£108.00 - Balanced 3-Pin XLR Female to 3-Pin Lemo cable
- Designed to be used with the Audio Ltd radio mic systems
- Includes a pre-installed A-Filter which reduces RF interference by ~40db
- Added strain relief compared to the AC-BALXLR-2
|
|
£276.00 - Heavy-duty 3.5 mm headphone jack
- Rugged, spring steel belt clip
- User-friendly headphone volume control/power switch
- Monitor channel 1, channel 2 or a stereo mix of both channels
|
|
£326.40 - Audio Ltd 25 Pin D-Type Uni/Superslot adapter
- Designed for the A10-RX
- Includes mounting plate
|
|
£297.60 - Audio Ltd A-XLR stand-alone cable assembly adapter,
- XLR3M for audio & HRS 4p for DC, for use with A10-RX
- XLR and power cable adapter to convert the A10-RX-SL to A10-RX-XLR
- 2 x XLR3M for audio output. 1 x HRS for DC input + 1x HRS for DC feedthrough
|
|
£120.00 - Double audio output & external powering cable to power two AWDR-1(HR4) receivers
- 2 x 4-pin Hirose (HR4) balanced high level and external powering (10-18Vdc)
- With 4-pin Hirose, output to 2 x XLRs
- Length: 0.8 m
|
|
£144.00 - External powering with in-line voltage regulator and dc filtering
- To Line Feed Into Two Transmitters with External Powering Facility
- 2 XLR type female connectors w/ 2 TFA-5 connectors & 4-pin Hirose dc connector
- Cable Length: 0.8m
|
|
£78.00 - Audio output & external powering cable to power two AWDR-1(HR4) receivers
- 4-pin Hirose (HR4) balanced high level and external powering (10-18Vdc)
- With 4-pin Hirose, output to XLR
- Length: 0.8 m
|
|
£354.00 - Audio Ltd A10 Compatible
- 25 way Slot in
- 2x Power-Con (D-Taps)
- Audio Cables Supplied
|
|
£329.00 - Power-Con 35w/12v Regulated
- Audio Cable set included: 2x TA3 Female to XLR 3-Pin Right Angled
- 15 way D-Connector
- Compatible with Wisycom, Lectrosonics, Audio Limited, Sennheiser
|
|
£329.00 - Power-Con 35w/12v Regulated
- Audio Cable set included: 2x TA3 Female to XLR 3-Pin Right Angled
- 25 way D-Connector
- Compatible with Wisycom, Lectrosonics, Audio Limited
|
|
£12.00 - This bag made of durable neoprene protects your body-pack transmitters
- It has a feedthrough for the transmitter belt clip
- Provides direct access to the inputs for the antenna and instrument cable
- It can be closed either by Velcro fastener or using the elastic Velcro strap
|
|
£120.00 - Replaces the batteries and door on the LR receiver
- Allows the unit to be powered from an external DC source
- Supplied in a kit including mounting screws
|
|
£45.00 - Accessory shoe to allowing mounting on DSLR cameras
- Supplied with all the parts needed to mount on a camera or DSLR
- Suitable for the Lectrosonics LR or M2R
|
|
£36.00 - Sewn leather pouch for the IFBR1a Receiver
- Features a rotating belt clip and press stud fastener
- With built-in strap to secure the receiver
|
|
£288.00 - Battery sled adapter for SR receivers
- Accepts L and M type rechargable batteries
- Mounts above or below the SR receiver
- Select orientation from drop down menu
|
|
£735.00 - Up to six VRT2 modules may be installed per each 1RU Venue 2 receiver frame.
- Each module supports up to 3072 tunable frequencies across a 75 MHz range
- Matching the tuning ranges of SSM, LT and LMb "large bandwidth" transmitters
- VRT2 modules incorporate Lectrosonics’ new IQ dynamic tracking filters
|
|
£54.00 - Electronically balanced variable high level output, Hirose to XLR male connector
- Audio balanced high level output cable 0.7 metres long
- Hirose to XLR male connector
- For Explorer SDR only
|
|
£95.00 - Audio balanced high level output cable with RX powering
- Hirose female to XLR male and Hirose male connector
- In-line regulator 9v to 16v input
- For Explorer Series SDR only
|
|
£15.00 - Micron Explorer Belt Clips
- Spare belt clips for the Micron Explorer transmitter and receiver series.
|
|
£60.00 - Hot Shoe mount for Pocket TX and SDR Receivers
- Fits Micron 700 & Explorer 100 Series
- Keeps antennas high and clear of the camera for best wireless range
- 1/4 inch tripod thread socket. Easy to fit and remove
|
|
£180.00 - Double Audio high level output cable with RX powering
- Hirose females to XLR males and Hirose male connector
- In-line regulator 9v to 16v input
- For Two Explorer Series SDRs only
|
|
£72.00 - Pinknoise Custom 5-pin Lemo to 3-pin Lemo
- Timecode IN Cable for Audio Ltd A10-TX
- High quality Pinknoise custom timecode cable
- 5-PIN LEMO to 3-PIN LEMO Timecode cable, 40.6 cm
|
|
£54.00 - Pinknoise Custom BNC to 3-Pin Lemo Timecode IN Cable
- Designed for the Audio Ltd. A10-TX
- Timecode cable, BNC to LEMO 3-pin
- To connect external timecode sources to the A10-TX
|
|
£18.00 - Shoe mount adapter for the EW series camera mountable receivers
- The mount allows users to attach the receiver to the accessory shoe
- Connects to the shoe of any camera, providing a secure mount
|
|
£88.00 - Sennheiser GA 6042-15
- 15 Pin Superslot Adapter for the EK 6042 Reciever
- Compatible with the Sound Devices SL-6
- Comes with Screws, Bottom plate and Adapter
|
|
£88.00 - Sennheiser GA 6042-25
- 25 Pin Superslot Adapter for the EK 6042 Reciever
- Compatible with the Sound Devices SL-6
- Comes with Screws, Bottom plate and Adapter
|
|
£1,680.00 - Accepts three dual-channel slot-in wireless receivers for a total of six channels
- Compatible with existing slot-in and new SuperSlot wireless receivers
- Ability to set SuperSlot-compatible receiver frequency and power on/off from the 688
- Ability to monitor SuperSlot-compatible receiver battery, audio and RF levels from the 688
|
|
£255.00 - Stand-Alone Rear-Panel For The MCR42S Receiver
- 2 mini XLR-3pin male output
- 1 locking mini jack Stereo Plug 3.5mm
- 1 Hirose connector for external power
|
|
£39.00 - Shoe mount adapter for the MPR30, MPR50 and MPR52 mountable receivers
- The mount allows users to attach the receiver to the accessory shoe
- Connects to the shoe of any camera, providing a secure mount
- Can also screw onto any 1/4" to 3/8" Camera Screw for tripods or grips
|
|
£125.00 - Compatible with the following units
- SuperSlot mixers (i.e. Sound Devices 668/SL-6, Six Pack of PSC)
- Unislot (Ikegami, Panasonic cameras)
- Adapter (Ambient VSLOT)
|
_1.jpg)
_1.jpg)
