£16.50 - High quality Pinknoise Custom cable
- Made with Rean TA3 female plug to Neutrik XLR 3 pin male plug
- Standard length is 40cm
- These cables are colour coded for your convenience
|
|
£16.50 - High quality Pinknoise Custom cable
- Made with Rean TA3 female plug to Neutrik XLR 3 pin female plug
- Standard length is 40cm
- These cables are colour coded for your convenience
|
|
£36.00 - 5 Different connectors available
- Easy to use and swap out Micon system
- Made by Active Audio / Da Cappo
|
|
£24.00 - TinyMike adaptor with 3.5 TRRS right angle plug
- Binder plug to TRRS plug, padded
- Binder 3-pin to 3.5 mm TRRS right angle plug
- Length: Approx. 27 cm. Colour: Marked yellow
|
|
£24.00 - TinyMike adaptor with 3.5 TRRS right angle plug.
- Binder plug to right angled TRRS plug, unpadded
- Binder 3-pin to 3.5 mm TRRS right angle plug
- High sensitivity. Unpadded
|
|
£114.00 - QXS range up to QXS5100 can be fitted with an internal coiled cable
- Screw-on boom pole end piece with embedded mono XLR Connection
- With straight outlet for ENG & documentary boom poles
- Length of 75 up to 300 cm for Ambient Quickpole QXS580
|
|
£72.00 - External Lockit power cable. Hirose to Lemo 5-pin.
- 4-pin Hirose to 5-pin Lemo
- Length: Approx. 50 cm
- Colour: Red
|
|
£81.00 - Used for jamming timecode from a generator to Audio Ltd. A10 or Zaxcom
- Suitable as audio input for Sennheiser and Wisycom Transmitters
- Unidirectional Lemo 5-pin to Lemo 3-Pin
- Length: Approx. 40 cm
|
|
£66.00 - The 15.7" Ambient QAT-ECO/Kabel comes with a thin cable for windshield
- The unit features a mono 3-pin XLR connector
- Length: approx. 40 cm
- Weight: 76 g
|
|
£57.00 - Output cable for the Ambient Lockit family
- This is a tool for syncing audio recorders on-the-go
- 5-pin Lemo connector to BNC 90° and is 15.75" (40 cm) long
|
|
£63.00 - ACN-CL Lockit sync output cable for Genlock / Wordclock
- 5-Pin Lemo with Yellow Mark to BNC 90° Male
- Cable is approximately 40cm
|
|
£78.00 - TinyMike Adaptor with 3-pin XLR plug, active cable for 48 Volt Phantom power
- Binder 3-pin to 3-pin XLR male
- Length: Approx. 40 cm
- XLR cap: Red
|
|
£48.00 - A wide selection of UMP-OUT cables
- Cables range from TA3F to 5 different output variations
- All cables are approximately 16cm in length
- Featuring integrated capacitors to suppress HF interferences
|
|
£39.00 - Microphone input cable for UMP II
- TA4F to Neutrik 3-pin XLR female connector EMC
- Length: 32 cm
|
|
£297.60 - Audio Ltd A-XLR stand-alone cable assembly adapter,
- XLR3M for audio & HRS 4p for DC, for use with A10-RX
- XLR and power cable adapter to convert the A10-RX-SL to A10-RX-XLR
- 2 x XLR3M for audio output. 1 x HRS for DC input + 1x HRS for DC feedthrough
|
|
£48.00 - 24"/60cm Straight power cable
- 4-pin Hirose male connector on both ends
- 20AWG 2 conductors black cable (PVC insulation and jacket)
- Select connector from drop down
|
|
£15.00 - Current Output: 5V 3A
- Supports max-speed 3A fast charging for any USB-C Device
- User-friendly design helps you plug and unplug easily
- Sturdy construction has connectors with molded strain relief
|
|
£8.00 - 3.5mm Male Connector to 3.5mm Female Connector
- Cable available for Smartphones or Cameras
- Straight to Straight Connectors
- Cable length 15cm
|
|
£30.00 - Solid Metal Body Construction
- Rugged Plastic Belt Clip
- Adapts 48v to 3v PIP (Plug In Power)
- Works with standard 3.5mm microphones
|
|
£30.00 - High quality genuine DPA product
- 1.6 mm diameter MicroDot connector
- 1.8 m (5.9 ft) in Length
- Available in black
|
|
£65.00 - Hirose to USB iPhone/iPad Charge Adapter - 5v Regulated - 15cm
- Ideal as a charge adapter for iPhones/iPads
- 5v Regulated. 15cm cable length
- Hirose 4 pin Male. 2A
|
|
£52.00 - For powering two devices from a single Hirose
- Hirose 4 pin (Male)
- Dual Hirose 4 pin (Female) In-line
- 8cm Length
|
|
£38.40 - Ideal for powering accessories which require a 2.1mm DC Barrel Plug
- 45cm Length
- Hirose 4 pin (Male)
- 2.1mm DC Jack Centre Positive
|
|
£38.40 - 45cm Length
- Hirose 4 pin (Male)
- DC Jack 2.5mm Centre positive
- Blackmagic cinema/4k compatible (Not for BM Pocket use)
|
|
£6.00 - Various Lengths: 1m, 3m, 10m
- High Speed 4K UHD HDMI Lead with Ethernet
- HDMI Connection Male to Male
- Durable PVC Jacket and Connectors
|
|
£84.00 - Cable kit for K202 boom pole
- Also requires a KCC, KCCR or KTA2 to work
- Pigtailed connection to TA3F
- Includes XLR connector that needs to be soldered
|
|
£54.00 - Electronically balanced variable high level output, Hirose to XLR male connector
- Audio balanced high level output cable 0.7 metres long
- Hirose to XLR male connector
- For Explorer SDR only
|
|
£95.00 - Audio balanced high level output cable with RX powering
- Hirose female to XLR male and Hirose male connector
- In-line regulator 9v to 16v input
- For Explorer Series SDR only
|
|
£180.00 - Double Audio high level output cable with RX powering
- Hirose females to XLR males and Hirose male connector
- In-line regulator 9v to 16v input
- For Two Explorer Series SDRs only
|
|
£65.00 - Clip on line input cable
- Length - 100cm (1M)
- XLR connector
|
-for-Sound-Devices-1-2.jpg)
-for-Sound-Devices_1.jpg)
-to-2x-In-line-Hirose-(Female)-2.jpg)
