£1,296.00 - Elliptic geometry adapted for spaced microphone (time difference)
- Suspended cage (patented) for improved handling noise attenuation
- Use of two MINIX 8000 suspensions, fixed on a rail for MKH 8040 / 8050
- Perfect for stereophonic sets like ORTF, XY or any kind of angle/distance combination
|
|
£1,368.00 - Elliptic geometry adapted for spaced microphone (time difference)
- Suspended cage (patented) for improved handling noise attenuation
- Use of three MINIX CCM suspensions, fixed on a rail
- Perfect for stereophonic sets like ORTF, XY or any kind of angle/distance combination
|
|
£1,554.00 - Elliptic geometry adapted for spaced microphone (time difference)
- Suspended cage (patented) for improved handling noise attenuation
- Use of three MINIX 8000 suspensions, fixed on a rail
- Perfect for stereophonic sets like ORTF, XY or any kind of angle/distance combination
|
|
£1,188.00 - Elliptic geometry adapted for spaced microphone (time difference).
- Suspended cage (patented) for improved handling noise attenuation.
- Use of two MINIX CCM suspensions, fixed on a rail
- Perfect for stereophonic sets like ORTF, XY or any kind of angle/distance combination
|
|
£1,188.00 - The central "T" rod is ended by a very short shielded XLR.
- This version doesn't allow the installation of a central microphone.
- Isolators: 2 x D4
- Two axis swivel (Zephyx type) with single knob.
|
|
£20.40 - Hot Shoe Camera Adapter for COSI Windshields
- Hot shoe mount adapter with adjustment knob
- For mounting the Cosi windshield kit onto most DSLR cameras
|
|
£33.00 - COSI internal mic holders are interchangable
- The holder slides into the rear of the COSI and turn to lock into place
- Available microphone holder diameters, 19mm, 20mm, 21mm & 22mm
|
|
£498.00 - In-built suspension and windshield combo
- Designed for indoor / outdoor use, straight out the box!
- Lightweight suspension suitable for mics with a 19mm diameter
- Compatible with: DPA 4017C, Schoeps CMC Series & MiniCMIT
|
|
£498.00 - In-built suspension and windshield combo
- Designed for indoor / outdoor use, straight out the box!
- Lightweight suspension suitable for mics with a 19mm diameter
- Compatible with: Sanken CS-M1
|
|
£498.00 - In-built suspension and windshield combo
- Designed for indoor / outdoor use, straight out the box!
- Lightweight suspension suitable for mics with a 19mm diameter
- Compatible with: Sennhesier MKH8000, DPA 4018C
|
|
£159.00 - Wind protection ball (10cm diameter). Main fabric for indoor use
- Available in 4 models: 20mm, 22mm, 25mm and 20mm MS
- Optional fur for high wind situations
- Cinela ultimate precision and high quality
|
|
£297.00 - Indoor suspension fitted with a single isolator for maximum efficiency and minimum size
- Inserted in a cradle, the Original Sennheiser connector allows direct to the MKH8000
- The signal is sent to the standard XLR fixed to the standard Osix base swivel
- It is necessary to provide a filtering (50-80Hz, +12 or better +18 dB/oct)
|
|
£222.00 - Designed specifically for the Schoeps CCM compact microphone series
- Indoor suspension fitted with a single isolator for maximum efficiency and minimum size
- Inserted in a cradle, the Lemo connector allows direct screw of the CCM
- The signal is sent to the XLR fixed to the standard Osix base swivel
|
|
£222.00 - Designed specifically for the Schoeps CCM compact microphone series
- Indoor suspension fitted with a single isolator for maximum efficiency and minimum size
- Inserted in a cradle, the Lemo connector allows direct screw of the CCM
- The signal is sent to the XLR fixed to the standard Osix base swivel
|
|
£267.00 - An optimal compromise between vibration isolation and firmness of the mic mounting
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£267.00 - Compatible with Neumann KMR 81, Sennheiser MKH 416, AKG SE 300 B
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£267.00 - Compatible with Sennheiser MKH 20, MKH 30, MKH 40, MKH 50
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£336.00 - Compatible with Sennheiser MKH418 & Sennheiser MKH418 S
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£267.00 - Compatible with Sennheiser MKH 60, Schoeps CMC + CUT1, Schoeps CMIT 5U
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£267.00 - For Schoeps CMIT 5U, CMC + CUT1, Sennheiser K6 + ME 62, K6 + ME 64 & Sanken CS-3e
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£366.00 - This product is an adaptation of the Schoeps bar STCg for ORTF with CCM microphones
- The body of the microphone is simply screwed to the Lemo plugs
- The two axis swivel (Zephyx type) provides full orientation of the head
- The cable 2 x Lemo + XLR5M is a full part of the suspension
|
|
£867.00 - The Reference PIA-1 is composed of the cage with single axis swivel and light XLR extension
- The main fabric, a suspension of your choice and a fur (PIA-FUR-SP or PIA-FUR-LP)
- Regarding lightness and efficiency, it is not simply possible to upgrade a PIA-1 to PIA-2 or PIA-3
|
|
£990.00 - MS version of the Cinela PIA-1 windshield
- Highly adapted to the MS Schoeps CMIT + CCM8 and other microphones
- The Figure of 8 microphone is connected with a detachable cord
- PIA-2S: Standard swivel, perfect for mono, PIA-2D: Double axis swivel, perfect for stereo
|
|
£1,098.00 - Double MS version of the PIA-1 windshield
- Highly adapted to the DMS Schoeps CMIT + CCM8 + CCM4 and other microphones
- The CCM8 and CCM4 microphones are connected with detachable cords
- PIA-3S: Standard swivel, perfect for mono, PIA-3D: Double axis swivel, perfect for stereo/DMS
|
|
£198.00 - Fully surrounding. Thick layer (3 cm) of large open cell light foam.
- Very quick fitting. Velcro fastening.
- Supplied with Nikwax spray to waterproof the regular fabric cover
- Very good wind protection in rainy conditions.
|
|
£1,128.00 - Specific PIANO adaptation for the Neuman RSM191.
- DIN plug 7 pins (mic side) and XLR7M (swivel side).
- Very thin and flexible cable.
- Only requires a XLR7 extension to go to the power supply.
|
|
£1,799.00 - Ex-Demo Bundle. 10/10 Condition.
- Cinela PIANI-1 Pianissimo Windshield w/ XLR 3-Pin
- DPA 4017B Shotgun Microphone
- Cinela PIANI Long Pile Fur
|
|
£768.00 - Main cage and swivel two axis with a polycarbonate shell
- Mono Suspension Module with elliptical isolators (MOD-E-OSIX): mike reference to be precised
- Binder holder (2 detachable plugs). 3D Primary fabric
- Fur: to be precised (FUR-LP: long piles; FUR-SP: short piles)
|
|
£924.00 - Main cage and swivel two axis with a polycarbonate shell
- Mono Suspension Module with elliptical isolators (MOD-E-OSIX): mike reference to be precised
- Binder holder (2 detachable plugs). 3D Primary fabric
- Fur: to be precised (FUR-LP: long piles; FUR-SP: short piles)
|
|
£168.00- Pinknoise Systems stock only the very best branded audio equipment in the business
- Hundreds of products at great prices across a massive range of audio categories
- Order before 4.00pm, Monday to Thursday, for next day delivery (UK only)
- We also ship across Europe and worldwide at competitive prices
|
-19mm.jpg)
-1.jpg)
-1.jpg)
-1.jpg)
-2.jpg)
-1.jpg)
-1.jpg)
