Line Audio OMNI1 w/ Rode WS8 Windshields & Stereo Bar Bundle

£320.00

(£266.67 ex. VAT )
- +

5 in stock now

Related Products

Related Products

Only 4 available
£360.00 (£300.00 Exc. VAT) )
Details

4 in stock now

£350.00 (£291.67 Exc. VAT) )
Details

3 in stock now

PRODUCT DETAILS

Line Audio OMNO1 w/ Rode WS8 Windshields & Stereo Bar Bundle

This Bundle Includes

This bundle features a pair of highly reviewed Line Audio OMNI1's, matched with a Rode Stereo Bar & WS8 Windshields for an almost unbeatable stereo setup.


Line Audio OMNI1 Omni Condenser Microphone

This omnidirectional microphone has a natural, detailed and balanced response. Perfect for natural reproduction of acoustical instruments such as members of the bowed and plucked string-families, grand piano, brass, drum overhead, percussion, overhead choir and voice -with a minimum of colouration. The response is very smooth and flat, with fine off axis performance.

It's suitable for professional studio and PA use, with a pricetag at the hobbyist level!

The small size (about the same as a normal XLR plug) makes it easy to place, without being in the way. Its size and black colour makes it close to invisible on stage. Delivered with foam windsheild and microphone holder (clip).

During manufacturing each capsule is measured, selected and trimmed by us to close tolerances. Out of range capsules are rejected. This in combination with the internal circuitry, results in a response with a unique flatness. These are quality microphones made for demanding situations.

OM1 Specifications

TypeCondenser microphone (permanently biased 10mm capsule)
Polar patternOmni
Frequency response20-20000Hz +-1dB (on-axis, at 1m distance, 1/12 octave narrow smoothing, 23 C)
Phantom power12 - 48V (P48 recommended for best performance)
Current consumption4 mA
Impedance<100 Ohm
Sensitivity8mV/PA -42dB
S/N ratio (DIN/CCIR)76dB(A)/66dB
Noise level18dB(A)
Max SPL133dB @0.5% THD (130dB@24V, 120dB @ 12V)
Size77mm x 20mm

Rode WS8 Deluxe Windshield

The RØDE WS8 Deluxe Windshield is an easy to use high-performance windshield for RØDE's most popular small diaphragm condenser microphones, the NT5NT55 and NT6.

Designed to reduce wind noise when recording in adverse environmental conditions, the WS8 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.

The WS8 supports microphones of 20mm diameter and 27mm capsule depth.


Rode Stereo Spacing Bar 20cm

The RØDE Stereo Bar is a robust solution for mounting two microphones in a stereo array.

With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RØDE Stereo Bar makes it quick and easy to achieve complex recording arrays.

The 5/8” mounting threads are supplied with accompanying spacing clips to allow for easy positioning for stacked arrays, and the robust ABS construction makes the Stereo Bar stable and durable, allowing it to easily support the weight of two large diaphragm microphones such as the RØDE K2.

Features

  • Up to 20cm spacing
  • Supports spaced and stacked configurations
  • X-Y & ORTF guide
  • Spacing Measurements
  • Quick setup and adjustments

Specifications

  • Weight: 45gm
  • Dimensions: 17mmH x 240mmW x 70mmD

Specifications

Line Audio Omni1 Omnidirectional Condenser Microphone

TypeCondenser microphone (permanently biased 10mm capsule)
Polar patternOmni
Frequency response20-20000Hz +-1dB (on-axis, at 1m distance, 1/12 octave narrow smoothing, 23 C)
Phantom power12 - 48V (P48 recommended for best performance)
Current consumption4 mA
Impedance<100 Ohm
Sensitivity8mV/PA -42dB
S/N ratio (DIN/CCIR)76dB(A)/66dB
Noise level18dB(A)
Max SPL133dB @0.5% THD (130dB@24V, 120dB @ 12V)
Size77mm x 20mm
ConnectorXLR (Neutrik gold plated)

Line Audio OMNI1 w/ Rode WS8 Windshields & Stereo Bar Bundle

£320.00

(£266.67 ex. VAT )
- +

5 in stock now