£135.00 - Specially designed rubber base for super easy and secure mounting
- Base windshield made from highly efficient mesh
- Slip-on fur made from Bubblebee industries best imitation fur
- Quick drying of the fur if it gets wet.
|
|
£42.00 - Compatible with the Rode NTG-1, NTG-2, NTG-4 and NTG-4+ microphones
- Suitable for mics with a maximum slot length of 160.5mm and diameter of 21-22.5mm
- An easy to use performance windshield for shotgun microphones
- Designed to reduce wind noise when recording in adverse environmental conditions
|
|
£42.00 - An easy to use high-performance windshield for shotgun mics
- Suitable for the RØDE NTG-3 and mics with a length of 186.5mm and a diameter of 19-20mm
- Designed to reduce wind noise when recording in adverse environmental conditions
- Combines an open-cell foam surround with an outer layer of acoustically transparent fur
|
|
£144.00 - Designed specifically for Scheops CMIT5U Microphone
- Aerodynamic and Durable
- Provides superior performance and durability
- Ideal for boom-pole use
|
|
£144.00 - Designed to fit the Schoeps CMIT
- Also suitable for other shotgun microphones with 19 and 25mm diameter
- Ideal for boom-pole use
- Comes with a shoe adapter for easy attachment to a camera
|
|
£69.00 - Compatible with the Sanken CS-M1 microphone
- Fast, tough and always dependable
- Advanced materials, adhesives and assembly techniques
- Extremely tough and provides excellent wind protection
|
|
£117.00 - Compatible with the Sanken CS-M1 microphone
- Includes windshield, heavy shock mount and hot-shoe adaptor
- Advanced materials, adhesives and assembly techniques
- Extremely tough and provides excellent wind protection
|
|
£132.00 - Windshield, suspension and handle kit
- Up to -25dB wind noise attenuation
- Suitable for microphones with interference tubes between 5cm and 15cm long
- Suitable for microphones with a diameter between 19mm and 22mm
|
|
£90.00 - Significantly increased performance compared to conventional foam windscreens
- Allows for rapid attachment and removal. Durable and easily maintained
- Incredibly lightweight – only approximately 17g
- Acoustically transparent open cell foam and soft felt cover construction
|
|
£57.00 - Significantly increased performance compared to conventional foam windscreens
- Allows for rapid attachment and removal. Durable and easily maintained
- Incredibly lightweight – only approximately 17g
- Includes Windjammer for -40 db wind noise attenuation
|
|
£32.40 - Significantly increased performance compared to conventional foam windscreens
- Allows for rapid attachment and removal. Durable and easily maintained
- Incredibly lightweight – only approximately 17g
- Acoustically transparent open cell foam and soft felt cover construction
|
|
£156.00 - Simple and cost-effective windshield design that has stood the test of time.
- Integral fur cover windshield for excellent wind noise reduction.
- Thin-walled cavity design for acoustic transparency across the spectrum.
- Slip-on windshield in a range of sizes to fit almost any location microphone.
|
|
£69.00 - A slip-on open-cell foam, with integral fur cover
- Cost effective windshield which is tough enough to endure ENG and location recording
- Simple to use standard in world wide in TV
- High quality windshielding and shockmounting for an affordable prices
|
|
£144.00 - Fur classic softie - front end wind protection
- Pistol grip with duo lyre suspension
- XLR 40cm lead
- Ideal for outdoor interviews
|
|
£84.00 - A slip-on open-cell foam, with short fur cover
- Cost effective windshield which is tough enough to endure ENG and location recording
- Simple to use standard in world wide in TV
- Select from drop down below for different sizes
|
|
£48.00 - For use with the DPA 4017, Sanken CS-1e, Sennheiser MKH 8060 & more
- Designed specifically for the INV-Lite shock-mount
- For use with shorter, lighter shotgun mics for interior booming (19mm)
- Provides more protection against plosives and windnoise than a foam equivalent
|
|
£114.00 - For use with the DPA 4017, Sanken CS-1e, Sennheiser MKH 8060 & more
- Designed specifically for the INV-Lite shock-mount
- For use with shorter, lighter shotgun mics for interior booming (19mm)
- Provides more protection against plosives and windnoise than a foam equivalent
|
|
£48.00 - For use with the Schoeps Mini CMIT and similarly sized 21mm microphones
- Designed specifically for the INV-Lite shock-mount
- For use with shorter, lighter shotgun mics for interior booming (19mm)
- Provides more protection against plosives and windnoise than a foam equivalent
|
|
£114.00 - For use with the Schoeps Mini CMIT and similarly sized 21mm microphones
- Designed specifically for the INV-Lite shock-mount
- For use with shorter, lighter shotgun mics for interior booming (19mm)
- Provides more protection against plosives and windnoise than a foam equivalent
|
|
£90.00 - Greatly improved wind noise reduction compared to conventional “soft" windshields
- Superb performance at extreme low frequencies (where wind noise is worst)
- A rough-service windshield, robust enough for the most challenging situations
- Maintains excellent acoustic transparency in almost all situations
|
_1.jpg)
-Perfect-for-Sanken-CS-M1-1.jpg)
-Perfect-for-Sanken-CS-M1-1.jpg)
_1.jpg)
