Sound Devices 888 Portable Mixer-Recorder W/ Orca OR-32 Bundle

Sound Devices 888 Portable Mixer-Recorder W/ Orca OR-32 Bundle
Sound Devices 888 Portable Mixer-Recorder W/ Orca OR-32 BundleSound Devices 888 Portable Mixer-Recorder W/ Orca OR-32 BundleSound Devices 888 Portable Mixer-Recorder W/ Orca OR-32 Bundle

Sound Devices 888 Portable Mixer-Recorder W/ Orca OR-32 Bundle

Bundle Includes:

  • Sound Devices 888 Portable Compact Mixer-Recorder
  • Orca OR-32

Sound Devices 888 Portable Mixer / Recorder

Features

  • 8 ultra low-noise, all-new microphone preamplifiers
  • 16 channels, 10 buses, 20 tracks
  • Ultra-accurate timecode
  • 256GB internal SSD, 2 SD card slots
  • USB-A and C ports for SD-Remote app, linear fader control via MCU, keyboad, and file transfer
  • Dugan Automixing for up to 16 channels;

Meet the 888 - the portable mixer-recorder that’s compact and light enough to use in a bag, yet has the high channel count and power required for mobile cart productions. The 888 is the smallest portable mixer-recorder on the market that offers Dante for sending and receiving audio over Ethernet. With 8 ultra low-noise, 8-Series microphone preamplifiers, 16 channels, 20 tracks, multiple powering methods, and support for multiple USB control surfaces, the 888 can be easily tailored to your workflow. An updated processing architecture and multiple FPGAs enables the 888 to be fully routable: any physical input may be sent to any track, bus, or output.

Many features have carried over from the premium Sound Devices’ Scorpio, such as the new 8-Series preamplifier design, 2 SD card slots, internal 256GB SSD, and dual L-Mount battery charging and powering. Alternatively, power your 888 using a smart battery, NP-1 battery, or an in-line power supply via its TA4 DC input. The ultra-accurate, fully-featured timecode generator contains its own battery to hold timecode for up to four hours after power off.

Dedicated coms and slate allows for professional bi-directional communication with other crew members. Send customized mixes to the camera or crew with multiple mix buses. With the ability to record to three media simultaneously, you can turn over an SD card to production, AAC files for transcription, and keep a backup on the internal 256 GB SSD.

A built-in three band EQ may be set to either pre- or post-fade for each channel to tackle any problems directly on-set. Enable Dugan Automixing or MixAssist to automatically attenuate unused microphones in multi-microphone applications. Up to 16 channels can be automixed at a time.

Get the perfect fit on your cart with one of several supported USB control surfaces for remote fader and transport control. Download the companion Android app, SD-Remote, to access to transport controls, metering, and sound reports on a large touch screen.

Elevate your kit with the 888 Portable Production Mixer-Recorder.


Orca OR-32 Audio Bag

Orca Audio Bag / Mixer bag are the first in the world to offer maximum protection for the sensitive gear inside, thanks to their durable external aluminum frame, internal honeycomb frame, and layers of foam and EVA. They are all meticulously designed by photographers and audio experts to carry, protect and enable operation of all audio mixers, in any location. The Orca Audio Bags come in 3 different sizes to hold most of the audio mixers in the market.

Special features:

  • The world’s first audio bag with an aluminum frame, and the first that provides access to the gear inside from 6 directions.
  • “ORCA Lift”, the first solution in the world to help audio operators position the mixer from any size to any level.
  • Special sliding system to secure any mixer inside the bag.
  • Top Clear TPU for easy viewing.
  • Unique battery pocket with extra rubber battery fittings.
  • Detachable carrying handles & shoulder strap.
  • Two giant pockets for storing any audio accessories.
  • Four external detachable pouches and 9 rubber bands to hold any size of wireless system
  • Front bungee cords to hold boom pole or cables.
  • Can be connected to the Orca Harness, to ease the load off user.
  • Inside lining made from bright blue brushed polyester for easy viewing of equipment.

Specifications

Freq. Response 10 Hz to 80 kHz ± 0.5 dB (192 kHz sample rate, re 1 kHz)
THD + Noise 0.005% max (1 kHz, 22 Hz–22 kHz BW, trim @20, fader @ 0, -10 dBu in)
Equivalent Input Noise -131 dBV (-129 dBu) max (A-weighting, 76 dB gain, 150 ohm source impedance)
Processing Engine Highly extensible, full FPGA-based audio processing, 3 FPGAs
Six-way ARM multiprocessor system
64-bit audio processing precision
Audio Over Ethernet Dante, 16 channels in, 16 channels out
AES67 compatible
1 Gb/s Ethernet, 1 port, transformer-balanced
Inputs Mic/Line inputs: 8 total, all fully featured; 4 on full-size XLR, 4 on TA3
Mic-level inputs: (XLR, TA3): Class-A, discrete differential long-tail pair, 4k ohm input impedance
Line-level inputs: (XLR, TA3): active-balanced, 4k ohm input impedance 
AES3 or AES42 available on XLR input 1
AES42: +10 V, 250 mA available, type-1, auto-ASRC
Rtn A, B (TA3/3.5 mm): unbalanced 2-channel, 4k ohm input impedance
Com Rtn (TA3) balanced, 1-channel, 8k ohm input impedance
External Slate Mic (TA5): balanced, 8k ohm input impedance, menu-selectable 12 V phantom 
Maximum Input Level Mic: +8 dBu (2.0 Vrms)
Line: +28 dBu (19.5 Vrms)
Rtn A, B: +18 dBu (6.2 Vrms)
Com Rtn: +24 dBu (12.3 Vrms)
External Slate Mic: +12 dBu (3.2 Vrms)
High-Pass Filters Adjustable 10 Hz to 320 Hz, 18 dB/oct. 1st stage analog (before preamp), 2nd stage digital
Limiters Limiters available at all channels, buses, headphones, for all sample rates
Analog first stage, all subsequent stages digital
Attack time: 1 ms
Release time: adjustable, 50 ms to 1000 ms
Threshold: adjustable, -2 dBFS to -12 dBFS
Selectable knee: hard or soft
Selectable ratio: inf:1, 20:1, 18:1, 16:1, 14:1, 12:1, 10:1
Delay Channel Adjustable 0-50 ms
Output Adjustable 0-500 ms
Maximum Gain  Trim stage (mic input): 76 dB
Trim stage (line input): 50 dB
Fader stage: 16 dB
Bus stage: 16 dB
Headphone stage: 20 dB • Mic-to-Line: 108 dB
Mic-to-Headphone: 112 dB
Outputs XLR (L, R) active-balanced, 250/3.2k/120 ohms (mic/-10/line)
TA3 (X1-X4) active-balanced, 250/3.2k/120 ohms (mic/-10/line)
3.5mm (X5,X6, X7, X8): unbalanced, stereo, 1.8k ohms
Headphone Outputs ¼”, 3.5 mm
TA5 (along with mic input pins) for single connection to headset + mic
High output, 4 ohm output impedance, 400 mW + 400 mW at each connector, all individually driven
Compatible with headphones of any impedance
Maximum Output Level (all into 10k load) Line: +20 dBu (7.8 Vrms)
“-10”: +6 dBu (1.5 Vrms)
Mic: -20 dBu (0.078 Vrms)
X5/X6 Out: +6 dBu (1.5 Vrms)
Headphone outputs (¼”, TA-5, X7/X8): +14 dBu (4.0 Vrms)
A/D converters 32-bit, 120 dB, A-weighted dynamic range typical
Sampling rates 44.1 kHz, 47.952 kHz, 48 kHz, 48.048 kHz, 88.2 kHz, 96 kHz, 192 kHz
Digital Outputs AES3 transformer-balanced, in pairs; 1-2 (XLR-L), 3-4 (XLR-R)
110 ohm, 2 V p-p, AES and S/PDIF compatible
Recording Internal 256 GB SSD
Two removable SD Cards
Simultaneous recording to internal SSD and the two SD cards
exFAT formatting
20 tracks (16 iso channels, 4 buses)
Broadcast WAV monophonic and polyphonic file format
64-bit WAV (RF64) monophonic and polyphonic; support for files > 4 GB
AAC 2 track at 48 kHz, selectable bit rate 32, 64, 128, 192, 256 kbps
Automixing Dugan Automixing/MixAssist for up to 16 channels on left and right mix bus
USB USB-C (USB 3.1 type 1) for file transfer of internal SSD, both SD Cards
USB-A host for keyboard, external controller, external USB hubs supported for connecting multiple devices
Timecode and Sync Modes Supported: Off, Rec Run, Free Run, 24h Run, External, including External Auto-Record and Continuous modes.
Frame Rates: 23.98, 24, 25, 29.97 DF, 29.97 ND, 30 DF, 30 ND
Sample/Timecode Accuracy: 0.1 ppm (0.25 frames per 24 hours)
Timecode Input: 20k ohm impedance, 0.3 V - 3.0 V p-p (–17 dBu - +3 dBu)
Timecode Output: 75 ohm impedance, 5 V p-p (+12 dBu)
Word Clock Input: 10k/75 ohm selectable impedance, 1-5 V p-p input sensitivity
Word Clock Output: 75 ohm impedance, 5 V p-p output, at SR
Remote Control External: dual 10-18 V inputs on locking TA4 connectors, pin-4 = (+), pin-1 = (-)
Dual rear-mount Sony-style L-mount batteries with chargers
Intelligent power-down of unused mic preamps and other internal circuits
Environmental Operating: -20° C to 60° C, 0 to 90% relative humidity (non-condensing)
Storage: -40° C to 85° C
Dimensions (H x W x D) 5.1 cm x 24.5 cm x 18.5 cm ( 2.0 in x 10.0 in x 7.3 in) 
Weight 4.0 lbs (1.83 kg) unpackaged, without batteries 

 

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£7,280.00 £7,989.00
Saving Of:  £709.00 (9%)
(£6,066.67 Exc. VAT)
+

Availability:  

2 in stock now  

2 in stock now

Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  PN-BNDL-888-OR32
Manufacturer:  Sound Devices

Sound Devices
Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.

NEXT DAY DELIVERY

We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.

FINANCE AVAILABLE

Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.30am - 5.30pm, to discuss these options and find out what's available to you.

We accept PayPal, Visa, Mastercard, Maestro, American Express

Sound Devices 888 Portable Mixer-Recorder W/ Orca OR-32 Bundle

£7,280.00
CUSTOMERS ALSO BOUGHT
Orca OR-32 Sound Bag for 664
Orca OR-32 Sound Bag for 664
  • Works with Sound Devices: 552 , 664 ,664 + CL-6,  788T, 788T + CL-8, SD
  • An aluminium frame provides access to the inside from 6 directions
  • Detachable carrying handles & shoulder strap
  • Two giant pockets for storing any audio accessories
Only 2 in stock  Only 2 in stock
£320.00  £399.00
Sound Devices 888 Portable Mixer / Recorder
Sound Devices 888 Portable Mixer / Recorder
  • 8 mic/line preamplifiers / 16 channels / 20 tracks / 2 SD card slots / 256GB internal SSD
  • Shares many features as the premium Sound Devices Scorpio
  • A built-in three band EQ may be set to either pre- or post-fade for each channel
  • Dugan Automixing for up to 16 channels
3 in stock now  3 in stock now
£7,149.00  £7,590.00
Ambient Recording BC-150 163cm Plastic Boom Pole Case
Ambient Recording BC-150 163cm Plastic Boom Pole Case
  • BC-150 163cm Plastic Boom Pole Case
  • Fit the Ambient QX 5130 and QP 4140 boom poles
  • Length: 1.63m
  • Diameter: 5cm
Only 1 in stock  Only 1 in stock
£60.00  £72.00
Bubblebee Visor Hat/Cap w/ Detachable Sanitary Screen
Bubblebee Visor Hat/Cap w/ Detachable Sanitary Screen

The Visor Hat, Visor Cap and Visor Cap Wide all have detachable sanitary screens so you can make ready quickly in the case of any contact with talent or other departments.

18 in stock now  18 in stock now
£24.00  
Cinela Osix 2 Shockmount for Schoeps CMC + MK
Cinela Osix 2 Shockmount for Schoeps CMC + MK
  • An optimal compromise between vibration isolation and firmness of the mic mounting
  • All OSIX & MINIX are now equipped with unbreakable plastic isolators
  • Elastic properties give isolation and firmness qualities to the suspensions
  • Cinela is considered the ultimate in mic isolation for boompole mounting
Only 5 in stock  Only 5 in stock
£267.00  £267.60
Dinkum Systems FlexiMount Mic Holder
Dinkum Systems FlexiMount Mic Holder
  • FlexiMount™ is a quick-clamping microphone mount with a strong base
  • 9-link, 11” long arm, which may be accurately positioned for optimum audio results
  • It’s the perfect device for the fast set-up
  • The strong and flexible arm does not require tools to lengthen or shorten it
34 in stock now  34 in stock now
£39.00  £45.00
× Site Currency
£0.00