Pearl MSH10 Stereo Microphone with Rycote Windshield Kit 2 & Stereo XLR Bundle
We've paired the Pearl MSH 10 with a customised Rycote Windshield 2 Kit with 5-Pin connbox 4 and 5-Pin Female XLR to 2 x Male XLR cable.
The single lyres have been replaced with a 68 Shore Duo Lyre system. This is because the MSH 10 has a diameter of 28mm which will not fit into the single lyre.
The Connbox has also been replaced with a Connbox CB4 which is the best choice for the Pearl MSH 10. This outputs in a 5-pin Male XLR connector.
The 5-pin Female XLR to 2 x Male 3-pin XLR cable allows you to connect this as a Left and Right stereo pair to your recorder.
Pearl MSH 10 Mid-Side Microphone
The Pearl MSH 10 is specially made for MS recording of TV, Video & film Production. Ita very clever microphone. It's mounted a short shotgun hypercardioid in the front and a figure-of-eight capsule behind it. Together they deliver the centre sound and the stereo surrounding/room/ambiance.
The MSH 10 outputs the M and S signals separately, so the engineer can fine tune the sound at any stage during production, from super mono to any degree of MS stereo.
MS stereo is superior to most other stereo recording techniques, because it's totally mono compatible. Another great benefit is that the engineer can determine, at any stage in the production process, how the final sound will be (using the separate M and S signals in Pearl MSH 10).
No extra devices are needed besides phantom power. The amplifier is very low noise and an LED confirms that phantom power is connected. The MSH 10 is very lightweight, which makes them ideal for use with a pole.
Microphone shockmount 1930
Individual frequency graph
Rycote Windshield Kit 2
The Modular Windshield WS 2 Kit is suitable for small diaphragm condenser microphones from 121mm up to 160mm in length with a 19-25mm diameter.
- Flexible, complete windshield and suspension package, which provides varying levels of windshielding for numerous microphone configurations.
- The iconic Windshield Kit is the industry standard, and leads the way in windshielding and suspension technology.
The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.
This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.
Our suspensions provides complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs.
The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.
The Windjammer introduced by Rycote in 1985, is high quality synthetic fur covers, designed to fit perfectly over the Modular Windshield. It gives an additional 20dB of wind noise attenuation. Fitted with a drawstring & toggle to allow snug and easy fitting. Modular Windshield Kits, including zipped Windjammer are also available on request.