£87.00 - Meta data interface cable for RED cameras
- For connecting Lockit Synchronizer to Red Epic camera via RCP protocol
- 5-pin Lemo to 4-pin Lemo
- Length approx. 40 cm
|
|
£57.00 - USB cable for the Ambient Tiny Lockit
- Data transfer cable
- Featuring a USB A type to a 5-Pin Lemo
- Length: Approx. 100cm
|
|
£48.00 - Timecode output cable with BNC right angle plug
- 3.5 mm TRS plug (stereo) right angle
- Pad 40 dB to microphone level
- Wired to right channel only
|
|
£42.00 - Adaptor cable for iPod touch®, iPhone® & iPad®
- Timecode input cable for Ambient Lockit products to Apple mobiles
- BNC right angle to 3.5 mm TRRS jack, w/ pad line to mic level
- Length approx. 60 cm
|
|
£66.00 - Adaptor cable for iPhone5® & iPad mini®
- Timecode input cable for Ambient Lockit to mobile Apple products
- Lemo 0B 5-pin to 3.5 mm TRRS jack, w/ pad line to mic level
|
|
£72.00 - External Lockit power cable. Hirose to Lemo 5-pin.
- 4-pin Hirose to 5-pin Lemo
- Length: Approx. 50 cm
- Colour: Red
|
|
£87.00 - For RED Cameras or Expanders with 4-pin SYNC port
- Supplies timecode, genlock with a single connection
- 5-pin push-pull lemo connection
- 4-pin push-pull lemo connection
|
|
£57.00 - Timecode input cable with BNC Right Angled plug to 5-Pin Lemo
- BNC right angle to 5-pin Lemo
- Length: Approx. 40 cm
|
|
£60.00 - Timecode input cable with BNC right angle plug
- RED Epic 4 pin lemo connection to feed timecode to camera from BNC
- Right Angled BNC to Lemo 4-pin 00
- Length: Approx. 40cm
|
|
£81.00 - Used for jamming timecode from a generator to Audio Ltd. A10 or Zaxcom
- Suitable as audio input for Sennheiser and Wisycom Transmitters
- Unidirectional Lemo 5-pin to Lemo 3-Pin
- Length: Approx. 40 cm
|
|
£87.00 - Ambient LTC-OUT/EPIC Timecode Output Cable
- Lockit Timecode output cable to Red Epic / Scarlet
- Features a Lemo Series 0B 5-pin to Lemo Series 00 4-pin
- Length: Approx 40cm
|
|
£78.00 - Timecode output cable with 5-pin Lemo to 3.5mm TRS right angle plug
- Plus jack for feeding microphone and timecode into DSLR
- Microphone cable to left channel, timecode cable to right channel
- Features a 20dB pad
|
|
£105.00 - Connects Sound Devices 6-Series Mixer / Recorders to a Master Lockit
- Connects the Master Lockit ACN port to the 6 Series Mixer's USB port
- Lemo 0B 5-pin to USB-A connector
- Integrated HID to RS232 converter
|
|
£135.00 - Available in two variations:
- MLC-L1B10: RJ45 to Lemo Series 1B 10-pin
- MLC-L1B10P: RJ45 to Lemo Series 1B 10-pin with breakout to Hirose 4-pin
- Length: Approx. 50cm
|
|
£57.00 - Output cable for the Ambient Lockit family
- This is a tool for syncing audio recorders on-the-go
- 5-pin Lemo connector to BNC 90° and is 15.75" (40 cm) long
|
|
£63.00 - ACN-CL Lockit sync output cable for Genlock / Wordclock
- 5-Pin Lemo with Yellow Mark to BNC 90° Male
- Cable is approximately 40cm
|
|
£75.00 - The timecode signal unidirectional, flows one way only
- 5-pin Lemo to 5-pin Lemo
- Length: Approx. 60 cm
|
|
£66.00 - Features high quality cable and connectors
- Designed specifically for timecode input
- Features a 3-Pin XLR Female to 5-Pin Lemo connector
|
|
£99.00 - Bi-Directional. LTC In/Out, Ascii In/Out, tune ref. Lemo to Lemo
- 5-pin Lemo to 5-pin Lemo. Coiled cable
- Length: Approx. 50 cm
- Colour: Black
|
|
£66.00 - Timecode output cable with 5-pin Lemo to 3-pin XLR male
- 5-pin Lemo to 3-pin XLR male
- Length: Approx. 60 cm
- Colour: Red
|
|
£72.00 - Pinknoise Custom 5-pin Lemo to 3-pin Lemo
- Timecode IN Cable for Audio Ltd A10-TX
- High quality Pinknoise custom timecode cable
- 5-PIN LEMO to 3-PIN LEMO Timecode cable, 40.6 cm
|
|
£54.00 - Pinknoise Custom BNC to 3-Pin Lemo Timecode IN Cable
- Designed for the Audio Ltd. A10-TX
- Timecode cable, BNC to LEMO 3-pin
- To connect external timecode sources to the A10-TX
|
|
£63.00 - 5 Pin Lemo to 5 Pin Lemo In/Out (Bi-directional) Timecode Cable
- This cable is for feeding timecode in/out
- The Timecode signal can flow both ways in this cable
- Approximately 50cm in length
|
|
£45.00 - Pinknoise Custom 5-Pin Lemo to BNC (RA) T/C Out 60cm Cable for Timecode
- Can be used where the timecode signal flow is from the lemo
- Timecode outputs from the lemo to a timecode input on the BNC
- Length: Approximately 60cm
|
|
£60.00 - Pinknoise Custom 5-Pin Lemo to HR10A Power In Cable 45cm
- 5-Pin Lemo to HR10A Power In Cable 45cm
- Hirose PWR to 5-Pin Lemo PWR In
- Length: 45cm
|
|
£26.00 - BNC Right Angle to BNC Right Angle Timecode or Genlock In/Out Cable.
- Used for carrying a timecode signal to and from video/audio devices.
- Length: Approx 40cm. Connectors: BNC Right Angled
|
|
£27.00 - BNC Right Angle to BNC Right Angle Timecode or Genlock In/Out Cable
- Used for carrying a timecode signal to and from video/audio devices
- Cable Lengths: 1m, 3m, 10m
- Sold as a pair
|
|
£45.00 - Pinknoise Custom BNC to 5-Pin Lemo T/C In 60cm Cable for Timecode
- This BNC to 5-Pin Lemo T/C In cable is recommended for use with the Sound Devices 788t
- If you are unsure of this cables compatibility with other products, please contact our office.
- Length: Approximately 60cm
|
|
£36.00 - BNC Straight to BNC Straight Timecode or Genlock In/Out Cable
- Used for carrying a timecode signal to and from video/audio devices
- Excellent Pinknoise Custom quality cables
- Designed and manufactured with audio quality as the highest priority
|
|
£24.00 - BNC straight to BNC straight Timecode or Genlock In/Out Cable
- Used for carrying a timecode signal to and from video/audio devices
- Excellent Pinknoise Custom quality cables
- Designed and manufactured with audio quality as the highest priority
|
-Output-Cable-to-RED-SYNC_1.jpg)
-Timecode-Cable_1.jpg)
-TC-Out-60cm-Cable-for-Timecode_1_1.jpg)
-to-BNC-(RA)-TC-or-Genlock-40cm-Cable_1.jpg)
-RG58-50ohm_1.jpg)
