£288.00 - Fibreglass circuit board material and are extremely rugged
- Built-in amplifier with adjustable gain
- Can be mounted horizontally or vertically
- Frequency Range 450-862 MHz
|
|
£360.00 - Fibreglass circuit board material and are extremely rugged
- Built-in amplifier with adjustable gain
- Can be mounted horizontally or vertically
- Frequency Range 450-862 MHz
|
|
£759.00 - Fibreglass circuit board material and are extremely rugged
- Built-in amplifier with adjustable gain
- Can be mounted horizontally or vertically
- Select the Frequency from the drop down menu below
|
|
£42.00 - Whip antenna for UM belt packs
- Also works for SM series and new SR Receivers
- Standard SMA connector
- See data sheet for cutting template
|
|
£156.00 - Back plate adaptors for Lectrosonics SRB/E01
- Select from three models (more details below)
- Units come with screws
- Please select model below
|
|
£168.00 - Designed to equip your LR Receiver with a battery eliminator
- Featuring the LRBATELIM for LR Receivers
- Includes a Sound Guys Solutions Locking DC connector to Hirose
|
|
£1,596.00 - Tunes across entire UHF frequency range
- 256-bit encryption - AES 256-CTR
- Selectable RF power at 25 and 50 mW
- Operating frequencies are 470.100 - 607.950 MHz
|
|
£1,698.00 - Tunes across entire UHF frequency range
- 256-bit encryption - AES 256-CTR
- Selectable RF power at 10, 25 and 50 mW
- AES and analog mic and line level inputs
|
|
£2,997.00 - Includes: Lectrosonics DCHT Digital Camera Hop Transmitter
- Lectrosonics M2R IEM/IFB Receiver
- 45cm TA6F to Twin 3-Pin XLR-F or TA6F to Twin TA3F
- 45cm 3.5mm Stereo (Non-Locking) to Twin 3-Pin XLR-M
|
|
£1,596.00 - Second generation digital design
- 256-bit encryption - AES 256-CTR
- Interchangeable thread-on capsules
- Frequency range is 470.100 - 607.950 MHz
|
|
£4,998.00 - Four-channel, half-rack design
- Continuously tunable tracking filters covering 470.100 - 614.375 MHz
- Compatible with DSW, Duet and Digital Hybrid Wireless® transmitters
- Built-in wideband antenna multicoupler with loop-thru for additional receivers
|
|
£10,998.00 - Four-channel, half-rack design paired with 4 x bodypack transmitters
- Operating frequencies are within 470.100 - 607.950 MHz
- Compatible with DSW, Duet and Digital Hybrid Wireless® transmitters
- Built-in wideband antenna multicoupler with loop-thru for additional receivers
£15,270.00_value £10,998.00 |
|
£1,245.00 - Accepts microphone or line level signals
- Selectable 5, 15, 48 volt phantom power
- 76 MHz tuning range in 100 kHz or 25 kHz steps for up to 3072 frequencies
- Selectable 25/50 mW output power
|
|
£696.00 - Preset frequency can be set without power or transmitter signal
- Scan mode stores up to five additional frequencies
- Multi-color LED and rotary control for programming and operation
- High sensitivity for extended operating range indoors or outdoors
|
|
£1,338.00 - Digital Hybrid Wireless™ technology
- 256 UHF frequencies in 100kHz steps
- Microprocessor controlled operation. 50 mW power output
- Pilot tone squelch control. Multi-use XLR input jack
|
|
£2,799.00 - LR Compact Wireless Receiver
- LT Portable Beltpack Transmitter
- M152/5P Omni Lavalier Microphone
- TA3F to XLRM Cable
|
|
£1,278.00 - Tunes over a 75 MHz range*
- Tracking front-end filters
- Digital Hybrid Wireless® with compatibility modes for use with earlier transmitters
- Compact size powered by two AA batteries or an optional battery eliminator
|
|
£120.00 - Replaces the batteries and door on the LR receiver
- Allows the unit to be powered from an external DC source
- Supplied in a kit including mounting screws
|
|
£45.00 - Accessory shoe to allowing mounting on DSLR cameras
- Supplied with all the parts needed to mount on a camera or DSLR
- Suitable for the Lectrosonics LR or M2R
|
|
£1,290.00 - Digital Hybrid Wireless® for compandor-free audio
- Selectable 50mW output power
- Compatibility modes for use with analog receivers
- 25 or 100 kHz tuning steps for up to 3072 selectable frequencies
|
|
£198.00 - Omnidirectional Polar Pattern
- TA5 Female Connection
- Wide Frequency Response
- Compatible with any Lectrosonics Beltpack
|
|
£1,089.00 - IEM (Wireless Monitor) receiver with digital RF
- 24-bit digital audio
- IR (infrared) port for fast setup
- High resolution, color LCD
|
|
£2,274.00 - Modular configuration accommodates up to four SRa Series compact receivers
- High performance antenna multicoupler with isolated outputs
- Switchable antenna power for remote coaxial RF amplifiers
- Discrete power distribution with individual protective fusing
|
|
£1,875.00 - Used. 7/10 Condition.
- High performance antenna multicoupler with isolated outputs
- Discrete power distribution with individual protective fusing
- Band 470 - 26 (Low Band: 470 - 691 MHz)
|
|
£54.00 - Made to carry a Lectrosonics ALP series "Shark-Fin" antenna.
- Compatible with Lectrosonics ALP500, ALP620 or ALP650 "Shark Fin" antenna.
- Zippered Cordura nylon case.
- interior Dimensions: 13.5 x 12.25 x 10.75" (34.29 x 31.12 x 27.31cm)
|
|
£768.00 - Professional quality digital audio recordings in Broadcast Wave Format
- Ultra compact size for easy concealment
- Records to micro SD cards (HC) type - Class 10
- Over six hours of operation on a single AAA lithium battery
|
|
£30.00 - Sewn leather pouch with plastic window
- Designed for HM plug-on transmitters
- Features a rotating belt clip and press stud fastener
- With built-in strap to secure the transmitter
|
|
£36.00 - Sewn leather pouch for the IFBR1a Receiver
- Features a rotating belt clip and press stud fastener
- With built-in strap to secure the receiver
|
|
£36.00 - Sewn leather pouch with plastic window
- Designed for the SMDWB dual battery transmitter
- Features a rotating belt clip and press stud fastener
- With built-in strap to secure the transmitter
|
|
£36.00 - Sewn leather pouch with plastic window
- Designed for the SMDWB dual battery transmitter
- Features a rotating belt clip and press stud fastener
- With built-in strap to secure the transmitter
|
