£135.00 - Specially designed rubber base for super easy and secure mounting
- Base windshield made from highly efficient mesh
- Slip-on fur made from Bubblebee industries best imitation fur
- Quick drying of the fur if it gets wet.
|
|
£198.00 - Fully surrounding. Thick layer (3 cm) of large open cell light foam.
- Very quick fitting. Velcro fastening.
- Supplied with Nikwax spray to waterproof the regular fabric cover
- Very good wind protection in rainy conditions.
|
|
£42.00 - slip on foam and fur windjammer
- perfect for microphones with interference tubes up to 9.5cm long
- up to -20dB wind noise reduction when using both foam and fur
- diameters between 19/22mm and 24/25mm
|
|
£18.00 - Slip on foam wind protection
- Perfect for microphones with interference tubes up to 8.5cm long
- Up to -10dB wind noise reduction
- Diameters between 19/22mm and 24/25mm
|
|
£42.00 - Slip on foam and fur windjammer
- Perfect for microphones with interference tubes up to 11.5cm long
- Up to -20dB wind noise reduction when using both foam and fur
- Diameters between 19/22mm and 24/25mm
|
|
£18.00 - Slip on foam wind protection
- Perfect for microphones with interference tubes up to 11.5cm long
- Up to -10dB wind noise reduction
- Diameters between 19/22mm and 24/25mm
|
|
£42.00 - Slip on foam and fur windjammer
- Perfect for microphones with interference tubes up to 14.5cm long
- Up to -20dB wind noise reduction when using both foam and fur
- Diameters between 19/22mm
|
|
£18.00 - Slip on foam
- Perfect for microphones with interference tubes up to 14.5cm long
- Up to -10dB wind noise reduction
- Diameters between 19/22mm
|
|
£42.00 - Slip on foam and fur wind protection
- Perfect for the Sennheiser ME 66
- Up to -20dB wind noise reduction when using both foam and fur
|
|
£42.00 - Slip on foam and fur windjammer
- Perfect for microphones with interference tubes up to 17.5cm long
- Up to -20dB wind noise reduction when using both foam and fur
- Diameters between 19/22mm and 24/25mm
|
|
£18.00 - Slip on foam wind protection
- Perfect for microphones with interference tubes up to 17.5cm long
- Up to -10dB wind noise reduction
- Diameters between 19/22mm and 24/25mm
|
|
£36.00 - Slip on wind protection
- Ideal for mics with slot no further than 5cm
- Up to -20dB wind noise reduction with foam and fur
- Diameters between 19/22mm and 24/25mm
|
|
£7.80 - Slip-on foam windshield
- Designed to protect the microphone head against light wind and pop noise
- Durable open-cell acoustic foam, these windshields offer up to 10 dB wind noise attenuation
- High quality foam provides excellent resistance from damaging effects of moisture and UV light
|
|
£9.60 - Suitable for reporter mics of 40 mm diameter
- Up to 10 dB wind and pop noise attenuation
- With minimal high-frequency loss from this discreet, slip-on windshield
- Excellent resistance to moisture and UV light with the open-cell acoustic foam
|
|
£18.00 - Up to 10dB wind and pop attenuation
- Minumal high-frequency loss from this discreet
- Easily slip-on windshield
- Excellent resistance to moisture
|
|
£9.00 - Ideal for microphones such as Schoeps CCM series
- Deisigned to protect against light wind and pop noise
- Made of durable high quality open-cell acoustic foam
- Can protect up to 20dB wind noise attenuation
|
|
£8.00 - Thin foam covering for a CCM compact microphone or a Colette capsule
- Especially suitable for protecting a capsule from rosin dust
- When attached to a string instrument
|
|
£12.00 - For moderate distances from the person speaking
- Can also be used as a windscreen for pressure transducers
- Negligible effect on sound quality
|
|
£84.00 - The B 55 D is a double version of the B 5 D
- For use on pressure-gradient transducers in light wind and as a close-speech guard
|
|
£42.00 - Protect your microphone from light-wind
- Also works as a close-speech guard
- Only slight influence on the sound
- Made from foam but hollow in the middle
|
_1.jpg)
-or-(2425)-1.jpg)
-or-(2425)-1.jpg)
-or-(2425)-1.jpg)
-or-(2425)-1.jpg)
-or-(2425)-1.jpg)
