Clearance

• 5 Different connectors available
• Easy to use and swap out Micon system
• Made by Active Audio / Da Cappo

• Replacement hot shoe suspension mount for the CB-850 Sniper Microphone
• A sturdy mount with elastic rubber to ensure reduction in movement noise
• While also providing a tight grip onto the microphone.

• Designed for use with DSLR and other video cameras
• Provides dramatically better sound quality than the camera's internal microphone
• Selectable line-cardioid mono or mid-side stereo modes to provide flexibility
• Handles loud sound sources without distortion

• Equipped with a USB output, the AT2020USB+ is designed for digitally capturing music or any acoustic audio source using your favorite recording software.
• High quality A/D converter with 16 bit, 44.1/48 kHz sampling rate for superb audio
• Headphone jack with volume control allows you to monitor the microphone signal with no delay

• Outstanding performance & rugged construction, ideal for studio & live applications
• High SPL handling and wide dynamic range
• Flat, extended frequency response
• Switchable 80 Hz hi-pass filter and 10 dB pad

• Handheld dynamic microphone with USB digital output and XLR analogue output
• Built-in headphone jack lets you monitor directly from the microphone
• Dial on the bottom of the microphone allows you to easily adjust headphone
• High-quality AD converter with 16 Bit, 44.1/48 kHz sampling rate

Ideal for podcasting, home studio recording, field recording, and voiceover use, the ATR2500x-USB plugs into your computer or other device

The Visor Hat, Visor Cap and Visor Cap Wide all have detachable sanitary screens so you can make ready quickly in the case of any contact with talent or other departments.

• Solid Metal Body Construction
• Rugged Plastic Belt Clip
• Adapts 48v to 3v PIP (Plug In Power)
• Works with standard 3.5mm microphones

• Microdot Adapters for Deity W.Lav Microphones
• For use with various inputs jacks
• Available for 3.5mm / TA4F / TA5F
• Select drop down below for variants

• For mobile devices & cameras with the smart adapting 3.5mm jack
• Pre-polarized condenser capsule with omnidirectional polar pattern
• Complete bundled kit with wind protection and rugged carry case
• High quality sound performance with a small form factor

• Connect your 3.5mm video microphones into a XLR based camera or audio recorder.
• Adapts the 24/48V phantom power supplied by the XLR input it’s plugged into and converts it to a 3-5V Plug-In Power signal
• The XLR connector is only a little over half the length of an average XLR connector in length
• Built in 15” coiled 3.5mm cable