£108.00 - Balanced 3-Pin XLR Female to 3-Pin Lemo cable
- Designed to be used with the Audio Ltd radio mic systems
- Includes a pre-installed A-Filter which reduces RF interference by ~40db
- Added strain relief compared to the AC-BALXLR-2
|
|
£78.00 - Accessory plate designed for mounting the A10-TX
- Mounts onto microphone boom poles with 3/8" thread top screw
|
|
£24.00 - Audio Ltd A-CASE Neoprene Case for A10-TX
- Neoprene transmitter case specifically designed for the A10-TX
- Features an elastic strap to secure the transmitter in the pouch
|
|
£22.80 - Replacement Belt Clip for A10-TX Transmitter
- To replace lost or damaged A-CLIP included with the Audio Ltd A10-TX
|
|
£276.00 - Heavy-duty 3.5 mm headphone jack
- Rugged, spring steel belt clip
- User-friendly headphone volume control/power switch
- Monitor channel 1, channel 2 or a stereo mix of both channels
|
|
£326.40 - Audio Ltd 25 Pin D-Type Uni/Superslot adapter
- Designed for the A10-RX
- Includes mounting plate
|
|
£24.00 - Wireless Straight SMA Antenna
- Straight black antenna with nickle plated SMA connector
- Designed for the A10 Receiver and Transmitter
|
|
£27.00 - Wireless Straight SMA Antenna
- Straight black antenna with nickle plated SMA connector
- Designed for the A10 Receiver and Transmitter
|
|
£297.60 - Audio Ltd A-XLR stand-alone cable assembly adapter,
- XLR3M for audio & HRS 4p for DC, for use with A10-RX
- XLR and power cable adapter to convert the A10-RX-SL to A10-RX-XLR
- 2 x XLR3M for audio output. 1 x HRS for DC input + 1x HRS for DC feedthrough
|
|
£4,920.00 - Super wideband UHF receiver tuning - over 224 MHz (470 MHz–694 MHz)
- Built-in audio recorder and high-precision timecode generator in the A10-TX transmitter
- Records timecode-stamped files to removable microSD cards
- Fully balanced, broadcast quality mic preamp with analogue limiter
|
|
£1,794.00 - Accepts up to four, two-channel wireless receivers
- Audio output on analogue/AES3 and Dante
- Built-in power distribution & antenna distribution
- Compatible with select Audio Ltd, Lectrosonics & Wisycom
|
|
£2,574.00 - Super wideband UHF receiver tuning - over 224 MHz (470 MHz–694 MHz)
- Built-in audio recorder and high-precision timecode generator in the A10-TX transmitter
- Records timecode-stamped files to removable microSD cards
- Fully balanced, broadcast quality mic preamp with analogue limiter
|
|
£1,434.00 - Low-noise, studio-grade balanced input for microphones and line level inputs
- Integrated digital audio recorder with ultra-accurate timecode generator
- Records to removable microSD cards
- Simultaneous wireless transmission and recording
|
|
£720.00 - 200 MHz bandwidth: 500 - 700 MHz operating range
- Compatible with UHF Wireless. 4 x SMA outputs per side
- Built-in Active RF distribution, each SMA yeilds 2-3 dB gain
- Powered by External 12-18V DC via Hirose 4
|
|
£78.00 - Balanced 3-Pin XLR Female to 3-Pin Lemo cable
- Designed to be used with the Audio Ltd radio mic systems
- Includes a pre-installed A-Filter which reduces RF interference by ~40db
- High quality Pinknoise custom cable
|
|
£72.00 - Pinknoise Custom 5-pin Lemo to 3-pin Lemo
- Timecode IN Cable for Audio Ltd A10-TX
- High quality Pinknoise custom timecode cable
- 5-PIN LEMO to 3-PIN LEMO Timecode cable, 40.6 cm
|
|
£54.00 - Pinknoise Custom BNC to 3-Pin Lemo Timecode IN Cable
- Designed for the Audio Ltd. A10-TX
- Timecode cable, BNC to LEMO 3-pin
- To connect external timecode sources to the A10-TX
|
