WisyCom Kit Deal - MCR42S3-HPN w/ MTP41S or MTP40S + FREE TX
WisyCom Kit Deal - MCR42S3-HPN w/ MTP41S or MTP40S + FREE TXWisyCom Kit Deal - MCR42S3-HPN w/ MTP41S or MTP40S + FREE TXWisyCom Kit Deal - MCR42S3-HPN w/ MTP41S or MTP40S + FREE TX
WisyCom Kit Deal - MCR42S3-HPN w/ MTP41S or MTP40S + FREE TXWisyCom Kit Deal - MCR42S3-HPN w/ MTP41S or MTP40S + FREE TX

WisyCom Kit Deal - MCR42S3-HPN w/ MTP41S or MTP40S + FREE TX

    • Purchase the MCR-42S3-HPN with a choice of MTP41S or MTP40S
    • And get ANOTHER TX absolutely FREE!
    • Available in Low band (470 to 640 MHz) or Mid Band (510 to 698 MHz)
    • Also includes branded hard case
  • More Details...

Model:  WIS-KITDEAL-40-L
Manufacturer:  WisyCom

TX Model:  
Band:  
£4,620.00
£4,080.00
(£3,400.00 Exc. VAT)
+
Apply For Finance
Related Products
Wisycom MTB40S Plug-On XLR Transmitter

Wisycom MTB40S Plug-On XLR Transmitter

£1,362.00
  • Up to 232 MHz bandwidth in 470/798 MHz range
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Selectable companding systems: ENR (noise optimized) / ENC (voice optimized)
  • P48 phantom power for condenser microphones
£1,362.00

Pinknoise Custom Output & Power Cable Set for Wisycom MCR42

Pinknoise Custom Output & Power Cable Set for Wisycom MCR42

£165.00
  • Pinknoise Custom Wisycom MCR42 Power Cable Set
  • Includes 2 x Right Angled TA3 to Male 3-Pin XLR's
  • And 1 x Right Angled to Straight Hi-Rose cable
  • All cables are hand made with the best quality cables and connectors
£165.00

Sanken COS-11D PT Lavalier Microphone (w/ Options)

Sanken COS-11D PT Lavalier Microphone (w/ Options)

£270.00
  • Overcomes digital transmitter RFI. Water Resistant. Durable Design
  • Great Clear and Rich Sound. Improved Moisture Resistance
  • Original Vertical Diaphragm Design
  • Optimized for the Human Voice. 4 Color Choices
£348.48_value
£270.00

DPA d:screet™ CORE 4060 Omni Lavalier Microphone

DPA d:screet™ CORE 4060 Omni Lavalier Microphone

£360.00
  • CORE by DPA minimizes distortion, expands dynamic range & sounds better
  • For Normal SPL gets a 6 dB increase in both THD and dynamic range
  • Total harmonic distortion: < 1% THD up to 129 dB SPL peak
  • Dynamic range: Typ. 106 dB
£366.00_value
£360.00

DPA d:screet™ CORE 4061 Omni Lavalier Microphone

DPA d:screet™ CORE 4061 Omni Lavalier Microphone

£360.00
  • CORE by DPA minimizes distortion, expands dynamic range & sounds better
  • For Loud SPL gets a 14 dB increase in both THD and dynamic range
  • Total harmonic distortion: < 1% THD up to 137 dB SPL peak
  • Dynamic range: Typ. 111 dB
£366.00_value
£360.00

DPA d:screet™ CORE 4063 Omni Lavalier Microphone

DPA d:screet™ CORE 4063 Omni Lavalier Microphone

£360.00
  • CORE by DPA minimizes distortion, expands dynamic range & sounds better
  • For Loud SPL & DC gets a 12 dB increase in both THD and dynamic range
  • Total harmonic distortion: < 1% THD up to 135 dB SPL peak
  • Dynamic range: Typ. 109 dB
£366.00_value
£360.00

DPA d:screet™ 4060 Omnidirectional Lavalier Microphone, Hi-Sens

DPA d:screet™ 4060 Omnidirectional Lavalier Microphone, Hi-Sens

£336.00
  • Extremely rugged and reliable
  • Exceptional audio quality with low noise and high sensitivity
  • Adapts to all pro wireless systems
  • Featuring MicroDot to a variety of available connectors
£354.00_value
£336.00

Countryman B6 Omnidirectional Miniature Lavalier Microphone

Countryman B6 Omnidirectional Miniature Lavalier Microphone

£320.00
  • With a diameter of only 0.1” (2.5 mm) the mic capsule virtually disappears when worn
  • Aramid strength members & engineered alloys ensure extreme tensile & flex strength cable
  • Precision-matched to theatre make-up shades to blend with a wide range of skin tones or clothing
  • Water-sealed so you can use them in the hair or against the skin without "sweat-outs"
£363.60_value
£320.00

Countryman EMW Omni Classic Lavalier

Countryman EMW Omni Classic Lavalier

£185.00
  • Best mic for hiding under clothing in film, theater and TV production
  • General purpose lavalier for churches, schools, interviews, news
  • Immersability allows use near water or in intense weather
  • Very low rubbing noise. Outstanding sound quality
£199.20_value
£185.00

Kit Includes

1 x WisyCom MCR42S3
1 x WisyCom BPA42HPN
1 x Carry Case
2 x WisyCom MTP40S
OR
2 x WisyCom MTP41S

WisyCom Kit Deal - MCR42S3-HPN w/ MTP41S or MTP40S + FREE TX

Purchase the MCR-42S3-HPN with a choice of MTP41S or MTP40S and get ANOTHER TX  for FREE!

Available in Low band (470 to 640 MHz) or Mid Band (510 to 698 MHz).

Please select your choice of transmitter and Low (L) or Mid (M) band from the drop down box above.


WisyCom MCR-42S3 Dual Diversity Receiver

Dual True Diversity - UHF Miniature Camera Receiver Modular execution "stand-alone" or "slot-in" (Panasonic, Sony, Grass Valley)

MCR42 is a camera receiver designed for best-in-class performances. Four receivers are internally coupled by two in a real TRUE DIVERSITY CONFIGURATION. Its front end has a chain of microcontrolled-driven movable filters to allow BROADBAND OPERATION up to 240 MHz with great selectivity.
A powerful low consumption DSP gives you the best of analogue and digital technologies in an hybrid approach for smooth operations, high coverage and with our patented PTT (push to talk) already integrated.

Features

  • Dual true diversity in a modular stand-alone or slot-in format.
  • Switching bandwidth up 240 MHz in the UHF range.
  • DSP based audio processing for unbeatable audio and digital outputs with our PTT (push to talk) patented technology already integrated.
  • 40 groups of 60 frequencies fully user programmable.
  • Multicompander operations
  • Infrared interface for programming and transmitter synchronization
  • Wisycom exclusive digital sub-carrier telemetry technology allows:
        remote TX battery monitoring
        tone-squelch operating
        PTT function (An optional back-panel module is available, with the secondary intercom output)
  • Easy setup and operation thru a OLED display
 

WisyCom MTP40S Wideband Bodypack Transmitter

MTP40S is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to OLED display, dedicated buttons and a joggle selector. MTP40S benefit also of the latest Wisycom RF technology along with an enhanced robustness against noise and inter-modulation.

Improved Features:

  • New white OLED display (128 x 32 pixels)
  • Integrated HW limiter

Features

  • Up to 232 MHz bandwidth in 470/698 MHz range (others on request)
  • Input dynamic extension with an integrated HW limiter (30 dB above peak)
  • Enhanced robustness against self-interferences and antenna performances thru a proprietary “intermodulation cancellation” circuit
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (80g without batteries)
  • User selectable multi-companding systems:
        ENR (noise optimized)
        ENC (voice optimized)
  • Battery: 1 AA Alkaline, rechargeable NiMH or Lithium
  • Autonomy:
        > 10h @ 50mW output power
        > 14h @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 85dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
  • 48V phantom power to use wired mic thru the PHA48 accessory

WisyCom MTP41S Wideband Bodypack Transmitter

The WisyCom MTP41 is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to OLED display, dedicated buttons and a joggle selector. MTP41 benefit also of the latest Wisycom RF technology along with an enhanced robustness against noise.

Features

  • Up to 188 MHz bandwidth in 470/698 MHz range. Please select from option menu above
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (60g without batteries)
  • User selectable multi-companding systems: ENR (noise optimized)/ ENC (voice optimized)
  • Battery: 1 AA Alkaline or rechargeable NiMH
  • Autonomy: 5h @ 50mW output power/ 7h @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 80dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments

MCR42 Specifications

Frequency ranges N 470 to 700 MHz
Switchable channels 40 groups of 60 channels fully user programmable
Switching-window Up to 232 MHz
Frequencies Microprocessor controlled frequency synthesizer circuit, with 25 kHz minimum step. The frequencies are easily PC reprogrammable with the optional UPK Mini Programming Kit
Frequency error < ± 2.5 ppm, in the rated temperature range
Temperature range -10 to +55 °C
Modulation FM, with 50 μs de-emphasis
Nominal deviation ±40 kHz (Max. operating dev. = ± 60 kHz)
Antenna input impedance 50 ohm SMA type (SWR < 1:2; typ. 1:1.4)
Sensitivity
    • 2 μV ( 0 dBμV), for SND/N > 58 dB
    • 5 μV (14 dBμV), for SND/N > 98 dB

in the whole switching window

Amplitude response < 0.5 dB (RF input sig.:6 dBμV to 100 dBμV)
Co-channel rejection > 2.5 dB
Adjacent chan. selectivity > 80 dB typical (for ch. spacing ≥ 400 kHz)
Spurious rec. rejection > 100 dB
IF image rejection > 90 dB
Intermod. rejection > 76 dB
IIP3 > +10 dBm typical
Spurious emissions < 2 nW (typical = 0.1 pW)
Noise Reduction system ENR (Wisycom Extended-NR), noise optimized
ENC (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
Others, compatible with most systems, through an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth 30 Hz to 20 kHz
Frequency response ± 0.5 dB in the 30 Hz to 19 kHz range
Distortion 0.3 % typical
SND/D ratio (Analogue) 110 dB typical [*]
SND/D ratio (AES3) >125 dB typical [*]
POWER LEDs

2 multicolor RGB LEDs to easy indicate Rx1 & Rx2 power status:

  • GREEN, if “Receiver ON” with external power supply
  • RED, if LEDs blinking indicates power supply status of transmitter
  • slow blinking, at 25% battery capacity
  • fast blinking, at 12.5% battery capacity
RF LEDs

2 multicolor RGB LEDs to easy indicate Rx1 & Rx2 RF status

  • RED, if both receivers RF level is under squelch level
  • GREEN, if signal above squelch level & antenna A (green) is active
  • BLUE, if signal above squelch level & antenna B (blue) is active
  • YELLOW, if signal above squelch and both antenna are used
AUDIO LEDs

2 multicolor RGB LEDs to easy indicates Rx1 & Rx2 audio status

  • RED, if audio is muted because of squelch (or tone squelch if active)
  • GREEN, if audio is active and tone squelch present
  • BLUE, if audio is active and tone squelch not present
Front buttons Simple operation with 4 buttons to quickly monitor and setup the receiver
One touch function for frequency scan and sync function
Powering
  • External = 5 to 18 Vdc (1.5 W max)
  • Autonomous. = with optional BCA 42 Battery Module (5 x IEC-LR6 1.5V size-AA alkaline or rechargeable batteries)
Dimensions “Slot-in” end plate = 68 x 18 x 115 mm, “Stand-alone” end plate. = 68 x 18 x 135 mm
Weight 180g approx
Analogue Audio Output
  • Audio line-output electronically balanced on two 3 pin mini-XLR Female connector
  • Audio line-output level Adjustable in one dB steps between -20 and +6 dBu (nominal) and MAX +12 dBu (peak deviation)
  • Audio line-output imped. ≤ 200 ohm
Push to Talk (PTT) Audio Output electronically balanced on a 5 pin mini-XLR Male connector
Digital Audio Output
  • electronically balanced on 3 pin mini-XLR Male connector
  • AES3 @ 48 kHz

MTP40s Specifications

Switchable channels 2400 allocated by 40 groups of 60 channels (in specific frequency range), quickly selectable with dedicated buttons
Switching window Up to 232 MHz, depending on band 
1 470 ÷ 640 MHz
2 566 ÷ 798 MHz
3 510 ÷ 698 MHz
T 794 ÷ 798 MHz (For Thailand Only)
other ranges based on Country restriction (see Variants)
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability ± 2,5 ppm (in the rated temperature range)
Temperature range -10 ÷ +55 °C
Max RF power ▪ 10 mW (ERP) (to respect some local norm)
▪ 50 mW (ERP) (note: in some countries middle power can be disabled, for local norm!)
▪ 100 mW (ERP) (note: in some countries high power can be disabled, for local norm!)
Spurious emissions < 2 nW
Modulation wideband FM, with pre-emphasis
Nominal deviation ±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature MTP40S transmits also a digitally modulated sub-carrier, suitable for: 
▪ tone-squelch operating ▪ remote battery monitoring ▪ optional PTT (push to talk) operation
AF input connector LEMO option Configurable on ‘mic’ display menu in 5 options:
▪ ’2 wires’: gain selectable -40 ÷ +40 (-54 dBu ÷ +26 dBu peak), no bias voltage
▪ ‘2 wires + bias’: gain selectable -20 ÷ +40 (-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
▪ ‘3 wires: gain selectable -40 ÷ +40 (-54 dBu ÷ +26 dBu peak)
▪ ‘2 wires & phantom’ gain selectable -40 ÷ +40 (-54 dBu ÷ +26 dBu peak),
▪ ‘2 wires + bias & phantom’: gain selectable -20 ÷ +40,(-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
AF input level 80 dB adjustable range from -60 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max. input level +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-Reduction ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth ▪ 45 Hz ÷ 21 KHz (3dB)
▪ 55 Hz ÷ 20 KHz (1dB)
Distortion < 0.3 % (0.15 % typ.)
Signal-to-noise ratio ▪ typ. 115 dB (A)rms with 40 kHz deviation
▪ typ. 121 dB (A)rms with 56 kHz deviation
Led RGB Led indication (red, green and blue):
▪ Wireless transmission status Green when RF transmission power is on, Red when RF transmission power is off. Blue when the input signal is above the peak threshold
▪ Modulation peak (if activated & limiter disabled): RED
▪ Battery lifetime status: GREEN – steady (> 25%) – slowly blinking (< 25%) - quickly blinking (<12%)
▪ Ptt status: RED if active
Display High contrast OLED (Organic light-emitting diode) white display (128 x 32 pixels)
8 step battery lifetime indication: 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 2 of the AF connector can be setup to an external push button
Power supply 2 AA size batteries (Alkaline, rechargeable NiMH or Lithium)
Battery life (2 AA alkaline)
▪ approx. 14 hours @ 10mW continuous working
▪ approx. 10 hours @ 50mW continuous working
▪ approx. 7 hours @ 100mW continuous working
Dimensions 73.1 x 64.5 x 21.6 mm (Height-Width-Depth) with clip
Weight Approx. 85 g. without batteries (135g with batt.)

MTP41S Specifications

Switchable channels 2400 allocated by 40 groups of 60 channels (in specific frequency range), quickly selectable with dedicated buttons
Switching window Up to 232 MHz, depending on band
1 470 to 640 MHz
2 566 to 798 MHz
3 510 to 698 MHz
Finish/Colour Black or Titanium Grey
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability ± 2,5 ppm (in the rated temperature range)
Temperature range -10 to +55 °C
Max RF power
  • 50 mW (ERP) when high power selected
  • 10 mW (ERP) when low power selected
Spurious emissions < 2 nW
Modulation Wideband FM, with 50 µs pre-emphasis
Nominal deviation ±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature

The MTP40S transmits a digitally modulated sub-carrier for:

  • tone-squelch operating
  • remote battery monitoring
  • optional PTT (push to talk) operation
AF input connector LEMO option

Configurable on ‘mic’ display menu in 5 options:

  • ‘2 wires’: gain selectable -40 to +40 (-54 dBu to +26 dBu peak), no bias voltage
  • ‘2 wires + bias’: gain selectable -20 to +40 (-54 dBu to + 6 dBu peak), 5.5 V on 4k7 bias supply
  • ‘3 wires:’ gain selectable -40 to +40 (-54 dBu to +26 dBu peak)
  • ‘2 wires & phantom’ gain selectable -40 to +40 (-54 dBu to +26 dBu peak)
  • ‘2 wires + bias & phantom’: gain selectable -20 to +40,(-54 dBu to + 6 dBu peak), 5.5 V on 4k7 bias supply
AF input level 80 dB adjustable range from -60 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max. input level +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-Reduction ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack and Recovery time, voice optimized & with reduced pre-emphasis
AF bandwidth
  • 45 Hz to 21 KHz (3dB)
  • 55 Hz to 20 KHz (1dB)
Distortion < 0.3 % (0.15 % typ.)
Signal-to-noise ratio
  • typ. 115 dB (A)rms with 40 kHz deviation
  • typ. 121 dB (A)rms with 56 kHz deviation
Led

Led indication with bi-color led (red & green) on wireless power switch:

  • Wireless transmission status: GREEN on/off
  • Modulation peak (if activated): RED
  • Battery lifetime status: GREEN – steady (> 25%) – slowly blinking (< 25%) - quickly blinking (<12%)
  • PTT status: RED if active
Display High contrast OLED (Organic light-emitting diode) bi-color display (96 x 36 pixels)
8 step battery lifetime indication: 7 bars (100%, 87%, 75%, 63%, 50%, 38%, 25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 3 of the AF connector can be setup to an external push button
Power supply 2 AA size batteries (Alkaline, rechargeable NiMH)
MTP40 Battery life

(2 AA alkaline)

  • approx. 10 hours @ 50mW continuous working
  • approx. 14 hours @ 10mW continuous working
Dimensions 73 x 61 x 17.5 mm (Height-Width-Depth, without clip)
Weight Approx. 80 g. without batteries (120g with batt.)

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Product Reviews

Be the first to Write a Review for this item!

× Site Currency