Wisycom MCR42 Dual Receiver w/MTP41s x1 - Ex-Demo

Wisycom MCR42 Dual Receiver w/MTP41s x1 - Ex-Demo
Wisycom MCR42 Dual Receiver w/MTP41s x1 - Ex-DemoWisycom MCR42 Dual Receiver w/MTP41s x1 - Ex-DemoWisycom MCR42 Dual Receiver w/MTP41s x1 - Ex-DemoWisycom MCR42 Dual Receiver w/MTP41s x1 - Ex-Demo

Wisycom MCR42 Dual Receiver w/MTP41s - Ex-Demo

  • This product is Ex-Demo
  • Condition is 9/10
  • Comes with case. Light marks on units. No signs of use.

Kit Includes:

  • MCR42 Dual Receiver (470-700 MHz)
  • x1MTP41 Bodypack Transmitter (470-654 MHz)
  • Antennas for all units.
  • Case

WisyCom MCR-42s3 Dual Diversity Receiver

Dual True Diversity - UHF Miniature Camera Receiver Modular Execution "Stand-Alone" Or "Slot-In" (Panasonic, Sony, Grass Valley)

MCR42 is a camera receiver designed for best-in-class performances. Four receivers are internally coupled by two in a real TRUE DIVERSITY CONFIGURATION. Its front end has a chain of microcontrolled-driven movable filters to allow BROADBAND OPERATION up to 240 MHz with great selectivity.
A powerful low consumption DSP gives you the best of analogue and digital technologies in an hybrid approach for smooth operations, high coverage and with our patented PTT (push to talk) already integrated.


  • Dual true diversity in a modular stand-alone or slot-in format.
  • Switching bandwidth up 230 MHz in the UHF range.
  • DSP based audio processing for unbeatable audio and digital outputs with our PTT (push to talk) patented technology already integrated.
  • 40 groups of 60 frequencies fully user programmable.
  • Multicompander operations
  • Infrared interface for programming and transmitter synchronization
  • Wisycom exclusive digital sub-carrier telemetry technology allows:
        remote TX battery monitoring
        tone-squelch operating
        PTT function (An optional back-panel module is available, with the secondary intercom output)
  • Easy setup and operation thru a OLED display

WisyCom MTP41s Wideband Bodypack Transmitter

The WisyCom MTP41 is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to OLED display, dedicated buttons and a joggle selector. MTP41 benefit also of the latest Wisycom RF technology along with an enhanced robustness against noise.


  • Up to 232 MHz bandwidth in 470/798 MHz range. Please select from option menu above
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (60g without batteries)
  • User selectable multi-companding systems:
        ENR (noise optimized)
        ENC (voice optimized)
  • Battery: 1 AA Alkaline or rechargeable NiMH
  • Autonomy:
  •     > 5h @ 50mW output power
        > 7h @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 80dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments

MCR42 Specifications

Frequency ranges N 470 to 700 MHz
Switchable channels 40 groups of 60 channels fully user programmable
Switching-window Up to 232 MHz
Frequencies Microprocessor controlled frequency synthesizer circuit, with 25 kHz minimum step. The frequencies are easily PC reprogrammable with the optional UPK Mini Programming Kit
Frequency error < ± 2.5 ppm, in the rated temperature range
Temperature range -10 to +55 °C
Modulation FM, with 50 μs de-emphasis
Nominal deviation ±40 kHz (Max. operating dev. = ± 60 kHz)
Antenna input impedance 50 ohm SMA type (SWR < 1:2; typ. 1:1.4)
  • 2 μV ( 0 dBμV), for SND/N > 58 dB
  • 5 μV (14 dBμV), for SND/N > 98 dB
in the whole switching window
Amplitude response < 0.5 dB (RF input sig.:6 dBμV to 100 dBμV)
Co-channel rejection > 2.5 dB
Adjacent chan. selectivity > 80 dB typical (for ch. spacing ≥ 400 kHz)
Spurious rec. rejection > 100 dB
IF image rejection > 90 dB
Intermod. rejection > 76 dB
IIP3 > +10 dBm typical
Spurious emissions < 2 nW (typical = 0.1 pW)
Noise Reduction system ENR (Wisycom Extended-NR), noise optimized
ENC (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
Others, compatible with most systems, through an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth 30 Hz to 20 kHz
Frequency response ± 0.5 dB in the 30 Hz to 19 kHz range
Distortion 0.3 % typical
SND/D ratio (Analogue) 110 dB typical [*]
SND/D ratio (AES3) >125 dB typical [*]
POWER LEDs 2 multicolor RGB LEDs to easy indicate Rx1 & Rx2 power status:
  • GREEN, if “Receiver ON” with external power supply
  • RED, if LEDs blinking indicates power supply status of transmitter
  • slow blinking, at 25% battery capacity
  • fast blinking, at 12.5% battery capacity
RF LEDs 2 multicolor RGB LEDs to easy indicate Rx1 & Rx2 RF status
  • RED, if both receivers RF level is under squelch level
  • GREEN, if signal above squelch level & antenna A (green) is active
  • BLUE, if signal above squelch level & antenna B (blue) is active
  • YELLOW, if signal above squelch and both antenna are used
AUDIO LEDs 2 multicolor RGB LEDs to easy indicates Rx1 & Rx2 audio status
  • RED, if audio is muted because of squelch (or tone squelch if active)
  • GREEN, if audio is active and tone squelch present
  • BLUE, if audio is active and tone squelch not present
Front buttons Simple operation with 4 buttons to quickly monitor and setup the receiver
One touch function for frequency scan and sync function
  • External = 5 to 18 Vdc (1.5 W max)
  • Autonomous. = with optional BCA 42 Battery Module (5 x IEC-LR6 1.5V size-AA alkaline or rechargeable batteries)
Dimensions “Slot-in” end plate = 68 x 18 x 115 mm, “Stand-alone” end plate. = 68 x 18 x 135 mm
Weight 180g approx
Analogue Audio Output
  • Audio line-output electronically balanced on two 3 pin mini-XLR Female connector
  • Audio line-output level Adjustable in one dB steps between -20 and +6 dBu (nominal) and MAX +12 dBu (peak deviation)
  • Audio line-output imped. ≤ 200 ohm
Push to Talk (PTT) Audio Output electronically balanced on a 5 pin mini-XLR Male connector
Digital Audio Output
  • electronically balanced on 3 pin mini-XLR Male connector
  • AES3 @ 48 kHz

MTP41S Specifications

Switchable channels 2400 allocated by 40 groups of 60 channels (in specific frequency range), quickly selectable with dedicated buttons
Switching window Up to 232 MHz, depending on band
1 470 to 654 MHz
2 566 to 798 MHz
3 510 to 698 MHz
Finish/Colour Black or Titanium Grey
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability ± 2,5 ppm (in the rated temperature range)
Temperature range -10 to +55 °C
Max RF power
  • 50 mW (ERP) when high power selected
  • 10 mW (ERP) when low power selected
Spurious emissions < 2 nW
Modulation Wideband FM, with 50 µs pre-emphasis
Nominal deviation ±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature The MTP40S transmits a digitally modulated sub-carrier for:
  • tone-squelch operating
  • remote battery monitoring
  • optional PTT (push to talk) operation
AF input connector LEMO option Configurable on ‘mic’ display menu in 5 options:
  • ‘2 wires’: gain selectable -40 to +40 (-54 dBu to +26 dBu peak), no bias voltage
  • ‘2 wires + bias’: gain selectable -20 to +40 (-54 dBu to + 6 dBu peak), 5.5 V on 4k7 bias supply
  • ‘3 wires:’ gain selectable -40 to +40 (-54 dBu to +26 dBu peak)
  • ‘2 wires & phantom’ gain selectable -40 to +40 (-54 dBu to +26 dBu peak)
  • ‘2 wires + bias & phantom’: gain selectable -20 to +40,(-54 dBu to + 6 dBu peak), 5.5 V on 4k7 bias supply
AF input level 80 dB adjustable range from -60 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max. input level +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-Reduction ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack and Recovery time, voice optimized & with reduced pre-emphasis
AF bandwidth
  • 45 Hz to 21 KHz (3dB)
  • 55 Hz to 20 KHz (1dB)
Distortion < 0.3 % (0.15 % typ.)
Signal-to-noise ratio
  • typ. 115 dB (A)rms with 40 kHz deviation
  • typ. 121 dB (A)rms with 56 kHz deviation

Led indication with bi-color led (red & green) on wireless power switch:

  • Wireless transmission status: GREEN on/off
  • Modulation peak (if activated): RED
  • Battery lifetime status: GREEN – steady (> 25%) – slowly blinking (< 25%) - quickly blinking (<12%)
  • PTT status: RED if active
Display High contrast OLED (Organic light-emitting diode) bi-color display (96 x 36 pixels)
8 step battery lifetime indication: 7 bars (100%, 87%, 75%, 63%, 50%, 38%, 25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 3 of the AF connector can be setup to an external push button
Power supply 2 AA size batteries (Alkaline, rechargeable NiMH)
MTP40 Battery life (2 AA alkaline)
  • approx. 10 hours @ 50mW continuous working
  • approx. 14 hours @ 10mW continuous working
Dimensions 73 x 61 x 17.5 mm (Height-Width-Depth, without clip)
Weight Approx. 80 g. without batteries (120g with batt.)

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£2,990.00 (£2,491.67 Exc. VAT)


Only 1 in stock  

Only 1 in stock

Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Part No.:  PPN-108
Manufacturer:  WisyCom

Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.


We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.


Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.30am - 5.30pm, to discuss these options and find out what's available to you.

We accept PayPal, Visa, Mastercard, Maestro, American Express

Wisycom MCR42 Dual Receiver w/MTP41s x1 - Ex-Demo

× Site Currency