Pinknoise Bundle: Betso WTCS-1 Timecode Slate w/ SBOX2-RF Bundle

Pinknoise Bundle: Betso WTCS-1 Timecode Slate w/ SBOX2-RF Bundle
Pinknoise Bundle: Betso WTCS-1 Timecode Slate w/ SBOX2-RF BundlePinknoise Bundle: Betso WTCS-1 Timecode Slate w/ SBOX2-RF BundlePinknoise Bundle: Betso WTCS-1 Timecode Slate w/ SBOX2-RF Bundle

Pinknoise Bundle: Betso WTCS-1 Timecode Slate w/ SBOX2-RF Bundle

New BETSO WTCS-1 wireless time code slate is carefully designed to meet rising demands on displayed information capability, overall product durability and lightweight and "plug and play" functionality. It is WiFi ready for cooperation with iOS MovieSlate application and has our latest RF transceiver module for wireless transmission of time code and status information. And of course a lot of more cool features to make your work easier.

RF Transmission
Our whole new concept of wireless transmission of time code and status information is ideal for simple on stage workflow control. Each device connected to the network will be continuously jammed from transmitter and on each device you can observe status information of all other devices in the network.

The operating range is up to 500m within the line of sight. The RF protocol incorporates frequency hopping spread spectrum technology approach which ensures robust functionality even in the environment with high RF noise.

When the unit set as receiver is out of the RF range, it keeps generating synced timecode.

All Time Code and Word Clock Formats
The WTCS-1 can receive, precisely jam or start to generate new time codes of all existing SMPTE time code formats.

Also, all commonly used word clock formats are supported, including their pull-up and pull-down optionsAll Time Code and Word Clock Formats.

The WTCS-1 can receive, precisely jam or start to generate new time codes of all existing SMPTE time code formats.
Also, all commonly used word clock formats are supported, including their pull-up and pull-down options

1" Super-bright graphical LED display with Anti-glare Surface
Ambient light independent time code readouts are guaranteed thanks to a large, 1-inch high, super-bright graphical LED display with a special anti-glare surface that avoids sun reflection. Its brightness can be easily adjusted in ten modes to meet actual light conditions or can be set automatically in relation to actual ambient light conditions thanks to integrated sensor.

Solid and Precise Mechanical Construction with Reduced Weight and Decent Dimensions
During the development phase, special focus was kept on the infield daily use. Therefore the main body is made from very stiff anodized aluminium alloy using CNC milling and laser cutting technologies. This was the only way to get a very robust, but still as small and as lightweight a device as possible.

The highest in quality demands were also put on the details, which led to ball bearing and stiff wood utilization in the arms of the slate and high quality writing sheets.

Advanced Features

  • RF transmission of time code and device status information
  • Factory GPS based calibration of TCXO with better than 0,1ppm accuracy result
  • Jamming calibration feature to copy master's TCXO precision
  • Cross jamming allowes timecode sync between two different framerates
  • Automatic power ON function after active time code detection
  • Can automatically power down after long period withou manipulating with the slate
  • Can flash during each zero frame of each second and also in the frame of clapping
  • Backlight of writing area of the slate
  • Allows to set 180° display rotation for upside down WTCS-1 LED display readout including automatic display rotation
  • Display brightness can be adjusted automatically according to actual ambient light conditions
  • Time code offset adjustment from -10.0 to 10.0 frames with 0.1 frame step
  • Variable user bits settings including preset value, jammed user bits and live external timecode insertion
  • Real time clock option for user bits settings including combinations of year, month, day, hour, minute and second
  • Starts to generate exact UTC time code synchronized all over the world
  • USB connector available for future firmware upgrades

 

Betso SBOX-2RF Timecode and WC Generator with RF Transmission

The SBOX-2RF is an extremely accurate, very compact and affordable time code and word clock generator with RF transmission of time code and status information. SBOX-2RF improves time code sync precision of its ancestor, keeps very easy to use "plug and play" operation control, along with its 1" large

OLED display. New RF transmission brings wireless continuous jamming of time code with 0 ppm error and clear status information of all connected devices to the network with just one click of button. What we most love on new SBOX-2RF is its very long operational time from a single AA battery.

RF Transmission
Our whole new concept of wireless transmission of time code and status information is ideal for simple on stage workflow control. Each device connected to the network will be continuously jammed from transmitter and on each device you can observe status information of all other devices in the network.

The operating range is up to 500m within the line of sight. The RF protocol incorporates frequency hopping spread spectrum technology approach which ensures robust functionality even in the environment with high RF noise.

When the unit set as receiver is out of the RF range, it keeps generating synced timecode.

All time code and word clock formats
The SBOX-2RF can receive, precisely jam or start to generate new time codes of all existing SMPTE time code formats.
Also, all commonly used word clock formats are supported, including their pull-up and pull-down options.

Extremely Easy To Use
To use, simply connect the cable with the active time code and leave the rest to SBOX-2RF!

The automatic turn on and jamming function provides the most user-friendly and reliable time code syncing as the SBOX-2RF will automatically distinguish correct time code format, calibrate internal TCXO to obtain the same time base as your source, and start generating jammed time code.

You will find the time code synched to the source within less than 0.5 frame drifts even after two days of continuous use.

Ultra Highly Accurate TCXO
Embedded high precision temperature compansated crystal oscillator TCXO with frequency accuracy off 0.2 ppm is the fundamental piece of hardware for stable and accurate time code and word clock generator.

The superior quality of TCXO is best suited for changing environmental conditions where temperatures vary a lot during the day. Even in extreme weather conditions, the SBOX-2RF will keep time codes in sync.

TCXO Calibration
Thanks to our sophisticated software methods, the ultra-highly accurate TCXO can be further calibrated to achieve much better than 0.2 ppm accuracy. These methods can be applied both during jamming, when TCXO is calibrated to obtain exactly the same time base as the source of time code, or during calibration, from BETSO GPS-1 devices which offer calibrating based on GPS atomic clocks.

This accuracy is almost impossible to beat. And, as you know, accuracy is what TC syncing is all about!

Top Build Quality
Thanks to precise CNC milling manufacturing technology, anodized aluminium alloy materials, original hi-quality connectors and other components, the SBOX-2RF is very durable but still versatile.

Small, Lightweight, and Easy to Mount and Protect
With its weight and dimensions, the SBOX-2RF is one of the smallest and most lightweight TC & WC generators on the market. It can be easily mounted on most camcorders or photo cameras available.

Specifications

Display Graphical 1“ high, white LED display with adjustable brightness
Dimensions (h x w x d) 230 x 185 x 24 mm (9.0" x 7.3" x 0.9")
Weight (w/o batteries) approx. 760g (1.68 lb)
Mechanical construction CNC milled, anodized aluminium alloy and stiff wood
Powering 6x AA battery (alkaline or lithium) / 6x accu (NiMH, NiCd)
External powering 6 - 16 V DC
Current consumption approx. 30 - 1000 mA *
approx. 4 mA in stand-by mode (arms of the slate closed)
Battery life Up to 100 hours **
SMPTE TC formats 23,976 fps - 30 fps including DF and NDF (also 2x multiples: 23.976 fps - 60 fps supported)
Input TC sensitivity 0.2 - 10 V (p-p)
Frequency range 902 - 928 MHz (USA/Canada)
863 - 870 MHz (Europe)
920.6 - 923.4 MHz (Japan)
Number of channels 5
RF output power

10mW (10dBm)

Operating range up to 500m ***

* depends on the brightness of LED display
** with the lowest display brightness
*** within the line of sight

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£1,399.00 £1,899.00
Saving Of:  £500.00 (26%)
(£1,165.83 Exc. VAT)
+

Availability:  

1 in stock now  

1 in stock now

Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  PN-BNDL-WTCS
Manufacturer:  Betso

Betso
Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.

NEXT DAY DELIVERY

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.

FINANCE AVAILABLE

Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.30am - 5.30pm, to discuss these options and find out what's available to you.

We accept PayPal, Visa, Mastercard, Maestro, American Express

Pinknoise Bundle: Betso WTCS-1 Timecode Slate w/ SBOX2-RF Bundle

£1,399.00
× Site Currency
£0.00