£27.00 - Utilizes a helical element to greatly reduce the physical length of the antenna
- Ultra-compact, aesthetically pleasing antenna in a right angle form factor
- Ruggedly constructed, able to withstand punishing environments
- The 2.45 GHz version attached with a standard SMA connector
|
|
£42.00 - An ideal product to carry your LPDA antenna
- Padded to provide the necessary protection for your antenna
- Includes carrying handle and zipped internal compartments for loose items
- Designed to carry up to two AW-LPDA series antennas
|
|
£810.00 - Digitally tuned filtering
- Very high dynamic range RF amplifier
- Tuning range 470-718MHz
- User adjustable tuning in 8MHz steps
|
|
£384.00 - LPDA-DIV, Log Periodic Dipole Array antenna for Diversity reception
- Two independent antennas in opposite polarisation
- LPDA-P section: SWR<1.5 over 470-870MHz, Gain 5dB over dipole antenna
- Dipole section: SWR<2.0 over 470-750MHz, 3dB gain compared to ¼ wave whip antenna
|
|
£249.00 - Log Periodic Dipole Array Antenna (470-870MHz)
- Passive gain of +5dB referenced to dipole
- +8dB referenced to mono-pole whip antenna
- Suitable for Receive or transmit applications
|
|
£459.00 - Compact, wideband UHF, active receiver antenna
- Ultra low noise onboard amplifier with gain from - 9 dB to + 18 dB
- High efficient input filters for removing unwanted RF spectrum
- Rock solid mechanical construction guarantees functionality both indoor and outdoor
|
|
£918.00 - Includes: 2 x Betso Sharkie Antenna & 1x Betso Pouch
- Compact, wideband UHF, active receiver antenna
- Nylon pouch protects the Antenna from rain, dust and unwanted damage
- High quality custom BNC cables are available extras
|
|
£36.00 - The Nylon pouch protects SHARKIE from rain, dust and unwanted damage
- Great for protection from accidental scratches etc. during transportation
- The pouch is designed to accept one or two Sharkie antennas due to its soft inside divider
|
|
£219.00 - Allows an antenna mount to be affixed to a boom pole or c-stand
- This mounting bracket has a a long cold shoe that holds a shoe mount
- Allows for mounting right on the bracket
- Also comes with two mounting rings that are moveable along the tube
|
|
£225.00 - Allows an antenna mount to be affixed to a boom pole or c-stand
- This mounting bracket has a a long cold shoe that holds a shoe mount
- Allows for mounting right on the bracket
- Also comes with two mounting rings that are moveable along the tube
|
|
£42.00 - Zippered flat envelope-style sleeve designed to keep shark fin style antennas safe
- Measures 15” x 14.5” (38cm x 37cm) at its longest and widest points
- The versatile design fits sharkfin antennas from Betso, Lectrosonics, PSC,
- Sennheiser, Wisycom and Zaxcom among others.
|
|
£42.00 - This replacement or spare ring is made for the K-Tek shark antenna mount systems
- It's compatible with both "T" and "L" mount versions
- Allows the antenna mount to be affixed to a boom pole or c-stand
|
|
£288.00 - Fibreglass circuit board material and are extremely rugged
- Built-in amplifier with adjustable gain
- Can be mounted horizontally or vertically
- Frequency Range 450-862 MHz
|
|
£360.00 - Fibreglass circuit board material and are extremely rugged
- Built-in amplifier with adjustable gain
- Can be mounted horizontally or vertically
- Frequency Range 450-862 MHz
|
|
£759.00 - Fibreglass circuit board material and are extremely rugged
- Built-in amplifier with adjustable gain
- Can be mounted horizontally or vertically
- Select the Frequency from the drop down menu below
|
|
£42.00 - Whip antenna for UM belt packs
- Also works for SM series and new SR Receivers
- Standard SMA connector
- See data sheet for cutting template
|
|
£54.00 - Made to carry a Lectrosonics ALP series "Shark-Fin" antenna.
- Compatible with Lectrosonics ALP500, ALP620 or ALP650 "Shark Fin" antenna.
- Zippered Cordura nylon case.
- interior Dimensions: 13.5 x 12.25 x 10.75" (34.29 x 31.12 x 27.31cm)
|
|
£30.00 - Miracle Whip antennas are made of memory steel
- Recommended for Lectrosonics or any other UHF Receiver or Transmitter
- Great for replacing old or broken antennas
- See available connectors below
|
|
£459.00 - This lightweight, miniaturized antenna is built for maximum gain in the 2.4 GHz band
- Provides significant performance improvements over other 2.4 GHz directional antennas
- With 12 dBd of gain, it significantly increases useable range, indoors or out
- The circularly polarized element also reduces signal dropouts and improves link quality
|
|
£597.00 - Frequency Range 470 - 698 MHz, + 950 MHz
- Designed for in-ear monitor (IEM) systems and long range wireless mic applications
- Folds from 12'' Extended to 3'' collapsed, 14'' L x 14'' W
- Custom Colors and Logo Printing Available
|
|
£435.00 - Passive wideband 470-698Mhz UHF design
- Portable and simple to operate
- Reduces microphone drop-outs and interference
- Excels in tough RF environments
|
|
£930.00 - Takes the complexity out of multi-zone wireless microphone projects
- Combines together up to four separate pairs of diversity antenna connections
- indoor-outdoor configurations, or main stages with secondary breakout rooms
- For fine tuning RF levels
|
|
£129.00 - Passive omni-directional antenna
- 450 - 960 MHz frequencies
- Connector: BNC
- 3/8" Thread for mic stand
|
|
£229.00 - Passive directional antenna
- 450 - 960 MHz frequencies
- Connector: BNC
- 3/8" Thread for mic stand
|
|
£24.00 - Antenna for the MPR30 Band M (566-798MHz)
- Comes with black cap and 590 label
- SMA connector
- Perfect replacment for missing or broken antenna
|
|
£195.00 - Wideband working bandwidth of 450-870 MHz
- Sturdy metal body construction and epoxy protection on cable joints
- Optimized 6dB gain with a typical beam-width of 90 degrees
- Includes Pouch and N Type Adapter for FREE!
|
-1.jpg)
_1.jpg)
