Lectrosonics SSM Transmitter

Lectrosonics SSM Transmitter
Lectrosonics SSM TransmitterLectrosonics SSM TransmitterLectrosonics SSM Transmitter

SSM Miniature Digital Hybrid Wireless® Belt-Pack Transmitter

Please note: The connector for the SSM is 3-Pin Lemo

The SSM is ideal in theatrical or any other production where concealment in costuming is required. In spite of its tiny size, the transmitter offers an extensive feature set and performance on par with all of the Digital Hybrid Wireless® models.

Frequencies are selectable in 100 kHz or 25 kHz steps across a maximum tuning range of 76.7 MHz. This yields a total of 3072 available frequencies across three standard frequency blocks. The tuning range varies in other blocks to meet applicable frequency allocations.

The servo bias input accepts mic or line level signals with a wide range of gain adjustment in 1 dB steps. Accurate LED indications on the keypad allow precise gain adjustments to be made for the maximum signal to noise ratio and minimum distortion. The limiter in the preamp can cleanly handle signal peaks over 30 dB above full modulation, allowing the input gain to be set high enough to achieve the maximum signal to noise ratio, yet provide protection against input overload.

Compatibility with earlier analog Lectrosonics receivers, Lectrosonics IFB receivers and some receivers from other manufacturers is provided by DSP emulation modes selected in the LCD menu.

Key Features

  • Tunable across three standard frequency blocks (76.8 MHz)
  • Digital Hybrid Wireless® audio for compandor-free digital quality
  • Selectable 25 or 50 mW RF power
  • Compatibility modes for use with analog receivers
  • 25 or 100 kHz tuning steps for up to 3072 selectable frequencies
  • Wide range input gain control in 1 dB steps
  • Quick change Lithium-ion rechargeable battery
  • Audio coupled remote control


RF Power output US/E01/E01-B2/X: Selectable; 25 or 50 mW
E02: 10mW
E06: 50 or 1000 mW EIRP
Compatibility modes US: Nu Hybrid, Mode 3, IFB
E01: Digital Hybrid, Mode 3, IFB
E01-B2: Digital Hybrid, Mode 3, IFB
E02: Digital Hybrid, Mode 3, IFB
E06: 100 Series, 200 Series, Mode 3, Digital Hybrid, IFB, Mode 6, Mode 7
X: 100 Series, 200 Series, Mode 3, Digital Hybrid, IFB, Mode 6, Mode 7
Pilot tone 25 to 32 kHz; 3.5 kHz deviation (nu Hybrid Mode); ± 50kHz max. (Digital Hybrid Mode)
Frequency Stability ± 0.002%
Spurious radiation US: Compliant with ETSI EN 300 422-1 v1.4.2 941/E01/E02/E06/X: 60dB below carrier
Equivalent input noise -120 dBV (A-weighted)
Input level Nominal 2 mV to 300 mV, before limiting. Greater than 1V maximum, with limiting.
Input impedance Mic: 300 or 4.5k ohm; selectable
Line: greater than 100 k ohm
Input limiter DSP controlled, dual envelope "soft" limiter with greater than 30dB range
Gain control range 44dB; digital control
Modulation indicators Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modultation
Controls Side panel membrane switches w/ LCD for power on/off and all setup and configuration controls
Audio input jack LEMO 00 series 3-pin
Antenna Galvanized steel, flexible wire
Battery Lithium-ion 3.6 V 1000 mAH; LB50 battery pack
Battery life 6 hours per chage
Weight 2.3 ounces (65.2 grams), including battery pack
Dimensions (housing) 2.3 x 1.5 x 56in. (58.4 x 38 x 14.2mm)
Emission designator US: 110KF3E
E01/E01-B2/ E02/ E06/X: 180KF3E

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£1,479.00 £1,998.00
Saving Of:  £519.00 (26%)
(£1,232.50 Exc. VAT)
Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  LECT-TX-SSM-A1
Part No.:  SSM/E01 (A1)
Manufacturer:  Lectrosonics

Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.


We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.


Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.30am - 5.30pm, to discuss these options and find out what's available to you.

We accept PayPal, Visa, Mastercard, Maestro, American Express

Lectrosonics SSM Transmitter

Lectrosonics Silicone Cover for SSM Transmitter
Lectrosonics Silicone Cover for SSM Transmitter
  • Silicone Cover for Lectrosonics SSM Transmitter
  • Protects transmitter from moisture and dust
  • Two-part design makes it easy to install and remove
  • Cut outs for antenna and input jack
8 in stock now  8 in stock now
£30.00  £36.00
Lectrosonics CCMINI Soft Padded Carry Case
Lectrosonics CCMINI Soft Padded Carry Case
  • Lectrosonics soft sided case
  • Padded and zipped case
  • Carry case perfect for compact transmitters and receivers
  • Keeps your units safe whilst on the move
8 in stock now  8 in stock now
£39.00  £42.00
Lectrosonics SRC + 2x SSM Kit w/ External Back Plate Adapter + TX Accessories Bundle
Lectrosonics SRC + 2x SSM Kit w/ External Back Plate Adapter + TX Accessories Bundle
  • Lectrosonics SRC Dual-Channel Receiver
  • Lectrosonics Back Plate Adaptor for the SRC (SR EXT)
  • 2x Lectrosonics SSM Transmitters
  • Plus cables and cases for your units
1 in stock now  1 in stock now
£5,499.00  £7,659.30
Lectrosonics SRC Dual-Channel Slot Mount ENG Receivers
Lectrosonics SRC Dual-Channel Slot Mount ENG Receivers
  • Fits camera “slots,” Lectrosonics Duopack adapter and Octopack multicoupler
  • Operates stand-alone with various adapters
  • Tunes over a 75 MHz range* (3 blocks)
  • Digital Hybrid Wireless® with compatibility modes for use with other transmitters
2 in stock now  2 in stock now
£2,350.00  £3,198.00
Pinknoise Custom Output & Power Cable Set for Lectrosonics SRC (w/SREXT)
Pinknoise Custom Output & Power Cable Set for Lectrosonics SRC (w/SREXT)
  • Pinknoise Custom Lectrosonics SRC Power Cable Set
  • Includes 2 x Right Angled TA3 to Male 3-Pin XLR's
  • And 1 x Right Angled Lectro Locking Jack to Straight Hi-Rose cable
  • All cables are hand made with the best quality cables and connectors
Only 3 in stock  Only 3 in stock
BubbleBee Lav Concealer for DPA 6060/6061
BubbleBee Lav Concealer for DPA 6060/6061
  • Mounting for DPA 6060 or 6061 Lavalier Microphones
  • Provides many options for mounting DPA lav mics
  • Moulded rubber compound made for excellent vibrations and friction absorption
  • Available in Matt Black or Matt White finish
Only 27 in stock  Only 27 in stock
× Site Currency