£54.00 - Secure your boom with padded & wide holding points
- Wide cradles to securely hold boom. Padded cradles to protect boom
- Strong & compact design. Anodized Aluminium Main Body
- Features a Stainless Steel Pin
|
|
£12.00 - Replacement yellow cap for the Ambient BC series boom pole cases
- Fits all BC series cases
|
|
£114.00 - QXS range up to QXS5100 can be fitted with an internal coiled cable
- Screw-on boom pole end piece with embedded mono XLR Connection
- With straight outlet for ENG & documentary boom poles
- Length of 75 up to 300 cm for Ambient Quickpole QXS580
|
|
£24.00 - XLR / plug-on transmitter mount for boompoles
- Boom cable interlock. Swift unplugging of boom cable
- Ideal plug-on transmitter positioning
- Reduces handling noise
|
|
£57.00 - Features a thin cable, designed for use with a boom pole or windshield
- Has a mono 3-Pin Right-Angled XLR connector with an XLR-Tip (QAT-ECO)
- Length: approx. 40 cm
- Weight: 76 g
|
|
£66.00 - The 15.7" Ambient QAT-ECO/Kabel comes with a thin cable for windshield
- The unit features a mono 3-pin XLR connector
- Length: approx. 40 cm
- Weight: 76 g
|
|
£207.00 - Ability to boom over the head of a cameraman or round corners
- The toothed flange can be set to any angle and once locked will not turn
- Can be folded back on the boom or removed when not required
- Ideal completion for a completely rigid but quickly removable joint
|
|
£45.00 - Replace the Rycote Boom Adaptor on Rycote Windshield Kits
- 3/8" female thread
- Robust & Sturdy
- Plastic shim prevents scratches
|
|
£27.00 - Extra 3/8" threaded tip for the Ambient QRT Quicklock
- Provides a snap-on / snap-off microphone assembly mounting onto boom poles
- Joined in a twist-lock motion for easy connection and release
- Designed to fit any 3/8" thread as encountered on all microphone booms
|
|
£120.00 - Snap connection noise-free enough to allow for professional boom action
- Mounts to the 3/8” thread of a boom or stand, secured in place via a grub screw
- Fits into the mic support and can be tightened securely through a cross hole
- Tapered design provides a rigid, rattle free joint, has a self locking, self locating action
|
|
£123.00 - The Twister (QUM) is a knuckle joint with two axes of rotation
- Allowing the mic assembly to be adjusted horizontally independent of the boom angle
- This is essential with the use of stereo or surround microphones
- Used to maintain a correct perspective reproduction
|
|
£120.00 - Boom Mount for Phantom Power Unit and Wireless transmitters.
- Carbon fibre tube is lightweight but very sturdy at the same time.
- Velcro Straps and soft pads provide quick, easy and save mounting
- Compatible with any common belt-pack TX and the UMP II mic supply.
|
|
£51.00 - Material: Waterproofed fabric
- Vision Panel: 1.77 x 1.77" (45 x 45 mm)
- Height: 9.44" (240 mm)
- Width: 5.51" (140 mm)
|
|
£24.00 - Lets you fix your plug-on transmitter
- Or attach the XLR plug of your internal cable at the bottom side of your boompole
- The clamp is made of POM
- Diameter: 34mm to 35mm. Weight: 40g
|
|
£240.00 - Provides an additional 4.43 feet (1.35m) for the QP4140 boom pole
- Has the added advantage that it can be extended like the other segments
- The rubber foot is removed, revealing the nylon felt spacer
- The extension is fitted like an extra segment, and can be left on the boom
|
|
£39.00 - Soft grip shrink tube for better grip
- 1 meter length
- Designed specifically for Ambient Boom Poles
- Diameter of 35mm to fit every ambient boom pole
|
|
£63.00 - Enables static boom operation without re-rigging microphone or cables
- The boom is held in the cradle with no clamping mechanism to cause damage
- Takes only seconds to mount a microphone boom into the Boom-Buddy
- The fabric bag can be used to add counter balance weights if required
|
|
£21.00 - Solid hook, made from strong ABS
- Rest your boompole in-between takes
- Comes with a quick link for use with vertical straps
- & self adhesive felt which can be applied when desired
|
|
£84.00 - The K-Tek Base Unit is for use with internally coiled XLR cables
- A replacement Output base for boom poles without bottom mounted XLR
- Provides a bottom mounting XLR Male instead of the standard Mushroom base
- This unit is designed to modify boom poles that are not factory pre-wired.
|
|
£39.00 - Rounded base made especially for the K-Tek Klassic range of boom poles
- Longer takes make the mushroom base great when set on the ground
- Comes in handy when doing 2-person interviews.
|
|
£57.00 - 45cm (1.5') Coiled microphone cable that extends to 274cm (9')
- 3-Pin Neutrik Male XLR
- 3-Pin Neutrik Female Right-Angle XLR
- For use with Boompoles
|
|
£57.00 - 45cm (1.5') Coiled microphone cable that extends to 274cm (9')
- 3-Pin Neutrik Male XLR
- 3-Pin Neutrik Female XLR
- For use with Boompoles
|
|
£24.00 - Easily attaches to bags, belts, pockets and straps
- Holds on to various gear thanks with its velcro-like arms and swivel belt clip
- A great boom holder, that quickly turns into a headphone or cable holder
- A great companion for every Stingray Audio Bag and the Stingray Harness
|
|
£24.00 - Boomshine originally formulated by K-Tek founder and innovator, Manfred Klemme
- All new Boom Poles that leave the K-Tek factory are cleaned with Boom Shine
- The Kit contains a 4 oz. Bottle of Boomshine and two Microfiber cloths
|
|
£99.00 - A 1.7lbs (770g) counter weight to reduce booming fatigue
- Attaches to the bottom of any Klassic boom pole before the rubber element
- Product Length: 3.3" (85mm)
- Product Weight: 1.7 lbs (770g)
|
|
£45.00 - Convenient Boom Holder Cup for storing and holding boompoles
- Fast & easy to use. Attaches to MOLLE straps
- Can be screwed into or adhered to carts and gear storage
- Perfect for use with Stingray Backpack or Stingray Mixer bags
|
|
£27.00 - An innovative multi-purpose mounting solution
- Used to mount a transmitter, monitor, mobile device or remotes
- Mounts to boom poles, tripods, handgrips or other tube shaped objects
- Made of strong elastic silicone and lightweight, (21g / 0.74oz
|
|
£90.00 - Includes Bottom (KW552)
- Quick Release XLR System for Boompoles
- Attaches to 3/8" x 16 Threaded Stud
- Works with Stud Terminated Poles
|
|
£115.00 - The KTA2 Transmitter Adapter Side Mount from K-Tek
- Machined aluminum side mount XLR connector
- Designed to fit any of the K-Tek Klassic poles
|
|
£114.00 - Male 3-pin XLR Side Exit and Rubber bottom
- Attaches to the bottom of any Klassic boom pole
- Used with plug on wireless transmitters
|
-1.jpg)
-4.jpg)
-1.jpg)
