Sound Devices 833 Portable Mixer-Recorder W/ Orca OR-30

Sound Devices 833 Portable Mixer-Recorder W/ Orca OR-30
Sound Devices 833 Portable Mixer-Recorder W/ Orca OR-30Sound Devices 833 Portable Mixer-Recorder W/ Orca OR-30Sound Devices 833 Portable Mixer-Recorder W/ Orca OR-30

Sound Devices 833 Portable Mixer-Recorder W/ Orca OR-30

Bundle Includes:

  • Sound Devices 833 Portable Compact Mixer-Recorder
  • Orca OR-30 Sound Bag

Sound Devices 833 Portable Compact Mixer-Recorder

The 833 is the professional’s tool for mobile and small productions. Like the popular Sound Devices 633, the 833 is small, lightweight, and compact. A tactile interface with dedicated faders, trim knobs, and PFL switches makes this mixer-recorder ideal for run-and-gun bag use.

The 833 has 6 mic/line preamplifiers, 8 channels, 12 tracks, 6 analog outputs, and ultra-accurate timecode. Many features have carried over from the premium Sound Devices’ Scorpio, such as Sound Devices’ new preamplifier design, 2 SD card slots, dual L-Mount battery charging and powering, and an internal 256 GB SSD.

Additionally, the 833 shares the same processing architecture and multiple FPGAs as the Scorpio. This enables the 833 to be fully routable, and any physical input can be routed to any track. The 833 features both digital and analog inputs and outputs, and has multiple powering options, so it will fit effortlessly into your existing kit.

A built-in three band EQ may be set to either pre- or post-fade for each channel to tackle any problems directly on-set. Enable Dugan Automixing to automatically attenuate unused microphones in multi-microphone applications. Up to 8 channels can be automixed at a time, and two separate groups can be mixed simultaneously.

Dedicated coms and slate allows for professional bi-directional communication with other crew members. Send customized mixes to the camera or crew with multiple mix buses. With the ability to record to three media simultaneously, you can turn over SD cards to production at the end of the day while keeping a backup on the internal 256 GB SSD.

The 833 may be controlled via the companion Android app, SD-Remote, which features transport controls, metering,< and sound reports. For an instant mobile workstation, choose from one of several supported USB control surfaces for remote fader and transport control.

The 833 is the professional’s tool for mobile and small productions. Like the popular Sound Devices 633, the 833 is small, lightweight, and compact. A tactile interface with dedicated faders, trim knobs, and PFL switches makes this mixer-recorder ideal for run-and-gun bag use.

The 833 has 6 mic/line preamplifiers, 8 channels, 12 tracks, 6 analog outputs, and ultra-accurate timecode. Many features have carried over from the premium Sound Devices’ Scorpio, such as Sound Devices’ new preamplifier design, 2 SD card slots, dual L-Mount battery charging and powering, and an internal 256 GB SSD.

Additionally, the 833 shares the same processing architecture and multiple FPGAs as the Scorpio. This enables the 833 to be fully routable, and any physical input can be routed to any track. The 833 features both digital and analog inputs and outputs, and has multiple powering options, so it will fit effortlessly into your existing kit.

A built-in three band EQ may be set to either pre- or post-fade for each channel to tackle any problems directly on-set. Enable Dugan Automixing to automatically attenuate unused microphones in multi-microphone applications. Up to 8 channels can be automixed at a time, and two separate groups can be mixed simultaneously.

Dedicated coms and slate allows for professional bi-directional communication with other crew members. Send customized mixes to the camera or crew with multiple mix buses. With the ability to record to three media simultaneously, you can turn over SD cards to production at the end of the day while keeping a backup on the internal 256 GB SSD.

The 833 may be controlled via the companion Android app, SD-Remote, which features transport controls, metering,< and sound reports. For an instant mobile workstation, choose from one of several supported USB control surfaces for remote fader and transport control.


Orca OR-30 Sound Bag

Orca Audio Bag / Mixer bag  are the first in the world to offer maximum protection for the sensitive gear inside, thanks to their durable external aluminum frame, internal honeycomb frame, and layers of foam and EVA. They are all meticulously designed by photographers and audio experts to carry, protect and enable operation of all audio mixers, in any location. The Orca Audio Bags come in 3 different sizes to hold most of the audio mixers in the market.

Special features:

  • The world’s first audio bag with an aluminium frame, and the first that provides access to the gear inside from 6 directions.
  • “ORCA Lift”, the first solution in the world to help audio operators position the mixer from any size to any level.
  • Special sliding system to secure any mixer inside the bag.
  • Top Clear TPU for easy viewing.
  • Unique battery pocket with extra rubber battery fittings.
  • Detachable carrying handles & shoulder strap.
  • Two giant pockets for storing any audio accessories.
  • Four external detachable pouches and 9 rubber bands to hold any size of wireless system
  • Front bungee cords to hold boom pole or cables.
  • Can be connected to the Orca Harness, to ease the load off user.
  • Inside lining made from bright blue brushed polyester for easy viewing of equipment.

Specifications

Specifications for the Sound devices 833

Freq. REsponse 10 Hz to 80 kHz ± 0.5 dB (192 kHz sample rate, re 1 kHz)
THD + Noise 0.005% max (1 kHz, 22 Hz–22 kHz BW, trim @20, fader @ 0, -10 dBu in)
Equivalent Input Noise -131 dBV (-129 dBu) max
(A-weighting, 76 dB gain, 150 ohm source impedance)
Processing Engine Highly extensible, full FPGA-based audio processing, 3 FPGAs
Six-way ARM multiprocessor system
64-bit audio processing precision
Inputs

Mic/Line inputs 6 total, all fully featured; 3 on full-size XLR, 3 on
TA3

Mic-level inputs: (XLR, TA3): Class-A, discrete differential long-tail
pair, 4k ohm input impedance
Line-level inputs: (XLR, TA3,): active-balanced, 4k ohm input
impedance
48V phantom: full 10mA to all 6 inputs simultaneously
AES3 or AES42 available on XLR input 1
AES42: +10 V, 250 mA available, mode-1, auto-ASRC
Aux (3.5 mm/10-pin): unbalanced 2-channel, 4k ohm input
impedance
Com Rtn (TA3, 3.5mm) balanced, 1-channel, 8k ohm input
impedance
External Slate Mic (TA5): balanced, 8k ohm input impedance,
menu-selectable 12 V phantom

 

Maximum Input Level Mic: +8 dBu (2.0 Vrms)
Line: +28 dBu (19.5 Vrms)
Rtn A, B, C: +18 dBu (6.2 Vrms)
Com Rtn 1, 2: +24 dBu (12.3 Vrms) • External Slate Mic: +12 dBu (3.2 Vrms)
High-Pass Filters Adjustable 10 Hz to 320 Hz, 18 dB/oct. 1st stage analog (beforepreamp), 2nd stage digital.
Limiters Limiters available at all channels, buses, headphones, for all sample rates
Analog first stage, all subsequent stages digital
Attack time: 1 ms • Release time: adjustable, 50 ms to 1000 ms • Threshold: adjustable, -2 dBFS to -12 dBFS
Selectable ratio: inf:1, 20:1, 18:1, 16:1, 14:1, 12:1, 10:1
Delay Channel Adjustable 0-50 ms Output Adjustable 0-500 ms
Maximum Gain Trim stage (mic input): 76 dB
Trim stage (line input): 50 dB
Fader stage: 16 dB
Bus stage: 16 dB
Headphone stage: 20 dB
Mic-to-Line: 108 dB
Mic-to-Headphone: 112 dB
Outputs XLR (L, R) active-balanced, 250/3.2k/120 ohms (mic/-10/line)
TA3 (X1/X2) active-balanced, 250/3.2k/120 ohms (mic/-10/line)
3.5mm (X3/X4): unbalanced, stereo, 1.8k ohms
Headphone Outputs 1⁄4”, 3.5 mm
TA5 (along with mic input pins) for single connection to headset + mic
High output, 4 ohm output impedance, 400 mW + 400 mW at each connector, all individually driven
Compatible with headphones of any impedance
Maximum Output Level (all into 10k load) Line: +20 dBu (7.8 Vrms)
“-10”: +6 dBu (1.5 Vrms)
Mic: -20 dBu (0.078 Vrms)
X3/X4 Out: +6 dBu (1.5 Vrms)
Headphone outputs (1⁄4”, TA-5): +14 dBu (4.0 Vrms)
A/D converters 32-bit, 120 dB, A-weighted dynamic range typical
Sampling rates 44.1 kHz, 47.952 kHz, 48 kHz, 48.048 kHz, 88.2 kHz,96 kHz, 192 kHz
Digital Outputs AES3 transformer-balanced, in pairs; 1-2 (XLR-L), 3-4 (XLR-R), 110ohm, 2 V p-p, AES and S/PDIF compatible
Recording Internal 256 GB SSD • Two removable SD Cards
Simultaneous recording to internal SSD and the two SD cards
exFAT formatting
12 tracks (8 iso channels, 4 buses)
Broadcast WAV monophonic and polyphonic file format • 64-bit WAV (RF64) monophonic and polyphonic; support for files > 4 GB
Automixing Dugan Automixing up to 8 channels on left and right mix bus
USB USB-C (USB 3.1 type 1) for file transfer of internal SSD, both SD Cards
USB-A host for keyboard, external controller, external USB hubs
Timecode and Sync Modes Supported: Off, Rec Run, Free Run, 24h Run, External,including External Auto-Record and Continuous modes.
Frame Rates: 23.98, 24, 25, 29.97 DF, 29.97 ND, 30 DF, 30 ND
Sample/Timecode Accuracy: 0.1 ppm (0.25 frames per 24 hours)
Timecode Input: 20k ohm impedance, 0.3 V - 3.0 V p-p (–17 dBu - +3 dBu)
Timecode Output: 75 ohm impedance, 5 V p-p (+12 dBu)
Word Clock Input: 10k/75 ohm selectable impedance,1-5 V p-p input sensitivity
Word Clock Output: 75 ohm impedance, 5 V p-p output, at SR
Remote Control USB MIDI Control - 3rd party fader controllers • SD-Remote Android app
USB Keyboard
External Timecode Record Trigger
LCD 320x240, Transflective, excellent sunlight visibility
Larger touchscreen display available via USB-connected SD-Remote app
Power External: 10-18 V input on locking TA4 connectors, pin-4 = (+), pin-1 = (-)
Intelligent power-down of unused mic preamps and other internal circuits
Environmental Operating: -20° C to 60° C, 0 to 90% relative humidity (non-condensing)
Storage: -40° C to 85° C

 

Dimensions(H x W x D) 5.1 cm x 22 cm x 17 cm; (2.0 in. x 8.7 in. x 6. in)
Weight 2.75 lbs (unpackaged, without batteries) 1.25 kg (unpackaged, without batteries)

Specifications for Orca-30

Internal cm / inch L: 26cm / 10.2"
W: 12cm / 4.72"
H: 17.5cm / 6.89"
External cm / inch L: 31cm / 12.2"
W: 26cm / 10,23"
H: 19.5cm / 7.68"
Weight kg / lb 1.78kg / 3.91lb

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£4,248.00 £4,474.00
Saving Of:  £226.00 (5%)
(£3,540.00 Exc. VAT)
+

Availability:  

3 in stock now  

3 in stock now

Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  PN-BNDL-833-OR30
Manufacturer:  Sound Devices

Sound Devices
Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.

NEXT DAY DELIVERY

We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.

FINANCE AVAILABLE

Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.30am - 5.30pm, to discuss these options and find out what's available to you.

We accept PayPal, Visa, Mastercard, Maestro, American Express

Sound Devices 833 Portable Mixer-Recorder W/ Orca OR-30

£4,248.00
CUSTOMERS ALSO BOUGHT
Orca OR-30 Sound Bag for 633 / 833
Orca OR-30 Sound Bag for 633 / 833
  • Works with Sound Devices 633 / 833, Zacom MAX and similar
  • An aluminium frame provides access to the inside from 6 directions
  • Detachable carrying handles & shoulder strap
  • Two giant pockets for storing any audio accessories
15 in stock now  15 in stock now
£299.00  £375.00
Sound Devices 833 Compact Portable Mixer / Recorder
Sound Devices 833 Compact Portable Mixer / Recorder
  • 6 mic/line preamplifiers / 8 channels / 12 tracks / 2 SD card slots / 256GB Internal SSD
  • Shares the same processing architecture and multiple FPGAs as the Scorpio
  • A built-in three band EQ may be set to either pre- or post-fade for each channel
  • May be controlled via the companion Android app, SD-Remote
3 in stock now  3 in stock now
£4,194.00  £4,308.00
1 x Pinknoise Custom TA3 to XLR 40cm (Male) for Sound Devices
1 x Pinknoise Custom TA3 to XLR 40cm (Male) for Sound Devices
  • High quality Pinknoise Custom cable
  • Made with Rean TA3 female plug to Neutrik XLR 3 pin male plug
  • Standard length is 40cm
  • These cables are colour coded for your convenience
Only 35 in stock  Only 35 in stock
£16.50  
1 x Pinknoise Custom TA3F to XLR 40cm (Female) for Sound Devices
1 x Pinknoise Custom TA3F to XLR 40cm (Female) for Sound Devices
  • High quality Pinknoise Custom cable
  • Made with Rean TA3 female plug to Neutrik XLR 3 pin female plug
  • Standard length is 40cm
  • These cables are colour coded for your convenience
Only 52 in stock  Only 52 in stock
£16.50  
DPA DAD Microdot Adapters
DPA DAD Microdot Adapters
  • DPA Microphones have created a wide range of adapters to suit any of your lavalier needs!
  • Featuring MicroDot to a variety of connectors on most popular radio mic systems.
  • See the list below to help you find the right adapter for your system!
Only 5 in stock  Only 5 in stock
£84.00  
Ambient Lockit SYNC (+TC) Output Cable to RED SYNC
Ambient Lockit SYNC (+TC) Output Cable to RED SYNC
  • For RED Cameras or Expanders with 4-pin SYNC port
  • Supplies timecode, genlock with a single connection
  • 5-pin push-pull lemo connection
  • 4-pin push-pull lemo connection
4 in stock now  4 in stock now
£79.00  £87.00
× Site Currency
£0.00