Line Audio OM1 Omni Condenser Microphones w/ Rode WS8 & Stereo Bar Bundle
This Bundle Includes
- 2 x Line Audio OM1 Omni Condenser Microphones
- 2 x Rode WS8 Deluxe Windshields
- 1 x Rode Stereo Spacing Bar 20cm
This bundle features a pair of highly reviewed Line Audio OM1's, matched with a Rode Stereo Bar & WS8 Windshields for an almost unbeatable stereo setup.
Line Audio OM1 Omni Condenser Microphone
This omnidirectional microphone has a natural, detailed and balanced response. Perfect for natural reproduction of acoustical instruments such as members of the bowed and plucked string-families, grand piano, brass, drum overhead, percussion, overhead choir and voice -with a minimum of colouration. The response is very smooth and flat, with fine off axis performance.
suitable for professional studio and PA use, with a pricetag at the hobbyist level!
The small size (about the same as a normal XLR plug) makes it easy to place, without being in the way. Its size and black colour makes it close to invisible on stage. Delivered with foam windsheild and microphone holder (clip).
During manufacturing each capsule is measured, selected and trimmed by us to close tolerances. Out of range capsules are rejected. This in combination with the internal circuitry, results in a response with a unique flatness. These are quality microphones made for demanding situations.
|Type ||Condenser microphone (permanently biased 10mm capsule) |
|Polar pattern ||Omni |
|Frequency response ||20-20000Hz +-1dB (on-axis, at 1m distance, 1/12 octave narrow smoothing, 23 C) |
|Phantom power ||12 - 48V (P48 recommended for best performance) |
|Current consumption ||4 mA |
|Impedance ||<100 Ohm |
|Sensitivity ||8mV/PA -42dB |
|S/N ratio (DIN/CCIR) ||76dB(A)/66dB |
|Noise level ||18dB(A) |
|Max SPL ||133dB @0.5% THD (130dB@24V, 120dB @ 12V) |
|Size ||77mm x 20mm |
Rode WS8 Deluxe Windshield
The RØDE WS8 Deluxe Windshield is an easy to use high-performance windshield for RØDE's most popular small diaphragm condenser microphones, the NT5, NT55 and NT6.
Designed to reduce wind noise when recording in adverse environmental conditions, the WS8 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.
The WS8 supports microphones of 20mm diameter and 27mm capsule depth.
Rode Stereo Spacing Bar 20cm
The RØDE Stereo Bar is a robust solution for mounting two microphones in a stereo array.
With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RØDE Stereo Bar makes it quick and easy to achieve complex recording arrays.
The 5/8” mounting threads are supplied with accompanying spacing clips to allow for easy positioning for stacked arrays, and the robust ABS construction makes the Stereo Bar stable and durable, allowing it to easily support the weight of two large diaphragm microphones such as the RØDE K2.
- Up to 20cm spacing
- Supports spaced and stacked configurations
- X-Y & ORTF guide
- Spacing Measurements
- Quick setup and adjustments
- Weight: 45gm
- Dimensions: 17mmH x 240mmW x 70mmD