Lectrosonics Complete SR System - UK Channel 38
STANDARD SYSTEM LISTED COMPRISES OF ONE SMb TRANSMITTER AND ONE SRa DUAL CHANNEL CAPABLE RECEIVER. YOU CAN CONFIGURE YOUR SYSTEM USING THE DROP DOWN MENU ABOVE - CHOOSE FROM THE FOLLOWING OPTIONS..
Lectrosonics SMb/E01 Wireless Microphone & IFB Transmitter
The tiny size of the single battery SMb/E01 model makes concealment easy, yet with up to 250 mW output, (Dealer configurable) it does not sacrifice performance. Switching power supplies throughout the design allow long battery life with NiMH batteries. Setup and control is simplified with membrane switches and an LCD interface. Multiple functions are clearly marked on the panel, with on-screen prompts on the LCD as reminders when another switch must be held or the selection is locked out.
The innovative servo bias input on the standard 5-pin connector provides a programmable, regulated voltage to accommodate a wide variety of electret microphones. Two bicolor LEDs make adjusting input levels for proper modulation easy and accurate.
The splash-proof housing is machined out of a single block of aluminum, which is then plated with a superhard, non-corrosive coating. The SMb/E01 transmitter is equally at home in theatre, television and film where temperature and environmental extremes require superior performance under the most demanding conditions.
Hands-free remote control is provided by using the unique RM.
Features
- Digital Hybrid Wireless™ Technology*
- Works with IFB and wireless microphone receivers
- Membrane switch control panel with LCD display
- 256 synthesized UHF frequencies
- 50 mW, 100mW, 250mW output power (Dealer Configurable)
- Wide input dynamic range
- DSP based pilot-tone signal
- Circulator/Isolator output stage
- Splash-proof, machined aluminum housing
- Non-corrosive, superhard finish
Lectrosonics SMDb/E01 Wireless Microphone & IFB Transmitter
The SMDb/E01 brings Digital Hybrid Wireless® technology to miniature transmitters in in a configuration essentially any wireless microphone application with a lavaliere microphone.
The tiny size of the dual battery SMDb/E01 model makes concealment easy, yet with up to 250 mW output (Dealer Configurable), it does not sacrifice performance. Switching power supplies throughout the design allow long battery life with NiMH batteries. Setup and control is simplified with membrane switches and an LCD interface. Multiple functions are clearly marked on the panel, with on-screen prompts on the LCD as reminders when another switch must be held or the selection is locked out.
The innovative servo bias input on the standard 5-pin connector provides a programmable, regulated voltage to accommodate a wide variety of electret microphones. Two bicolor LEDs make adjusting input levels for proper modulation easy and accurate.
The splash-proof housing is machined out of a single block of aluminum, which is then plated with a superhard, non-corrosive coating. The SMDb/E01 transmitter is equally at home in theatre, television and film where temperature and environmental extremes require superior performance under the most demanding conditions.
Hands-free remote control is provided by using the unique RM.
Features
- Digital Hybrid Wireless™ Technology*
- Works with IFB and wireless microphone receivers
- Membrane switch control panel with LCD display
- 256 synthesized UHF frequencies
- 50 mW, 100mW, 250mW output power (Dealer Configurable)
- Wide input dynamic range
- DSP based pilot-tone signal
- Circulator/Isolator output stage
- Splash-proof, machined aluminum housing
- Non-corrosive, superhard finish
- Dual battery for longer operating time SMa/E01
Lectrosonics SRa/E01 Dual Receiver
Two-channel slot-mount Digital Hybrid Wireless® diversity receivers. The SRa/E01 receiver offers two independent channels and fits into the standard video camera slots found on professional cameras. The two audio channels can feed separate inputs or can be mixed internally to feed a single input.
NOTE: Not all cameras have two audio channels enabled in the slot.
Optional adapter kits, shown above centre, are available for use with most brands of slot-mount equipped cameras, external mounting or bag use. The SR Battery Sled accessory shown above right, allows the SRa/E01 to be powered with L and M type rechargeable batteries.
Features
- Camera slot and stand-alone adapters
- Dual receiver design for two channel or single channel ratio diversity operation
- LCD with RF spectrum scanner
- SmartSquelchTM for noiseless muting
- 256 selectable UHF frequencies
- Dual channel SmartDiversityTM reception
- Single channel Ratio Diversity reception
- Automatic Power State Restoration
- DSP-based pilot tone squelch
- Rear Panel Audio Outputs
  
Lectrosonics SRa5P/E01 Dual Receiver
Two-channel slot-mount Digital Hybrid Wireless® diversity receivers. The SRa5P/E01 receiver offers two independent channels and fits into the standard video camera slots found on professional cameras.
The two audio channels can feed separate inputs or can be mixed internally to feed a single input.
NOTE: Not all cameras have two audio channels enabled in the slot.
The SRa5P variant is equipped with an external audio output for cameras that only have one audio input in the slot. Both audio channels can be connected with external cable (MCSR/SPXLR2).
Note: An SRa/E01 may be converted to an SRa5P/E01 by an authorized Lectrosonics Service Center.
- Camera slot and stand-alone adapters
- Dual receiver design for two channel or single channel ratio diversity operation
- LCD with RF spectrum scanner
- SmartSquelchTM for noiseless muting
- 256 selectable UHF frequencies
- Dual channel SmartDiversityTM reception
- Single channel Ratio Diversity reception
- Automatic Power State Restoration
- DSP-based pilot tone squelch
- Rear Panel and Front Panel Audio Outputs
|
