Lectrosonics DSR5P Two Channel Digital Slot Receiver with 5-Pin Connector

Lectrosonics DSR5P Two Channel Digital Slot Receiver with 5-Pin Connector

Available Frequencies

Model A1B1: 470.100 - 614.375 MHz (covers blocks 470, 19, 20, 21, 22, 23)
Model B1C1: 537.600 - 691.175 MHz (covers blocks 21, 22, 23, 24, 25, 26)
Model 961: 961.100 - 1014.900 (UK only)

Lectrosonics DSR5P Two Channel Digital Slot Receiver with 5-Pin Connector

Key Features

  • Two independent channels, compact design
  • Vector diversity for superior performance
  • Latest generation of SR Series: Compatible with huge existing ecosystem
  • Compatible with D2, HDM, Duet and DCHX Digital modes and all hybrid modes
  • 24 bit/48 kHz digital for flawless audio
  • AES 256-bit, CTR mode encryption, with 4 different key policies available
  • Analog and AES3 digital audio outputs
  • External DC powering options and USB input for firmware updates and data transfer

The DSR5P digital receiver provide the highest level of RF and audio performance available with a versatile feature set in a compact design for camera mounted applications. Settings can be made from the front panel, making the unit ideal for use in camera hop configurations, in bags and on sound carts. An RF spectrum analyzer and SmartTune are built into the receivers to alleviate interference problems in an increasingly congested RF spectrum.

The mechanical design of the receivers fits into the SuperSlot ecosystem and combines field-proven features developed over many years of experience in motion picture and television production. To decrease weight, the DSR5P provide a two channel receiver in one unit powered by external DC. The receivers are also equipped with an IR port for data transfer between units. The machined aluminum housing and panels are surfaced with a hard-anodized finish with laser etched markings to withstand the rigors of field production.

The RF gain stages in the front end use a newly developed design to provide low noise RF amplification, excellent sensitivity and extremely low susceptibility to intermodulation and de-sensitization.

Vector Diversity

An ideal diversity system constructively combines all the energy available at both antennas. Traditional “true diversity” or “ratio diversity” methods use two complete receivers and blend the audio. This works well for FM and Digital Hybrid systems, but falls short of the ideal for today’s all-digital modes. The DSR5P's Diversity subsystem smoothly and continuously combine RF signals from two receiver front ends per channel, with differing phase angles in order to obtain maximum energy. Not only does this method deliver clean, artifactfree performance in all modes, it is actually able to take two signals compromised by multipath interference and reassemble them into a usable signal.

Compatibility

The DSR5P offers compatibility with the D-Squared and Duet digital transmitters, including the DBu, DHu, DPr, DBSM, DCHT, and M2T, and backward compatibility with any Digital Hybrid Wireless® transmitters including the SM and SMWB series, WM, HM Series, MM400 Series, HH Series, LT, LMb, UM400 Series, and SSM.

SmartNR™

With a noise floor at -120 dBV and a frequency response to 20 kHz, high frequency noise in the source audio is more apparent than in conventional wireless systems. The SmartNR algorithm has three modes. When OFF, no noise reduction is performed. When NORMAL is selected, enough noise reduction is applied to remove most of the hiss from the mic preamp and some of the hiss from lavaliere microphones. When FULL is selected, enough noise reduction is applied to remove most of the hiss from nearly any signal source of reasonable quality, assuming levels are set correctly at the transmitter.

Specifications

Operating Frequencies (MHz): Model A1B1: 470.100 - 614.375
Model B1C1: 537.600 - 691.175
961: 961.100 - 1014.900
Frequency Selection Steps: 25 kHz
Frequency Stability: ±0.001 %
Front end bandwidth: ±5.5 MHz, @ -3 dB
Sensitivity: 20 dB Sinad: 0.9 uV(-108 dBm), A weighted 60 dB Quieting: 1.12 uV (-105 dBm), A weighted
AM rejection: >60 dB, 2 uV to 1 Volt
Modulation acceptance: 85 kHz
Spurious rejection: 85 dB
Third order intercept: +11 dBm
Diversity method: Vector diversity
Antenna inputs: 50 Ohm; SMA female connectors
Audio output connectors: • Interchangeable D connector adapters or camera slot interfaces
• Dual TA3 male (mini XLR) balanced output adapter
• Battery sled adapters with TA3 male outputs
Front panel output:(5P model) Control panel TA5M with two balanced outputs
Audio Performance (overall system):
Frequency Response: 25 Hz to 20 kHz (+0/-3 dB)
THD: 0.2% (typical)
SNR at receiver output (dB): *
No Limiting OFF: 103.5
NORMAL: 107.0
FULL: 108.5
w/Limiting OFF: 108.0
NORMAL: 111.5
FULL: 113.0
Input Dynamic Range: 125 dB (with full Tx limiting)
Overall Latency (time delay): 1.4 ms with digital source, <2.9 ms with Hybrid TX
Audio Test Tone: 1 KHz, -50 to +7 dBu, <1%THD
Controls:
Front Panel: • Color LCD display
• Menu/Sel, Pwr/Back, Up/Down Arrow Buttons
• USB Port
• IR Port
Rear Panel: Proprietary connector for audio/power accessory panels.
External Power: Minimum 9 Volts to maximum 17 VDC 2.7 W; 225 mA at 12 VDC
Weight: DSR 164 grams (5.8 oz.) w/o audio adapter
Dimensions: 3.23” wide x 1.23” high x 5.50” deep 82 wide x 31 high x 140 deep mm

*Note: The dual envelope “soft” limiter provides exceptionally good handling of transients using variable attack and release time constants. Once activated, the limiter compresses 30+ dB of transmitter input range into 4.5 dB of receiver output range, thus reducing the measured figure for SNR without limiting by 4.5 dB.

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Delivery Times

Delivery times are based on when the package(s) leaves our premises. Sometimes, due to stock restrictions or a non-completed order, delivery may take longer as there is a delay with couriers, which is unfortunately out of our hands. If your order is urgent, or details change, please do let us know.
For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 30 working days of receipt (14 to initiate the process), for a full refund or for an exchange for a different product from our range. Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may affect the level of refund you receive. For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£3,050.00 (£2,541.67 Exc. VAT)
  
+
Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  LECT-DSR5P-941
Part No.:  DSR5P-941
Manufacturer:  Lectrosonics

Lectrosonics
Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.

NEXT DAY DELIVERY

We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.

FINANCE AVAILABLE

Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.00am - 5.00pm, to discuss these options and find out what's available to you.

We accept Klarna, PayPal, Maestro, Visa, Mastercard & American Express

Lectrosonics DSR5P Two Channel Digital Slot Receiver with 5-Pin Connector

£3,050.00
× Site Currency
£0.00