Lectrosonics SRC + SMWB + SMDWB Kit w/ External Back Plate Adapter + TX Accessories Bundle

Lectrosonics SRC + SMWB + SMDWB Kit w/ External Back Plate Adapter + TX Accessories Bundle
Lectrosonics SRC + SMWB + SMDWB Kit w/ External Back Plate Adapter + TX Accessories BundleLectrosonics SRC + SMWB + SMDWB Kit w/ External Back Plate Adapter + TX Accessories BundleLectrosonics SRC + SMWB + SMDWB Kit w/ External Back Plate Adapter + TX Accessories BundleLectrosonics SRC + SMWB + SMDWB Kit w/ External Back Plate Adapter + TX Accessories Bundle

Lectrosonics SRC Dual-Channel Receiver w/ External Back Plate + SMWB + SMDWB Transmitters w/ Accessories Bundle

Bundle Includes:

  • Lectrosonics SRC Dual-Channel Slot Mount ENG Receivers
  • Lectrosonics Back plate Adaptors for the SRB & SRC (SR EXT)
  • Lectrosonics SMDWB Miniature Wideband Transmitters (Double Battery)
  • Lectrosonics PSMDWB Leather Pouch for SMDWB Transmitter
  • Lectrosonics SMWB Miniature Wideband Transmitters (Single Battery)
  • Lectrosonics PSMWB Leather Pouch for SMWB Transmitters
  • PInknoise Custom Output & Power Cable Set for lectrsonics SRC (w/ SREXT)
  • Lectrosonics CCMINI Soft Padded Carry Case

Lectrosonics SRC & SRc5P Dual-Channel Slot Mount ENG Receivers

The SRc5P and SRc consists of two separate receivers built into a single, ultra compact housing with adapters for video camera receiver slots and for stand-alone use. Digital Hybrid Wireless® technology provides superb, compandor-free audio quality and compatibility with other wireless systems. The RF performance is extremely stable over a very wide temperature range, making the receiver perfectly suited to the rough environmental conditions found in field production.

DSP compatibility modes allow the receiver to be used with a variety of Lectrosonics systems, other brands of wireless systems and with Lectrosonics IFB transmitters.

  • Fits camera “slots,” Lectrosonics Duopack adapter and Octopack multicoupler, and operates stand-alone with various adapters
  • Tunes over a 75 MHz range* (3 blocks)
  • Dual receiver design for two channels with phase switched diversity or single channel with ratio diversity operation
  • Digital Hybrid Wireless® with compatibility modes for use with other transmitters
  • Tracking front-end filters for high performance in tough RF environments
  • LCD with RF spectrum scanning
  • SmartSquelchTM DSP-controlled, noise based filtering and squelch
  • DSP-based pilot tone for squelch control
  • IR sync port for quick transmitter setup (LMb, LT, HHa, HMa, & SSM)
  • SmartTune operation for quick and confident frequency selection

Frequency ranges -

  • A1 - 470-537 MHz or Blocks 470, 19 & 20.
  • B1 - 537-614 MHz or Blocks 21, 22 & 23
  • B2 - 563-640 MHz or Blocks  22, 23 606 & 24
  • C1 - 614-691 MHz or Blocks 24, 25 & 26

Included Accessories

  • 1 - Adjustment Tool (Part# 35679)
  • 2 - Antennas (Part #AMJ-XX)
  • 1 - Quickstart Guide

Lectrosonics SR EXT SR Receiver Mounting Kit for Stand Alone Operation

The Lectrosonics SREXT is a connector panel adapter kit for the Lectrosonics SR Dual Slot-In Receiver. The kit is intended to provide the freedom of using the SR Receiver on standard, non slot-in mount scenarios. On the included connector panel are two TA3-male jacks for balanced output and a power jack with a locking connector. An unterminated power cable may trimmed to a desired length.


Lectrosonics SMDWB Miniature Wideband Transmitters (Double Battery)

Features

  • Selectable output power to maximize battery life or operating range
  • Ultra-lightweight, corrosion resistant housing
  • Water resistant seals for use in damp environments
  • LCD interface with lockout option
  • Programmable compatibility modes for use with a wide variety of different receivers
  • Servo Bias input circuitry
  • IR (infrared) port for fast setup
  • Covers 3 standard frequency blocks
  • Update firmware in the field via Micro SD card reader
  • Alternate use as recorder on internal microSDHC memory card

To meet the demand for both extended operating range and extended battery life, the “WB” series SM transmitters offer selectable output power of 25, 50 and 100 mW. With higher power output, the operating range is improved at the expense of battery life. When range is not an issue, a lower power level can be used to extend the battery life.

The transmitters offer hands free setup and adjustment using audible tones. They can be put to sleep to conserve battery power during setup while buried inside costuming, then awakened for normal operation when the production begins. Other features include input gain adjustment in 1 dB increments over a 44 dB range and adjustable low frequency audio roll-off for 3 dB down points at 35, 50, 70, 100, 120 or 150 Hz to control subsonic and very low frequency audio conten

The DSP-based design works with all Digital Hybrid receivers, and is backward compatible for use with Lectrosonics 200 and 100 Series, IFB receivers and some analog receivers from other manufacturers in addition to its native Digital Hybrid Wireless® operating mode.


Lectrosonics PSMDWB Leather Pouch for SMDWB Transmitter

Sewn leather pouch with plastic window for SMDWB dual battery transmitter. Features a rotating belt clip and press stud fastener with built-in strap to secure the transmitter.


Lectrosonics SMWB Miniature Wideband Transmitters (Single Battery)

Features

  • Selectable output power to maximize battery life or operating range
  • Ultra-lightweight, corrosion resistant housing
  • Water resistant seals for use in damp environments
  • LCD interface with lockout option
  • Programmable compatibility modes for use with a wide variety of different receivers
  • Servo Bias input circuitry
  • IR (infrared) port for fast setup
  • Covers 3 standard frequency blocks
  • Update firmware in the field via Micro SD card reader
  • Alternate use as recorder on internal microSDHC memory card

To meet the demand for both extended operating range and extended battery life, the “WB” series SM transmitters offer selectable output power of 25, 50 and 100 mW. With higher power output, the operating range is improved at the expense of battery life. When range is not an issue, a lower power level can be used to extend the battery life.

The transmitters offer hands free setup and adjustment using audible tones. They can be put to sleep to conserve battery power during setup while buried inside costuming, then awakened for normal operation when the production begins. Other features include input gain adjustment in 1 dB increments over a 44 dB range and adjustable low frequency audio roll-off for 3 dB down points at 35, 50, 70, 100, 120 or 150 Hz to control subsonic and very low frequency audio conten

The DSP-based design works with all Digital Hybrid receivers, and is backward compatible for use with Lectrosonics 200 and 100 Series, IFB receivers and some analog receivers from other manufacturers in addition to its native Digital Hybrid Wireless® operating mode.


Lectrosonics PSMWB Leather Pouch for SMWB Transmitters

Sewn leather pouch with plastic window for SMWB single battery transmitter. Features a rotating belt clip and press stud fastener with built-in strap to secure the transmitter.


Pinknoise Custom Output & Power Cable Set for Lectrosonics SRC (w/SREXT)

This set includes 2 x Right Angled TA3 to Male 3-Pin XLR's and 1 x Right Angled Lectrosonics Locking Jack to Straight Hi-Rose cable.

All cables are hand made with the best quality cables and connectors. 


Lectrsonics CCMINI Soft Padded Carry Case

A soft sided, padded and zippered carrying case for compact wireless systems such as the UCR400, UCR401, and other UCR units.

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£5,499.00 £7,765.15
Saving Of:  £2,266.15 (29%)
(£4,582.50 Exc. VAT)
+

Availability:  

2 in stock now  

2 in stock now

Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  PN-BNDL-SRC-SMWB-SMDWB
Manufacturer:  Lectrosonics

Lectrosonics
Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.

NEXT DAY DELIVERY

We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.

FINANCE AVAILABLE

Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.30am - 5.30pm, to discuss these options and find out what's available to you.

We accept PayPal, Visa, Mastercard, Maestro, American Express

Lectrosonics SRC + SMWB + SMDWB Kit w/ External Back Plate Adapter + TX Accessories Bundle

£5,499.00
CUSTOMERS ALSO BOUGHT
Betso Bowtie Wideband Omnidirectional Antenna for Sound Bags
Betso Bowtie Wideband Omnidirectional Antenna for Sound Bags
  • Designed for use on a sound bag
  • Bandwidth of 470-700 MHz
  • Omnidirectional polar pattern (horizontal plane)
  • Inbuilt 700 MHz low pass filter
18 in stock now  18 in stock now
£159.00  £169.00
Hawkwoods NP1 Power Cup Adapters with TA4 Fly-lead for Sound Devices Scorpio (Select Variant)
Hawkwoods NP1 Power Cup Adapters with TA4 Fly-lead for Sound Devices Scorpio (Select Variant)
  • Compatible with NP1 type batteries
  • Designed specifically for the Sound Devices Scorpio
  • Fitted with a high quality TA4 Locking connector
  • Multiple options to suit your personal preference
Only 4 in stock  Only 4 in stock
£50.40  
Lectrosonics Back Plate Adaptors for the SRB & SRC
Lectrosonics Back Plate Adaptors for the SRB & SRC
  • Back plate adaptors for Lectrosonics SRB/E01
  • Select from three models (more details below)
  • Units come with screws
  • Please select model below
Only 9 in stock  Only 9 in stock
£136.00  £162.84
Lectrosonics CCMINI Soft Padded Carry Case
Lectrosonics CCMINI Soft Padded Carry Case
  • Lectrosonics soft sided case
  • Padded and zipped case
  • Carry case perfect for compact transmitters and receivers
  • Keeps your units safe whilst on the move
9 in stock now  9 in stock now
£39.00  £42.00
Lectrosonics PSMDWB Leather Pouch for SMDWB Transmitter
Lectrosonics PSMDWB Leather Pouch for SMDWB Transmitter
  • Sewn leather pouch with plastic window
  • Designed for the SMDWB dual battery transmitter
  • Features a rotating belt clip and press stud fastener
  • With built-in strap to secure the transmitter
14 in stock now  14 in stock now
£25.00  £42.00
Lectrosonics PSMWB Leather Pouch for SMWB Transmitters
Lectrosonics PSMWB Leather Pouch for SMWB Transmitters
  • Sewn leather pouch with plastic window
  • Designed for the SMDWB dual battery transmitter
  • Features a rotating belt clip and press stud fastener
  • With built-in strap to secure the transmitter
12 in stock now  12 in stock now
£25.00  £42.00
× Site Currency
£0.00