun Microphones

£816.00
  • The Reference PIA-1 is composed of the cage with single axis swivel and light XLR extension
  • The main fabric, a suspension of your choice and a fur (PIA-FUR-SP or PIA-FUR-LP)
  • Regarding lightness and efficiency, it is not simply possible to upgrade a PIA-1 to PIA-2 or PIA-3
£819.60_value
£816.00

Cinela PIA-2 Windshield for MS Pair

Cinela PIA-2 Windshield for MS Pair

£935.00
  • MS version of the Cinela PIA-1 windshield
  • Highly adapted to the MS Schoeps CMIT + CCM8 and other microphones
  • The Figure of 8 microphone is connected with a detachable cord
  • PIA-2S: Standard swivel, perfect for mono, PIA-2D: Double axis swivel, perfect for stereo
£937.20_value
£935.00

Cinela PIA-3 Windshield for Double MS System

Cinela PIA-3 Windshield for Double MS System

£1,044.00
  • Double MS version of the PIA-1 windshield
  • Highly adapted to the DMS Schoeps CMIT + CCM8 + CCM4 and other microphones
  • The CCM8 and CCM4 microphones are connected with detachable cords
  • PIA-3S: Standard swivel, perfect for mono, PIA-3D: Double axis swivel, perfect for stereo/DMS
£1,044.00

Cinela PIA-KELLY Rain Cover for PIA Windshield

Cinela PIA-KELLY Rain Cover for PIA Windshield

£190.00
  • Fully surrounding. Thick layer (3 cm) of large open cell light foam.
  • Very quick fitting. Velcro fastening.
  • Supplied with Nikwax spray to waterproof the regular fabric cover
  • Very good wind protection in rainy conditions.
£190.80_value
£190.00

Cinela PIA-RSM191 Windshield for Neumann RSM191

Cinela PIA-RSM191 Windshield for Neumann RSM191

£1,065.00
  • Specific PIANO adaptation for the Neuman RSM191.
  • DIN plug 7 pins (mic side) and XLR7M (swivel side).
  • Very thin and flexible cable.
  • Only requires a XLR7 extension to go to the power supply.
£1,065.60_value
£1,065.00

Cinela PIANI-1 Pianissimo Windshield w/ XLR 3-Pin

Cinela PIANI-1 Pianissimo Windshield w/ XLR 3-Pin

£729.00
  • Main cage and swivel two axis with a polycarbonate shell
  • Mono Suspension Module with elliptical isolators (MOD-E-OSIX): mike reference to be precised
  • Binder holder (2 detachable plugs). 3D Primary fabric
  • Fur: to be precised (FUR-LP: long piles; FUR-SP: short piles)
£729.60_value
£729.00

Cinela PIANI-2 Pianissimo Windshield w/ 5-Pin XLR For MS Pair

Cinela PIANI-2 Pianissimo Windshield w/ 5-Pin XLR For MS Pair

£849.00
  • Main cage and swivel two axis with a polycarbonate shell
  • Mono Suspension Module with elliptical isolators (MOD-E-OSIX): mike reference to be precised
  • Binder holder (2 detachable plugs). 3D Primary fabric
  • Fur: to be precised (FUR-LP: long piles; FUR-SP: short piles)
£853.20_value
£849.00

K-Tek 1/4 Wiggly Arm Mount

K-Tek 1/4 Wiggly Arm Mount

£15.00
  • K-Tek 1/4 Wiggly Arm Mount
  • (6″) on a delrin shoe with 1/4 x 20 stud on the other end
£15.00

K-Tek 3/8 Wiggly Arm Mount

K-Tek 3/8 Wiggly Arm Mount

£17.00
  • K-Tek 3/8 Wiggly Arm Mount
  • (6″) on a delrin shoe with 3/8 stud on the other end.
£17.00

K-Tek KSSA Shoe Step Adapter

K-Tek KSSA Shoe Step Adapter

£28.00
  • K-Tek KSSA Shoe Step Adapter
  • An accessory mount that provides 2" (5cm) of elevation above cameras
£30.00_value
£28.00

K-Tek KTCUB01 Topper for Sanken CUB-01

K-Tek KTCUB01 Topper for Sanken CUB-01

£30.00
  • K-Tek KTCUB01 Topper for Sanken CUB-01
  • Fur windscreen specifically designed for the Sanken Cub 01
£30.00

K-Tek KTFUZ Lavalier Windscreen

K-Tek KTFUZ Lavalier Windscreen

£19.50
  • Delivers adequate protection from inherent wind noise for lavalier microphones
  • The windscreen is simply placed over the capsule
  • Features long, faux fur and also protects against rustling and contact noise
  • Fits Sanken COS-11 and similarly sized lavalier microphones
£21.00_value
£19.50
1   2   3   4   5   6   7
Show All Products

Page 1 of 7:    191 Items
× Site Currency