3.5mm Mini-Jack (DSLR)

• TinyMike adaptor with 3.5 TRRS right angle plug
• Binder plug to TRRS plug, padded
• Binder 3-pin to 3.5 mm TRRS right angle plug
• Length: Approx. 27 cm. Colour: Marked yellow

• TinyMike adaptor with 3.5 TRRS right angle plug.
• Binder plug to right angled TRRS plug, unpadded
• Binder 3-pin to 3.5 mm TRRS right angle plug
• High sensitivity. Unpadded

• Connect your 3.5mm video microphones into a XLR based camera or audio recorder.
• Adapts the 24/48V phantom power supplied by the XLR input it’s plugged into and converts it to a 3-5V Plug-In Power signal
• The XLR connector is only a little over half the length of an average XLR connector in length
• Built in 15” coiled 3.5mm cable

• Designed for the DR-10CS
• 3.5mm locking connector
• Connection Choice of 3-pin Lemo or TA5

• High Quality NEUTRIK 3.5mm mini jack plugs
• Optional Right angle plug to prevent getting damaged or easily unplugged
• Heat-shrinked. Lead free solder joints
• High Quality cable for excellent sound quality

• This is a Jack Cable Adapter for Sennheiser microphones
• 3.5mm Sennheiser Locking Socket to a Standard 3.5mm Jack (Right Angle)
• Perfect for using a Sennheiser Lav mic to any portable recorder or DSLR Camera
• The Cable is 15cm in length

This custom cable is designed to replicate the Rode SC4. It's purpose is to allow microphones with a 3.5mm output to connect to TRRS smartphones & tablets

• Audio output from the WIsycom MPR52 to any DSLR with a 3.5mm socket
• TA5 Female to 3.5mm Male
• Length Size: 34cm
• Flexible Shielded Cable

• Designed to provide two track stereo recording via a 3.5mm splitter with two mic inputs
• Can directly interface dual signals from sources such as the H4n headphone amplifier
• Ideal if you wish to use 2 separate microphones
• You can use this cable to individually access the right and left inputs for the 2 mics

• Main cable length: approx 21.5cm
• Straight headphone output length: 8.5cm
• 3.5mm -25db attenuation on gold-plated Neutrik plug.
• 3.5mm stereo socket for headphone feed.

• Extension cable designed for lav mics
• Measuring 6m / 20'
• With gold plated contacts
• 1 year warranty

• High-quality shielded patch cable
• 321mm (12.6”) long
• Integrated strain relief sleeve
• Junction box for cable management