£16.50 - High quality Pinknoise Custom cable
- Made with Rean TA3 female plug to Neutrik XLR 3 pin male plug
- Standard length is 40cm
- These cables are colour coded for your convenience
|
|
£16.50 - High quality Pinknoise Custom cable
- Made with Rean TA3 female plug to Neutrik XLR 3 pin female plug
- Standard length is 40cm
- These cables are colour coded for your convenience
|
|
£26.40 - 9 Volt battery box
- 2.5mm right angled locking DC power plug
- Same connector as used on the Lectrosonics SRA Radio Mic Receiver
- Features on/off feature on the battery box
|
|
£36.00 - 5 Different connectors available
- Easy to use and swap out Micon system
- Made by Active Audio / Da Cappo
|
|
£84.00 - Meta data interface cable for RED cameras
- For connecting Lockit Synchronizer to Red Epic camera via RCP protocol
- 5-pin Lemo to 4-pin Lemo
- Length approx. 40 cm
|
|
£54.00 - USB cable for the Ambient Tiny Lockit
- Data transfer cable
- Featuring a USB A type to a 5-Pin Lemo
- Length: Approx. 100cm
|
|
£120.00 - QXS range up to QXS5100 can be fitted with an internal coiled cable
- Screw-on boom pole end piece with embedded mono XLR Connection
- With straight outlet for ENG & documentary boom poles
- Length of 75 up to 300 cm for Ambient Quickpole QXS580
|
|
£39.00 - Adaptor cable for iPod touch®, iPhone® & iPad®
- Timecode input cable for Ambient Lockit products to Apple mobiles
- BNC right angle to 3.5 mm TRRS jack, w/ pad line to mic level
- Length approx. 60 cm
|
|
£63.00 - Adaptor cable for iPhone5® & iPad mini®
- Timecode input cable for Ambient Lockit to mobile Apple products
- Lemo 0B 5-pin to 3.5 mm TRRS jack, w/ pad line to mic level
|
|
£78.00 - Used for jamming timecode from a generator to Audio Ltd. A10 or Zaxcom
- Suitable as audio input for Sennheiser and Wisycom Transmitters
- Unidirectional Lemo 5-pin to Lemo 3-Pin
- Length: Approx. 40 cm
|
|
£84.00 - Ambient LTC-OUT/EPIC Timecode Output Cable
- Lockit Timecode output cable to Red Epic / Scarlet
- Features a Lemo Series 0B 5-pin to Lemo Series 00 4-pin
- Length: Approx 40cm
|
|
£75.00 - Timecode output cable with 5-pin Lemo to 3.5mm TRS right angle plug
- Plus jack for feeding microphone and timecode into DSLR
- Microphone cable to left channel, timecode cable to right channel
- Features a 20dB pad
|
|
£63.00 - The 15.7" Ambient QAT-ECO/Kabel comes with a thin cable for windshield
- The unit features a mono 3-pin XLR connector
- Length: approx. 40 cm
- Weight: 76 g
|
|
£54.00 - Output cable for the Ambient Lockit family
- This is a tool for syncing audio recorders on-the-go
- 5-pin Lemo connector to BNC 90° and is 15.75" (40 cm) long
|
|
£63.00 - ACN-CL Lockit sync output cable for Genlock / Wordclock
- 5-Pin Lemo with Yellow Mark to BNC 90° Male
- Cable is approximately 40cm
|
|
£69.00 - The timecode signal unidirectional, flows one way only
- 5-pin Lemo to 5-pin Lemo
- Length: Approx. 60 cm
|
|
£66.00 - Features high quality cable and connectors
- Designed specifically for timecode input
- Features a 3-Pin XLR Female to 5-Pin Lemo connector
|
|
£96.00 - Bi-Directional. LTC In/Out, Ascii In/Out, tune ref. Lemo to Lemo
- 5-pin Lemo to 5-pin Lemo. Coiled cable
- Length: Approx. 50 cm
- Colour: Black
|
|
£48.00 - A wide selection of UMP-OUT cables
- Cables range from TA3F to 5 different output variations
- All cables are approximately 16cm in length
- Featuring integrated capacitors to suppress HF interferences
|
|
£108.00 - Balanced 3-Pin XLR Female to 3-Pin Lemo cable
- Designed to be used with the Audio Ltd radio mic systems
- Includes a pre-installed A-Filter which reduces RF interference by ~40db
- Added strain relief compared to the AC-BALXLR-2
|
|
£297.60 - Audio Ltd A-XLR stand-alone cable assembly adapter,
- XLR3M for audio & HRS 4p for DC, for use with A10-RX
- XLR and power cable adapter to convert the A10-RX-SL to A10-RX-XLR
- 2 x XLR3M for audio output. 1 x HRS for DC input + 1x HRS for DC feedthrough
|
|
£120.00 - Double audio output & external powering cable to power two AWDR-1(HR4) receivers
- 2 x 4-pin Hirose (HR4) balanced high level and external powering (10-18Vdc)
- With 4-pin Hirose, output to 2 x XLRs
- Length: 0.8 m
|
|
£144.00 - External powering with in-line voltage regulator and dc filtering
- To Line Feed Into Two Transmitters with External Powering Facility
- 2 XLR type female connectors w/ 2 TFA-5 connectors & 4-pin Hirose dc connector
- Cable Length: 0.8m
|
|
£384.00 - Delivers a true 48V from one AA battery
- Uses high quality input transformer
- Integrated ON/OFF switch with Low Battery LED Indicator
- Robust, light-weight, aluminium, machined tube with integrated battery compartment
|
|
£45.00 - 24"/60cm Straight power cable
- 4-pin Hirose male connector on both ends
- 20AWG 2 conductors black cable (PVC insulation and jacket)
- Select connector from drop down
|
|
£15.00 - Current Output: 5V 3A
- Supports max-speed 3A fast charging for any USB-C Device
- User-friendly design helps you plug and unplug easily
- Sturdy construction has connectors with molded strain relief
|
|
£8.00 - 3.5mm Male Connector to 3.5mm Female Connector
- Cable available for Smartphones or Cameras
- Straight to Straight Connectors
- Cable length 15cm
|
|
£8.00 - 3.5mm Male Connector to 3.5mm Male Connector
- Cable Available for Smartphones
- Cable Available for Cameras
- Cable Length 15cm
|
|
£30.00 - High quality genuine DPA product
- 1.6 mm diameter MicroDot connector
- 1.8 m (5.9 ft) in Length
- Available in black
|
|
£65.00 - Hirose to USB iPhone/iPad Charge Adaptor - 5v Regulated - 15cm
- Ideal as a charge adaptor for iPhones/iPads
- 5v Regulated. 15cm cable length
- Hirose 4 pin Male. 2A
|
-for-Sound-Devices-1-2.jpg)
-for-Sound-Devices_1.jpg)
