Lectrosonics SMWB Miniature Wideband Transmitters (Single Battery)
 Lectrosonics SMWB Miniature Wideband Transmitters (Single Battery)Lectrosonics SMWB Miniature Wideband Transmitters (Single Battery) 

Lectrosonics SMWB Miniature Wideband Transmitters (Single Battery)

    • Selectable output power to maximize battery life or operating range
    • Ultra-lightweight, corrosion resistant housing
    • Water resistant seals for use in damp environments
    • LCD interface with lockout option
  • More Details...

Model:  LECT-SMWB-A1
Part Number:  SMWB/E01-A1
Manufacturer:  Lectrosonics

(£1,265.00 Exc. VAT)
Apply For Finance
Related Products

Available Options

Single Battery
Dual Battery
A1 Band: 470.100 - 537.575
B1 Band: 537.600 - 614.375*
B2 Band: 563.200 - 639.975*
C1 Band: 614.400 - 691.175
*608.000 to 614.000 excluded

Lectrosonics SMWB Miniature Wideband Transmitters (Single Battery)


  • Selectable output power to maximize battery life or operating range
  • Ultra-lightweight, corrosion resistant housing
  • Water resistant seals for use in damp environments
  • LCD interface with lockout option
  • Programmable compatibility modes for use with a wide variety of different receivers
  • Servo Bias input circuitry
  • IR (infrared) port for fast setup
  • Covers 3 standard frequency blocks
  • Update firmware in the field via Micro SD card reader
  • Alternate use as recorder on internal microSDHC memory card

To meet the demand for both extended operating range and extended battery life, the “WB” series SM transmitters offer selectable output power of 25, 50 and 100 mW. With higher power output, the operating range is improved at the expense of battery life. When range is not an issue, a lower power level can be used to extend the battery life.

The transmitters offer hands free setup and adjustment using audible tones. They can be put to sleep to conserve battery power during setup while buried inside costuming, then awakened for normal operation when the production begins. Other features include input gain adjustment in 1 dB increments over a 44 dB range and adjustable low frequency audio roll-off for 3 dB down points at 35, 50, 70, 100, 120 or 150 Hz to control subsonic and very low frequency audio conten

The DSP-based design works with all Digital Hybrid receivers, and is backward compatible for use with Lectrosonics 200 and 100 Series, IFB receivers and some analog receivers from other manufacturers in addition to its native Digital Hybrid Wireless® operating mode.


Operating Frequencies Band A1: 470.100 - 537.575
Band B1: 537.600 - 614.375 (608.000 to 614.000 excluded)
Band B2: 563.200 - 639.975 (608.000 to 614.000 excluded)
Band C1: 614.400 - 691.175
Frequency Selection Steps Selectable; 100 kHz or 25 kHz
RF Power Output Selectable; 25, 50 or 100 mW
Frequency Stability ± 0.002%
Deviation ± 75 kHz max. (Digital Hybrid mode)
Spurious Radiation Compliant with ETSI EN 300 422-1
Equivalent Input Noise –125 dBV (A-weighted)
Dynamic Mic Input Level 0.5 mV to 50 mV before limiting Greater than 1 V with limiting
Electret Lavalier Input Level 1.7 uA to 170 uA before limiting Greater than 5000 uA (5 mA) with limiting
Line level input 17 mV to 1.7 V before limiting Greater than 50 V with limiting
Dynamic Mic Input Impedance 300 Ω
Line Level Impedance 2.7 kΩ
Input Limiter “soft” limiter with greater than 30 dB range
Gain Control Range 44 dB; digital control
Modulation indicators Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation; LCD bar graph
Frequency Response 35 Hz to 20 kHz (+/-1dB)
THD 0.2% (typical)
Audio Input Jack Switchcraft 5-pin locking (TA5F)
Antenna Galvanized steel, flexible wire
Battery 1.5 Volt AA lithium
Battery Life 50 mW (2AA) 14.5 hrs; 100 mW (2AA) 14 hrs
Weight 3.7 oz.
Dimensions 2.3 x 2.4 x 0.64 inches; 58 x 60 x 16 mm
Emission Designator 180KF3E
Storage media microSDHC memory card
File format .wav files (BWF)
Sampling rate 44.1 kHz
Recording modes
HD mono mode 24 bit - 144 kbytes per second; 32 bit - 192 kbytes per second
Split gain mode 24 bit - 288 kbytes per second; 32 bit - 384 kbytes per second

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Product Reviews

Be the first to Write a Review for this item!

× Site Currency