Wisycom Mid Band Complete Kit Bundle w/ Sanken Cos-11s

    • Includes WisyCom MCR42S, WisyCom BPA42PTT, WisyCom MTP40S (x2)
    • TA3F Right Angled Cables (x2), Hirose Right Angled Cable, Cos-11 (x2)
    • Sanken Cos-11 (x2) 3-Pin Lemo - Please select this option from the drop down box
    • Frequency Bandwidth: 470 - 700 MHz MCR42 - MTP40s 510-698Mhz
  • More Details...

Manufacturer:  WisyCom

(£4,995.83 Exc. VAT)
Apply For Finance


Only 1 in stock  

Only 1 in stock

Related Products

WisyCom MCR-42S Dual Diversity Receiver

Kit Includes

1 x WisyCom MCR42S
1 x WisyCom BPA42PTT
2 x WisyCom MTP40S
2 x TA3F RA Cables
1 x Hirose RA Cable
2 x Sanken COS-11

Dual True Diversity - UHF Miniature Camera Receiver Modular execution "stand-alone" or "slot-in" (Panasonic, Sony, Grass Valley)

MCR42 is a camera receiver designed for best-in-class performances. Four receivers are internally coupled by two in a real TRUE DIVERSITY CONFIGURATION. Its front end has a chain of microcontrolled-driven movable filters to allow BROADBAND OPERATION up to 240 MHz with great selectivity.
A powerful low consumption DSP gives you the best of analogue and digital technologies in an hybrid approach for smooth operations, high coverage and with our patented PTT (push to talk) already integrated.


  • Dual true diversity in a modular stand-alone or slot-in format.
  • Switching bandwidth up 240 MHz in the UHF range.
  • DSP based audio processing for unbeatable audio and digital outputs with our PTT (push to talk) patented technology already integrated.
  • 40 groups of 60 frequencies fully user programmable.
  • Multicompander operations
  • Infrared interface for programming and transmitter synchronization
  • Wisycom exclusive digital sub-carrier telemetry technology allows:
        remote TX battery monitoring
        tone-squelch operating
        PTT function (An optional back-panel module is available, with the secondary intercom output)
  • Easy setup and operation thru a OLED display

WisyCom MTP40S Wideband Bodypack Transmitter

MTP40S is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to OLED display, dedicated buttons and a joggle selector. MTP40S benefit also of the latest Wisycom RF technology along with an enhanced robustness against noise and inter-modulation.

Improved Features:

  • New white OLED display (128 x 32 pixels)
  • Integrated HW limiter


  • Up to 232 MHz bandwidth in 470/798 MHz range (others on request)
  • Input dynamic extension with an integrated HW limiter (30 dB above peak)
  • Enhanced robustness against self-interferences and antenna performances thru a proprietary “intermodulation cancellation” circuit
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (80g without batteries)
  • User selectable multi-companding systems:
        ENR (noise optimized)
        ENC (voice optimized)
  • Battery: 1 AA Alkaline, rechargeable NiMH or Lithium
  • Autonomy:
        > 10h @ 50mW output power
        > 14h @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 85dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
  • 48V phantom power to use wired mic thru the PHA48 accessory

WisyCom BPA42-PTT Rear Panel for MCR-42

The standalone socket BPA 42 PTT supplies the following connections:

Analogue Audio Output (Line 1 & 2)

  • Audio line-output 1 & 2 : electronically balanced on two 3 pin mini-XLR Female connector
  • Audio line-output level : Adjustable in a one dB step between -20 and +6 dBu (nominal) and MAX +12 dBu (peak deviation)
  • Audio line-output imped. : ≤ 200 ohm.

Push to Talk (PTT) Audio Output (Com)

  • PTT line-output 1 & 2 : electronically balanced on a 5 pin mini-XLR Male connector

Digital Audio Output AES3

  • Digital line-output 1 & 2 : electronically balanced on 3 pin mini-XLR Male connector
  • Digital line-output : AES3 @ 48 kHz

Pinknoise Wisycom Power and Output Cable Set 

  • Right angled TA3 to XLR cable set hand made with high quality connectors and cable.
  • Right angled Hirose to Hirose cable set for powering.

Pinknoise custom cables and mic terminations are always super high quality and meticulously created with sound quality, performance and durability in mind. That's a Pinknoise guarantee!

Sanken Cos-11 Lavalier Microphone

One of the industry standards for film and broadcast speech recording. These are hard wired with the 3-Pin Lemo Connector to connect with the MTP40S and MTP41S transmitters.

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Product Reviews

Be the first to Write a Review for this item!

× Site Currency