Line Audio 2MP 2 Channel Microphone Preamp

Line Audio 2MP 2 Channel Microphone Preamp
 Line Audio 2MP 2 Channel Microphone PreampLine Audio 2MP 2 Channel Microphone Preamp 

Line Audio 2MP 2 Channel Microphone Preamp

Based on carefully designed circuitry that ensures un-coloured and detailed audio offering highly transparent audio gain.

The design is DC-coupled throughout, except for the matched plastic film input capacitors and is based on a low noise, discrete, class A, matched transistor differential pair input stage, followed by low noise, low distortion O/P-amplifiers. Overall the signal path is short and audibly transparent and features excellent audio quality.

The inputs are electronically balanced XLR microphone inputs with 48V phantom power, capable of delivering full phantom current on ALL channels without the voltage "diving" or adding noise and hum. The XLR outputs are electronically balanced (with a slow DC-offset servo).

All XLR sockets are gold-plated original Neutrik's, to minimize noise and distortion and to ensure good gain-potentiometer performance the first stage has only two fixed gains with the gain-potentiometer is inserted at a later stage.


Power requirement 48V DC 0.2A. External 100V-240V AC power supply included (EU plug). Other plugs available on request.
Frequency response 5Hz - 100 KHz +-0.5dB (2Hz - 200KHz -3dB)
Gain 60dB with balanced output. (with unbalanced output 54dB) The gain of the input stage has two fixed settings giving max 60dB or 40dB gain.
Harmonic distortion 0.002% at -6dB below max level, at full gain of input stage. 0.005% at -3dB below max level, at full gain of input stage
Highpass filter 100Hz, 12dB/oct switchable. Other frequency on special request
Inputs Electronically balanced
Input impedance 10Kohm
Input level max 3.2V RMS / 320 mVRMS (-20dBPAD / no PAD)
Input noise level -128 dBU/dBm (100ohm termination, 20-20KHz B/W) -133 dBV (input shorted)
Phantom power +48V fed through 2 x 6.8 Kohm resistors
Phantom current 10mA per channel, all channels loaded
Outputs Electronically balanced.
Output impedance 300 ohm (150ohm+150ohm)
Output level max 15V RMS
Output DC offset max 1mV at 40dB gain, max 10mV at 60dBgain (PAD disengaged)
XLR Polarity Pin 1 ground, pin2 positive, pin 3 negative.
For unbalanced output use pin2 for signal and pin1 for signal ground (pin 3 ahould be left unconnected).
Size 173 mm (W), 44 mm (H), 158mm (D).

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Average Rating (1 Review):  
Write a Review and share your opinions!

2MP Mic Preamp
Saturday, 1 April 2017  | 

Hi There I ordered ordered the Line Audio 2MP preamp via Pinknoise Systems (Ricky in Sales). I found the 2MP to be a very, very good Mic preamp. Unfortunately for me it was not suitable for all of my needs as I wanted to be able to plug my Electro Acoustic through one of the two preamps. I was informed that the preamps are ideally only for recording Acoustic via microphone and not directly plugged. A great pity for me but the recorded vocal sounds amazing through this 2 channel unit and it has the smallest footprint I have seen. Absolutely recommended for vocals

Was this helpful to you?  Yes  /  No

3 of 6 people found this review helpful.

£229.00 £252.00
Saving Of:  £23.00 (9%)
(£190.83 Exc. VAT)


Sold out - More soon  

Sold out - More soon

Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  LA-2MP
Part No.:  2MP
Manufacturer:  Line Audio

Line Audio
Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.


We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.


Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.30am - 5.30pm, to discuss these options and find out what's available to you.

We accept PayPal, Visa, Mastercard, Maestro, American Express

Line Audio 2MP 2 Channel Microphone Preamp

Line Audio OM1 Omni Condenser Microphone
Line Audio OM1 Omni Condenser Microphone
  • This omnidirectional microphone has a natural, detailed and balanced response
  • The small size (about the same as a normal XLR plug) makes it easy to place
  • Delivered with foam windsheild and microphone holder (clip)
  • These are quality microphones made for demanding situations
Sold out - More soon  Sold out - More soon
Rode Stereo Spacing Bar 20cm
Rode Stereo Spacing Bar 20cm
  • The RØDE Stereo Bar is a robust solution for mounting two microphones in a stereo array
  • With clearly marked spacing of up to 20cm, as well as angle and measurements
  • Perfect for quick and easy ORTF and XY positioning
  • This thoughtful design makes it quick and easy to achieve complex recording arrays
Only 16 in stock  Only 16 in stock
× Site Currency