Lectrosonics SRB5P Camera Slot Dual UHF Receiver w/ 25-pin plate - Used

Lectrosonics SRB5P Camera Slot Dual UHF Receiver w/ 25-pin plate - Used
Lectrosonics SRB5P Camera Slot Dual UHF Receiver w/ 25-pin plate - UsedLectrosonics SRB5P Camera Slot Dual UHF Receiver w/ 25-pin plate - UsedLectrosonics SRB5P Camera Slot Dual UHF Receiver w/ 25-pin plate - Used
Lectrosonics SRB5P Camera Slot Dual UHF Receiver w/ 25-pin plate - UsedLectrosonics SRB5P Camera Slot Dual UHF Receiver w/ 25-pin plate - Used

Lectrosonics SRB5P Camera Slot Dual UHF Receiver w/ 25-pin plate - Used

  • Used
  • Condition is 8/10
  • Signs of use and light scratches on unit. no box.
  • This unit has been upgraded from an SRA to SRB.
  • Block 24 (614-639.900MHz)

Lectrosonics SRB5P Camera Slot Dual UHF Receiver

The Lectrosonics SRb5P Camera Slot UHF Receiver (Block 24) is a two-channel slot-mount Digital Hybrid Wireless diversity receiver that supports 614.400 - 639.900 MHz operating frequencies. The SRb5P receiver offers two independent channels and fits into the standard video camera slots found on professional cameras. The two audio channels can feed separate inputs or can be mixed internally to feed a single input. Plus, a DSP compatibility mode allows the SRb5P to be used with Lectrosonics IFB transmitters.

What makes the SRb5P version different than the SRb is that the SRb5P is intended for use with cameras that do not have both audio channels enabled in the camera slot. So, in addition to the SRb's audio outputs on the rear panel, the SRb5P also features a second set of outputs that are provided through a 5-pin connector on an adapter next to the control panel. This provides audio output from both channels in addition to the camera slot outputs.

The device's RF performance is extremely stable over a very wide temperature range, making the receiver well suited for the rough environmental conditions found in field production. The front panel features a menu-driven LCD interface and four membrane switches which are used to view and alter settings. The main LCD window displays the pilot tone indicator, diversity activity, RF level, audio level and transmitter battery status for both receivers.

Other features include SmartSquelch for noiseless muting and a built-in spectrum analyzer scans across the tuning range of the receiver to locate RF signals in the vicinity find clear operating frequencies. The two internal receivers can be operated separately, each using switching, antenna combining diversity, or in tandem with ratio diversity reception. Clear frequencies are easily found with the built-in RF spectrum scanner and graphical LCD. The audio outputs of the receivers can be mixed internally, or left separated for discrete recording tracks or external mixing.

Digital Hybrid Wireless

Digital Hybrid Wireless is a design that combines digital audio with an analog FM radio link to provide both high audio quality and noise-free RF performance. Using a patented algorithm to encode 24-bit digital audio information in the transmitter into an analog format, the encoded signal is then transmitted over an analog FM wireless link. At the receiver, the signal is then decoded to restore the original digital audio. This process eliminates compandor artifacts and produces an audio frequency response flat to 20 kHz.

Two Additional Audio Outputs (SRb5P Only)

The SRb5P is intended for use with cameras that do not have both audio channels enabled in the camera slot. So, in addition to the standard SRb's audio outputs on the rear panel, the SRb5P also features a second set of outputs that are provided through a 5-pin connector on an adapter next to the control panel. This provides audio output from both channels in addition to the camera slot outputs.

RF Front-End & Mixer

Each antenna signal is first passed through a high quality SAW filter to reject high power RF signals above and below the operating frequency. A high current amplifier follows the SAW filters and passes the signal to an internal splitter so that both antenna signals are available to both receivers for SmartDiversity reception.

Smart Noise Reduction (SmartNR)

The wide dynamic range of digital hybrid technology with a flat response to 20 kHz makes it possible to hear the -120 dBV noise floor in the mic preamp, or the (usually) greater noise from the microphone itself. To put this in perspective, the noise generated by the recommended 4k bias resistor of many electret lavaliere mics is -119 dBV and the noise level of the microphone's electronics is even higher. In order to reduce this noise a Smart Noise Reduction algorithm is used to remove hiss without sacrificing audio high frequency response. The SmartNR algorithm preserves the transparency of the audio signal. Plus, desired high frequency signals are not affected. The SmartNR algorithm has three modes, selectable from a user setup screen. The optimal setting for each application is subjective and selected while simply listening.

SAW Filters

The first IF stage at 244 MHz employs two state-of-the-art SAW (surface acoustic wave) filters that increase depth of filtering while preserving sharp skirts, constant group delay and wide bandwidth. This type of filter allows early primary filtering at a high frequency, before high gain is applied, to deliver maximum image rejection. The filters are made of quartz as well, which makes them very temperature stable.

IF Amplifiers

After the SAW filter, the 244 MHz IF signal is converted to 250 kHz in receiver 1 and 350 kHz in receiver 2. Only then is the majority of the gain applied, just before the signal is converted to audio. Although these IF frequencies are unconventional in a wide deviation (±75 kHz) system, they offer outstanding AM rejection over a wide range of signal strengths and they support noise improvement at low signal strengths.

Digital Pulse Counting Detector

The SRb5P Series receivers use a simple, yet effective digital pulse detector to demodulate the FM signal rather than a conventional quadrature detector. This eliminates thermal drift, improves AM rejection and provides very low audio distortion.

Supersonic Noise-Based Dynamic Filter & Squelch

In addition to SmartNR, all hybrid receivers are equipped with a supersonic noise-based dynamic filter and squelch system. The incoming audio is monitored for energy above 22 kHz, pilot tone excepted. Excessive high frequency energy indicates that the received signal is too weak to achieve an acceptable signal-to-noise ratio. Under marginal conditions, a variable low pass filter is rolled in dynamically, masking the noise while preserving as much of the transmitted signal as possible. When the channel is too noisy even for the filter, the audio is squelched. Plus, unlike analog squelching, this noise-based system requires no calibration and there is no better way to track the signal-to-noise ratio than to measure it directly.

Smart Squelch

The SRb5P Series receivers are designed to remove distracting noise without the squelching action itself becoming a distraction. They use a technique that waits for a word or syllable to be completed before squelching. Another technique incorporates recent squelching history and recent signal strength, adjusting squelching behavior dynamically for the most serviceable result under variable conditions. Using these and other techniques, the receivers can deliver acceptable audio quality from otherwise unusable signals.

Talkback Function

The Talkback function provides a second audio channel separate from the main audio channel to allow the user to communicate with staff and crew. When the button on the housing is pressed, the audio output on the receiver is switched to a different output jack. When the button is released, the audio output returns to the main output jack on the receiver.

Automatic Power State Restoration

The firmware "remembers" whether it was turned on or off when power is disconnected and returns to that state when power is restored.

Specifications

Operating Frequencies 614.400 - 639.900 MHz
Frequency Adjustment Range 25.5 MHz (in 100 kHz steps)
Channel Separation 100 kHz
Receiver Type Dual conversion (superheterodyne)
IF Frequency Channel 1: 248.450 MHz and 350.000 kHz
Channel 2: 243.950 MHz and 250.000 kHz
Frequency Stability ±0.001%
Bandwidth 26 MHz at -3 dB (front end bandwidth)
Sensitivity 20 dB SINAD: 1.0 uV (-107 dBm) A weighted
60 dB Quieting: 2.2 uV (-100 dBm) A weighted
Squelch Quieting >100 dB (typical)
AM Rejection >60 dB (4 uV to 1 V)
Modulation Acceptance 85 kHz
Image & Spurious Rejection 85 dB
Third Order Intercept 0 dBm
Diversity Method
FM Detector Digital Pulse Counting Detector operating at 250 and 350 kHz
RF Spectrum Analyzer Coarse and fine scanning modes for RF spectrum site survey
Antenna Inputs 50 ohms (SMA female connectors)
Audio Outputs Interchangeable D connector adapters for camera slot interfaces
Dual TA3 male (mini XLR) balanced output adapter
Balanced output adapter with fixed cables
Two additional balanced audio outputs (standard TA5M 5-pin connector)
Front Panel Audio Output Front panel TA5M with two balanced outputs
Audio Output Level Adjustable -50 to +5 dBu in 1 dB steps (unbalanced output is 6 dB lower)
Audio Channel Crosstalk -80 dB or better
Front Panel Controls and Indicators Sealed panel with membrane switches
LCD monitors pilot tone
Antenna phase
Receiver battery level
Transmitter battery status
Audio level
RF level
Audio Test Tone 1 kHz (±5 dBu balanced output); 1% THD

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£1,799.00 (£1,499.17 Exc. VAT)
+

Availability:  

1 in stock now  

1 in stock now

Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  PNUEQ-LECT-SRB5P
Part No.:  PPN-96
Manufacturer:  Lectrosonics

Lectrosonics
Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.

NEXT DAY DELIVERY

We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.

FINANCE AVAILABLE

Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.30am - 5.30pm, to discuss these options and find out what's available to you.

We accept PayPal, Visa, Mastercard, Maestro, American Express

Lectrosonics SRB5P Camera Slot Dual UHF Receiver w/ 25-pin plate - Used

£1,799.00
× Site Currency
£0.00