£16.00 - Replacement hot shoe suspension mount for the CB-850 Sniper Microphone
- A sturdy mount with elastic rubber to ensure reduction in movement noise
- While also providing a tight grip onto the microphone.
|
|
£36.00 - Features professional molded rubber suspenders
- Absorbs & isolates mic from "swinging" & handling noise
- Works on Boompoles & mic stands (adapter incl.)
- Fits Rode NTG lineup, Apature
|
|
£33.00 - COSI internal mic holders are interchangable
- The holder slides into the rear of the COSI and turn to lock into place
- Available microphone holder diameters, 19mm, 20mm, 21mm & 22mm
|
|
£249.00 - Soft variant for use with Schoeps CUT60
- Hard grade is very good for outdoor situations with furry windscreen
- Elliptic isolators are smaller and smarter
- Has a wide range of elasticity grades
|
|
£249.00 - Soft variant for use without Schoeps CUT60
- Soft grade is very good for indoor locations use with light foam
- Elliptic isolators are smaller and smarter
- Has a wide range of elasticity grades
|
|
£246.00 - Designed specifically for the Schoeps CCM compact microphone series
- Indoor suspension fitted with a single isolator for maximum efficiency and minimum size
- Inserted in a cradle, the Lemo connector allows direct screw of the CCM
- The signal is sent to the XLR fixed to the standard Osix base swivel
|
|
£246.00 - Designed specifically for the Schoeps CCM compact microphone series
- Indoor suspension fitted with a single isolator for maximum efficiency and minimum size
- Inserted in a cradle, the Lemo connector allows direct screw of the CCM
- The signal is sent to the XLR fixed to the standard Osix base swivel
|
|
£267.00 - An optimal compromise between vibration isolation and firmness of the mic mounting
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£267.00 - An optimal compromise between vibration isolation and firmness of the mic mounting
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£267.00 - Compatible with Neumann KMR 81, Sennheiser MKH 416, AKG SE 300 B
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£267.00 - Compatible with Sennheiser MKH 20, MKH 30, MKH 40, MKH 50
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£336.00 - Compatible with Sennheiser MKH418 & Sennheiser MKH418 S
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£267.00 - Compatible with Sennheiser MKH 60, Schoeps CMC + CUT1, Schoeps CMIT 5U
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£267.00 - For Schoeps CMIT 5U, CMC + CUT1, Sennheiser K6 + ME 62, K6 + ME 64 & Sanken CS-3e
- All OSIX & MINIX are now equipped with unbreakable plastic isolators
- Elastic properties give isolation and firmness qualities to the suspensions
- Cinela is considered the ultimate in mic isolation for boompole mounting
|
|
£366.00 - This product is an adaptation of the Schoeps bar STCg for ORTF with CCM microphones
- The body of the microphone is simply screwed to the Lemo plugs
- The two axis swivel (Zephyx type) provides full orientation of the head
- The cable 2 x Lemo + XLR5M is a full part of the suspension
|
|
£69.00 - Features dual Rycote Lyre mounts for maximum isolation from handling noise
- Compatible with Rode NTG, NT5, NT55 & M5 Microphones
- Dimensions: 24 (H) x 6 (W) x 11.7 (D) cm
- Weight: 224g
|
|
£45.00 - Suspension shock mount with camera shoe adaptor
- Features dual Rycote Lyre mounts for maximum isolation from handling noise
- Dimensions: 7.5 (H) x 3.5 (W) x 11.7 (D) cm
- Weight: 54g
|
|
£33.00 - The RØDE Stereo Bar is a robust solution for mounting two microphones in a stereo array
- With clearly marked spacing of up to 20cm, as well as angle and measurements
- Perfect for quick and easy ORTF and XY positioning
- This thoughtful design makes it quick and easy to achieve complex recording arrays
|
|
£144.00 - Designed specifically for Scheops CMIT5U Microphone
- Aerodynamic and Durable
- Provides superior performance and durability
- Ideal for boom-pole use
|
|
£132.00 - Windshield, suspension and handle kit
- Up to -25dB wind noise attenuation
- Suitable for microphones with interference tubes between 5cm and 15cm long
- Suitable for microphones with a diameter between 19mm and 22mm
|
|
£42.00 - Ideal for mini shotgun microphones
- Microphone diameters of 9.5mm
- No elastic
- Virtually unbreakable
|
|
£39.00 - Second-to-none isolation against handling noise and vibrations
- Ideal for microphones with a front diameter of 20mm and back diameter of 9.5mm
- The lyre system is virtually unbreakable
- No elasticated parts — never sags or needs rethreading
|
|
£48.00 - Second-to-none isolation against handling noise and vibrations
- Fits microphones with a diameter of 20mm
- The lyre system is virtually unbreakable
- No elasticated parts — never sags or needs rethreading
|
|
£48.00 - Ideal for microphones such as the Schoeps CCM Series
- Microphone diameter up to 9.5mm
- Virtually indestructible
- No elastic
|
|
£48.00 - Virtually indestructible
- Offers much improved isolation from camera noise
- No elasticated parts — never sags or needs re-threading
- Standard bar with 25mm (1") centres
|
|
£48.00 - Virtually indestructible
- Offers much improved isolation from camera noise
- No elasticated parts — never sags or needs re-threading
- Standard bar with 25mm (1") centres
|
|
£45.60 - Heavy duty of the INV-6
- Ideal for short shotgun microphones with light windshields
- Virtually indestructible
- No elastic
|
|
£48.00 - Virtually indestructible
- Offers much improved isolation from camera noise
- No elasticated parts — never sags or needs re-threading
- 2 x 19-25mm universal clips, with Standard (70mm wide) Lyre
|
|
£49.50 - Suitable for microphones from 19mm to 34mm in diameter
- Ideal for shotgun microphones with front end windshields
- Virtually indestructible
- No elastic
|
|
£48.00 - Reduces unwanted rumble noises
- Suitable for microphones with a diameter of 30mm
- Virtually indestructible
- No elastic - no sagging
|
-19mm.jpg)
-1.jpg)
-1.jpg)
