Shure SM7B Studio Kit Bundle

Shure SM7B Studio Kit Bundle
Shure SM7B Studio Kit BundleShure SM7B Studio Kit BundleShure SM7B Studio Kit Bundle
Shure SM7B Studio Kit BundleShure SM7B Studio Kit Bundle

Shure SM7B Studio Kit Bundle

This bundle includes:

  • Shure SM7B Dynamic Studio Microphone
  • Gravity MST01B Tabale-Top Microphone Stand
  • Pinknoise Custom Van Damme XLR to XLR 3 Pin
  • Triton Audio FetHead Preamp

Shure SM7B Dynamic Studio Microphone

The Shure SM7B is a warm, detailed sounding vocal microphone that is ideal for close-range vocal applications such as podcast recording radio broadcasting, TV talkovers, and studio lead vocal recording.

As used on Podcasts and Media Platforms around the world, the SM7B has established itself as a true industry standard. For tried-and-tested results when capturing vocals - look no further than Shure!

Reliable and Dependable Audio Capture. Built for the Studio.

Courtesy of a wide-range frequency response, bass roll off and mid-range control, and internal air suspension shock isolation, the Shure SM7B has established itself as the go-to microphone for Broadcast Studios around the world. As well as spoken word, vocal song performance and interviews, the SM7B also provides a unique response for guitar cabs and amplifiers, subsequently used on successful recordings over the past 2 decades.

Shure SM Series Microphones are equal to the demands of high-energy performance, proven time and time again through decades of rigorous use by performers and engineers of all experience levels.

Noise-Free Vocal Clarity

It specifically shields against electromagnetic hum caused by studio monitors and speakers, so it delivers a noise-free signal for professional users who demand the highest quality without compromise. The included internal "air suspension" shock isolation virtually eliminates mechanical noise transmission too.

Efficient Pop Filter

The Shure SM7B features a standard high-density windscreen and an additional A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals.

Improved Bracket Design

The updated mic chassis features a hassle-free cable management system and upgraded bracket design to offer greater stability. This also allows for easy rigging into a studio environment via XLR connectivity. The SM7B bracket is compatible with a wide range of microphone stands, arms and clamps.


  • Flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speech
  • Bass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting
  • Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors
  • Internal "air suspension" shock isolation virtually eliminates mechanical noise transmission
  • Highly effective pop filter eliminates need for any add-on protection against explosive breath sounds, even for close-up vocals or narration
  • Now shipping with the A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals
  • Yoke mounting with captive stand nut for easy mounting and dismounting provides precise control of microphone position
  • Classic cardioid polar pattern, uniform with frequency and symmetrical about axis, to provide maximum rejection and minimum coloration of off-axis sound
  • Rugged construction and excellent cartridge protection for outstanding reliability

Gravity MST01B Table-Top Microphone Stand

This table top microphone stand consists of a heavy yet compact die-cast base and a steel tube. Thick rubber covering the whole circumference of the base isolates it from the table and helps to minimise unwanted noise.


  • Sturdy construction
  • Heavy die-cast base
  • Rubber base for sonic isolation

Pinknoise Custom Van Damme XLR to XLR 3pin

These cables are designed for professional audio applications. We use high quality Van Damme cable with Neutrik connectors fitted with a standard XLR 3-pin connection.

Triton Audio Fethead Preamp for Ribbon and Dynamic Microphones

FetHead is an ultra-low noise, high quality, in-line microphone preamplifier. It provides improved sound for ribbon and dynamic microphones. Small, compact, but, powerful, Fethead utilizes tried and true FET technology to deliver up to 27dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!


Your Fethead will latch straight onto any XLR equipped microphone, or anywhere else in the signal path between microphone and preamp/mixer.  The electronics are housed in a robust metal chassis with a balanced female XLR input and a balanced male XLR output, rugged enough for use at home, in the studio or on tour.

Which microphones benefit

We noticed an improvement on all tested microphones. A Shure SM57 for instance, sounds more responsive over a broader frequency range. When mated with a high-end dynamic microphone like a Sennheiser MD441, or Shure SM7 our FetHead really shines. 

Ribbon microphones benefit greatly too because of a much better impedance match. Our Fethead lessens the load on the microphone, giving it better transient response characteristics. FetHeads low noise signal amplification also extends the usable range of a ribbon microphone, making it more suitable to capture softer sound sources.

Protects the microphone

Some older ribbon microphones do not tolerate phantom power. Fethead uses phantom power to power its circuitry, but doesn’t pass phantom power to the microphone, so rest assured your ribbon mics are safe.


  • For ribbon and dynamic microphones
  • Low noise Class A FET amplifier
  • 27 dB amplification (@ 3000 Ω Load)
  • Balanced XLR input/output
  • Frequency response 10hz-100khz (+/- 1dB)
  • Z-in 22 kΩ
  • Circuit is powered with 24-48V phantom power


Shure SM7b Dynamic Mic

Weight 765 g
Height x Width x Depth: 198.7 × 117.0 × 96.0 mm
Frequency Response: 50 Hz – 20 kHz
Frequency Response: Adjustable
Sensitivity: -59.00 dBV/Pa – 1.12 mV/Pa
Transducer Type: Dynamic
Polar Pattern: Cardioid
Switchable low cut: Yes
Connectors: 3 Pin XLR
Attenuator: No
Interchangeable Capsule: No
Main Functionality: Recording
Headphone Output: No
Cartridge: Fixed
Frequency Response Curve Image:

Shure Studio Microphone Frequency Response Curve Image

Gravity MST01B Table-Top Microphone Stand

Product type Stands and Tripods
Type Microphone Stands
Tubing material Steel
Tubing colour Black
Tubing surface Powder coated
Max. height 200 mm
Base material Cast iron
Base diameter 130 mm
Boom no
Weight 1,26 kg

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-10 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the package(s) leaves our premises. Sometimes, due to stock restrictions or a non-completed order, delivery may take longer as there is a delay with couriers, which is unfortunately out of our hands. If your order is urgent, or details change, please do let us know.
For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 30 working days of receipt (14 to initiate the process), for a full refund or for an exchange for a different product from our range. Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may affect the level of refund you receive. For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£720.00 £796.00
Saving Of:  £76.00 (10%)
(£600.00 Exc. VAT)


Sold out - More soon  

Sold out - More soon

Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Manufacturer:  Shure

Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.


We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.


Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.00am - 5.00pm, to discuss these options and find out what's available to you.

We accept Klarna, PayPal, Maestro, Visa, Mastercard & American Express

Shure SM7B Studio Kit Bundle

× Site Currency