PSC RF Multi SR Six Pack

PSC RF Multi SR Six Pack

The 6 pack rack unit for RF distribution and housing Lectro, WisyCom or Audio Ltd dual channel slot receivers.

Features:

• Provides Power Distribution
• Provides Low Noise RF Distribution
• DTV Band-pass limited
• Directly Interfaces to the PSC Alexis Mixer
• Can be used Independently in ENG bags or on Cart Based systems
• Compact and Light Weight

Variants:

• Single Band - 470-700Mhz  (mostly used outside of the USA and Canada
• Dual Band - 470-618Mhz and also covers 940-960 (Lectro Block 941)   This Dual Band unit covers the exact legal frequencies in the USA.
• Wider Band”   470-960Mhz…..covers it all.

The PSC RF Multi SR Six Pack contains two separate, active 1 x 4 RF splitters for use with up to three slot style receivers. This compact, rugged device was developed using the latest super low noise RF amplifiers.

Its two inputs are traditional BNC connectors for ease of use in interfacing with your external antennas. Each of the SMA outputs offers a typical isolation factor of 24 to 28dB between radio receivers. The PSC RF Multi SR Six Pack also has the ability to power external powered antennas or remote line amplifiers. There are two front panel mounted switches on the unit. One is marked “MAIN POWER” and this controls the over all power to the unit. The second switch is marked “ANT PWR” and this switch controls the power being sent to an external powered antenna or remote line amplifier. Both switches light up when in use. The entire unit is powered from any source of external DC power of 12Vdc @ approximately 170 to 210mA. On the left side of the unit there are six TA3M mini XLR output connectors. These provide audio output from the three slot receivers. In addition, there are two Chassis mounted SMA connectors on the left side panel of the unit. These offer two additional RF outputs that can be used to feed another PSC RF Multi SR Six Pack or PSC RF Multi SMA or other similar device.

The PSC RF Multi Six Pack is equipped with two mounting holes for use in mounting the Six Pack to Sound Devices 664 and 688. These two screw holes line up with the factory screws on the Sound Devices units. This allows you to mechanically secure the Six Pack to your Sound Devices 664 or 688. See photo to the right.

Optional Aaton Digital Interface

The Aaton Company of France has created a digital interface board for use inside the PSC RF Six Pack. This optional PCB can be factory installed by PSC in new units. It allows the PSC RF Six Pack to directly interface to the Aaton Cantar and Cantar Mini recorders. The interface option allows Cantar users to directly view information about their wireless on the Cantar screen. This information includes: RF Frequency Scanning, RF Receiver Frequency Selection, RF Signal Strength, Transmitter battery levels and more. The interface adds a USB connector to the right-hand side panel of the PSC RF Six Pack for use in connection to the Cantar and Cantar Mini recorders.

Please note that PSC is only installing this Aaton Interface as an option on new RF Six Packs. Existing PSC RF Six Packs (version 2 only) can be upgraded through participating Aaton Dealers world-wide.

Specifications

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Delivery Times

Delivery times are based on when the package(s) leaves our premises. Sometimes, due to stock restrictions or a non-completed order, delivery may take longer as there is a delay with couriers, which is unfortunately out of our hands. If your order is urgent, or details change, please do let us know.
For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 30 working days of receipt (14 to initiate the process), for a full refund or for an exchange for a different product from our range. Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may affect the level of refund you receive. For full details of our returns policy, please click here.