APR-1 Audio Powering Rack System

Click to enlarge

£588.07

incl. VAT

Quick Facts

Suitability	Audio 2020 Radio Mics Only
Lightweight	760 gms
Outputs	2 Hirose 9.5VDC Regulated
Manufacturer	Hawk Woods
Model Number	HWBC-APR1

Product Description

Hawk Woods APR-1 Audio Powering Rack System

This unique product has been designed to provide an all in one powering solution using the Audio Ltd 2020 UHF Radio Mic system.

Main Features Include:

Suitable for Audio 2020 Radio Mics Only
Gold SMA Sockets for Antennas
Power Consumption of 70mA (130mA each UHF Receiver)
Radio Mic Power Switches
3A Multifuse / Aux\'s 1.1A
Flashing LED "Low Voltage Warning"
2 Hirose 9.5VDC Regulated Outputs
2 Hirose 12VDC Nominal Outputs
Colour Coded Audio Output Cables
User Selectable Battery Warning Level
Built-In Distribution Amplifiers

The APR-1 rack is made from a combination of aluminium and a lightweight high impact ABS material making this product both durable and lightweight at just 690gms. The APR-1 fits perfectly into most bags with all the necessary operating switches and controls provided on the top of the unit.

The APR-1 is fitted with Audio Ltd’s own filtered RF distribution amplifiers so that only two antennae are needed for maintaining perfect operation. Fitting Audio’s own DA\'s ensures you maintain superb sound quality with total compatibility.

Colour coded output audio cables are supplied and fitted directly to the rack. The output cables are fitted to the rack using spiral strain relief bushes and are also recessed to provide yet further protection.

DC outputs are provided on both sides of the APR-1 rack. On one end directly above the audio outputs there are two Hirose sockets offering unregulated power at a nominal battery voltage of 12 volts, these can be used for powering a mixer, a DAT machine or similar 12V equipment. On the opposite end of the APR-1 are a further two Hirose sockets offering a regulated 9.5 Volts intended for powering additional receivers or transmitters.

The APR-1 has been designed around a NP1 battery system. The NP1 battery slots directly and securely into the mid dle of the APR-1 giving a perfect balance to the sound mans bag system.

Most if not all NP1 types are suitable for use in the APR-1 this is due to the racks ability to regulate the voltage supply to the Audio receivers at a constant 9.5 volts.

For ease of use a main power switch and indication is fitted directly to the top of the rack, this can be used for powering down the whole system when not in use, saving the batteries power and therefore increasing running time.

To protect the battery from being over discharged and to warn of a low remaining battery capacity a flashing LED is also fitted adjacent to the main on-off switch. The level for indication is set for battery type via a slide switch recessed into the back panel.

If you are looking for a powering solution for Cx-Ir Radio Mics then why not check out the APR-2.

DC Input:
DC Outputs:
Other Aux:
Freq:

Weight:

Length:
Width:
Depth:

Any Voltage / NP1 Type
2 Hirose 12VDC
2 Reg Hirose 9.5VDC
UK Freq - 850~863Mhz
(Can Be Tuned to Order)

760g

22.5cm
13.5cm
5cm

For more information, please visit this products webpage.