Cinela PIANI-1 Pianissimo Windshield w/ DPA 4017B Shotgun Microphone - Ex-Demo
Cinela PIANI-1 Pianissimo Windshield w/ DPA 4017B Shotgun Microphone - Ex-DemoCinela PIANI-1 Pianissimo Windshield w/ DPA 4017B Shotgun Microphone - Ex-DemoCinela PIANI-1 Pianissimo Windshield w/ DPA 4017B Shotgun Microphone - Ex-DemoCinela PIANI-1 Pianissimo Windshield w/ DPA 4017B Shotgun Microphone - Ex-Demo

Cinela PIANI-1 Pianissimo Windshield w/ DPA 4017B Shotgun Microphone - Ex-Demo

    • Ex-Demo Bundle. 10/10 Condition.
    • Cinela PIANI-1 Pianissimo Windshield w/ XLR 3-Pin
    • DPA 4017B Shotgun Microphone
    • Cinela PIANI Long Pile Fur
  • More Details...

Model:  PNUEQ-BNDL-PIANI-4017
Manufacturer:  Cinela

£2,346.00
£1,750.00
(£1,458.33 Exc. VAT)
+
Apply For Finance

Availability:  

1 in stock, no more available  

1 in stock, no more available

Related Products

Cinela Piani-1 Pianissimo Windshield w/ DPA 4017B Shotgun Microphone - Ex-Demo

  • Ex-Demo Bundle. 10/10 Condition.
  • All units are Ex-Demo. Only been used to test.

Bundle Includes

  • Cinela Piani-1 Pianissimo Windshield
  • DPA 4017B Shotgun Microphone
  • Cinela PIANI Long Pile Fur

Cinela PIANI-1 Pianissimo Windshield - Ex-Demo

The Pianissimo is mainly designed for the new generation of short shotgun microphones and coincident stereo, surround sound combinations and in fact all kind of mics shorter than 21cm. Easily transported, the Pianissimo is very light, robust and adaptable, with all the recognised qualities of the existing range of Cinela windshields.

Very light and unbreakable cage. Constructed in two parts, the lower and upper pieces clip together at six points by simple friction. Aerodynamic ovoid shape and maximum internal volume around microphone acoustic sections for high wind resistance. The primary covering is a 2mm thick 3D fabric to provide a very good first level wind protection for a total acoustic transparency.

Finally, for transport, the Pianissimo comes with an unbreakable transparent shell made from polycarbonate.

Features

  • Main cage and swivel two axis
  • Mono Suspension Module with elliptical isolators (MOD-E-OSIX): mike reference to be precised
  • Binder holder (2 detachable plugs)
  • 3D Primary fabric
  • Polycarbonate shell

DPA 4017B Shotgun Microphone - Ex-Demo

Equipped with a highly directional supercardioid pickup pattern, obtained using a supercardioid design with an interference tube that provides excellent off-axis rejection, the DPA 4017B is a short and exceptionally lightweight shotgun microphone that truly measures up to DPA’s impressive reputation for accuracy, clarity, and musicality.

Designed for a broad range of applications, the phantom powered 4017B is ideal for use with camera systems, in fixed positions at sports facilities, for broadcast/ENG/film booming, and even studio recording environments.

  • Excellent RF Immunity
  • Lightweight
  • Uniform off-axis response
  • Highly directional

Tune out the surroundings

Extensive research and development has been undertaken to optimize the sound coming from the sides and behind the microphone. Minimizing the often very un-linear response of a shotgun microphone due to its side lobes is one of the key accomplishments of the 4017B. The condenser capsule uses a high voltage pre-polarized back plate, endowing the shotgun with high output as well as wide dynamics, extremely low noise and distortion specifications.

Small size, big performance

At just 210 mm (8.3 in) in length and 68 g (2.4 oz) in weight, the aluminum-bodied DPA 4017B is among the smallest and lightest boom microphones available. But that’s not to say that it’s small on performance. Fully immune to RF emission, the 4017B’s 19 mm (0.75 in) condenser cartridge is capable of handling peak SPLs of 152 dB before clipping.

Screwdriver-free filter access

The 4017B features two onboard filters that are activated via an ingenious switching ring design. With the simple twist of two sturdy rings, engineers can implement a high-frequency boost that adds a 4 dB shelf at 8 kHz and a first-order bass roll-off below 120 Hz to minimize handling and wind noise. A permanent third-order high-pass filter at 50 Hz effectively removes unwanted low frequency disturbance from handling and wind noise.


Cinela PIANI Long Pile Fure - Ex-Demo

Long pile fur to use in addition to the Z-COVER fabric.

In comparison to the short pile fur Z-FUR-SH, the efficiency is improved by 4-5 dB in the critical range 20-200Hz with a slight acoustical degradation of 1-2dB of the lowest and highest frequencies.

The main inconvenient is mostly an increase of the volume.

Specifications

DPA 4017B Shotgun Microphone

Directional characteristics: Supercardioid, lobe-shaped
Principle of operation: Pressure gradient, with interference tube
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz, permanent third order high pass filter at 50 Hz
Frequency range, ± 2 dB, at 60 cm: 70 Hz - 18 kHz with typ. 3 dB soft boost at 15 kHz
Sensitivity, nominal ± 2 dB at 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 24 dB (max. 26 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 80 dB(A)
Total Harmonic Distortion (THD): < 1 % up to 133 dB SPL peak
Dynamic range: Typ. 119 dB
Max. SPL, peak before clipping: 138 dB
Filters: High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
Output impedance: < 150 ohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Signal balanced
Common Mode Rejection Ratio (CMRR): > 40 dB
Power supply: 48 V Phantom power (± 4 V)
Current consumption: 4.5 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase
Color: Matte black
Weight: 68 g (2.4 oz)
Microphone diameter: 19 mm (0.75 in)
Capsule diameter: 19 mm (0.75 in)
Microphone length: 212 mm (8.3 in)
Output voltage, RMS: > 1.8 V
Polarity: +V at Pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (14 °F to 113 °F)
Relative Humidity (RH): Up to 90 %

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Product Reviews

Be the first to Write a Review for this item!

× Site Currency