Wisycom MCR42 w/TA5, MTP41 & MTP30

Wisycom MCR42 w/TA5, MTP41 & MTP30
Wisycom MCR42 w/TA5, MTP41 & MTP30Wisycom MCR42 w/TA5, MTP41 & MTP30Wisycom MCR42 w/TA5, MTP41 & MTP30Wisycom MCR42 w/TA5, MTP41 & MTP30

Wisycom MCR42 w/TA5, MTP41 & MTP30

  • Used | 7/10 | 30 Day Warranty
  • Includes Case. Small scratches and marks around both TX. Heavy wear to RX.
  • The paint is bubbling and loose.
  • The screen is worn and can be difficult to read. 

Wisycom MCR42

MCR42 is a camera receiver designed for best-in-class performances. Four receivers are internally coupled by two in a real TRUE DIVERSITY CONFIGURATION. Its front end has a chain of microcontrolled-driven movable filters to allow BROADBAND OPERATION up to 240 MHz with great selectivity. A powerful low consuption DSP gives you the best of analogue and digital technologies in an hybrid approach for smooth operations, high coverage and with our patented PTT (push to talk) already integrated.

Features:

  • Dual true diversity in a modular stand-alone or slot-in format
  • Switching bandwidth up 240 MHz in the UHF range
  • DSP based audio processing for unbeatable audio and digital outputs with our PTT (push to talk) patented technology already integrated.
  • 40 groups of 60 frequencies fully user programmable.
  • Multicompander operations
  • Infrared interface for programming and transmitter synchronization
  • Wisycom exclusive digital sub-carrier telemetry technology allows:
    – remote TX battery monitoring
    – tone-squelch operating
    – PTT function (An optional back-panel module is available, with the secondary intercom output)
  • Easy setup and operation thru a OLED display

Wisycom MTP41

MTP41S is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to OLED display, dedicated buttons and a joggle selector. MTP41S benefit also of the latest Wisycom RF technology along with an enhanced robustness against noise.

Features:

  • Up to 232 MHz bandwidth in 470/798 MHz range (others on request)
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Input dynamic extension with an integrated HW limiter (30 dB above peak)
  • Ultra-light metal alloy body (60g without battery)
  • User selectable multi-companding systems:
    ENR (noise optimized)
    ENC (voice optimized)
  • Battery: 1 AA Alkaline or rechargeable NiMH or Lithium
  • Autonomy:
    > 5h @ 50mW output power
    > 7h @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 80dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments

Wisycom MTP30

MTP30 is an extremely small and light pocket transmitters especially designed for professional wireless microphone applications. Very easy and quick to use thanks to OLED display and gain/freq button and an easy joggle selector. MTP30 benefits also of the latest Wisycom RF technology along with an enhanced robustness against noise and inter-modulation.

Features:

  • Up to 120 MHz bandwidth in 470/870 MHz range
  • Enhanced robustness against inter-modulation and antenna performances:
    • RF part with pass-band filter and circulator (option)
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (80g without batteries)
  • ENR compander system (attack/release time independent)
  • Battery: – 2 AA Alkaline or rechargeable NiMH
  • Autonomy:
    • > 10h @ 50mW output power
    • > 14h @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 80dB in 2dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments

Wisycom MCR42

Frequency ranges N option: 470 ÷ 700 MHz
M option: 566 ÷ 798 MHz 
Switchable channels 2400 managed in 40 groups ofr 60 frequencies completely user  customizable 
Switching-window  Up 232 MHz 
Frequencies   microprocessor controlled frequency synthesizer circuit, with 25 kHz minimum step;
frequencies is easily PC reprogrammed with optional UPK300E/UPKmini programmer
Frequency error < ± 2.5 ppm, in the rated temperature range
Modulation  FM, with de-emphasis
Nominal deviation ±40 kHz (Max. operating dev. = ± 60 kHz)
“A” / “B” antenna inputs with SMA connectors
Antenna input impedance 50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity 2 μV ( 6 dBμV), for SND/N > 58 dB;
 5 μV (14 dBμV), for SND/N > 98 dB
in the whole switching-window*
Amplitude response < 0.5 dB (RF input sig.: 6 dBμV ÷ 100 dBμV)
Co-channel rejection > 2.5 dB
Adjacent chan. selectivity > 80 dB typical (for ch. spacing ≥ 400 kHz)
Spurious rec. rejection > 100 dB
IF image rejection > 90 dB
Intermod. rejection > 76 dB
IIP3 > +10 dBm typical
Spurious emissions < 2 nW (typical = 0.1 pW)
Noise Reduction system ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
⇒ Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable 
AF bandwidth 30 Hz ÷ 20 kHz
Frequency response ± 0.5 dB in the 30 Hz ÷ 19 kHz range
Distortion MCR42S: 0.3 % typical   MCR42S2/S3: 0.1 % typical
SND/D ratio (Analogue) 110 dB typical*
SND/D ratio (AES3) MCR42S: >125 dB typical   MCR42S2/S3:  >140 dB typical
Audio output 2 audio line-outpus electronically balanced on two 3 pin mini-XLR Female connector
Audio output level  Adjustable 1 dB step between (peak dev level):
-30dBu [MCR42S/S2/S3] /-18dBu [MCR42]  to  +12dBu [MCR42/S/S2] / +18dBu [MCR42S3] 
Audio line-output imped. ≤ 200 ohm
PTT line-output 1 & 2    Electronically balanced on a 5 pin mini-XLR Male connector 
Digital output digital line-output 1 & 2 electronically balanced on 3 pin mini-XLR Male connector 
Digital sample rate AES3 @ 48 kHz
POWER LEDs (NEW display) 1 multicolour RGB LEDs for the power status of the receiver
(OLD display) 2 multicolour RGB LEDs to easy indicate Rx1 & Rx2 power status
RF LEDs    2 multicolour RGB LEDs to easy indicates Rx1 & Rx2 RF status. Always on in normal operation
AUDIO LEDs    2 multicolour RGB LEDs to easy indicates Rx1 & Rx2 audio status
Front buttons Simple operation with 4 buttons to quickly monitor and setup the receiver.  
One touch function for a frequency scan and sync function.                  
Powering - External = 5 ÷ 18 Vdc (1.5 W max)
- Autonomous. = with optional BCA 42 Battery Module
(5 x IEC-LR6 1.5V size-AA alkaline or rechargeable elements)
Power consumption MCR42 max 125mA @ 12V  Approx. 6 hours (with battery pack BCA42)
MCR41 max 95mA @ 12V
Battery life approx. 6 hours with battery pack BCA42 (5 x IEC-LR6 1.5V size-AA alkaline)
Temperature range -10 ÷ +55 °C
Dimensions “Slot-in” execution= 115  x 68 x 18 mm (HxWxD), “Stand-alone” exec.= 135 x 68 x 18 mm (HxWxD)
Weight 180 g approx.
  *RMS value, A-weighted, 22 Hz / 22 KHz

MTP41

Frequency ranges B5 option: 470 ÷ 654 MHz
B3 option: 510 ÷ 698 MHz
B2 option: 566 ÷ 798 MHz 
Switchable channels 2400 managed in 40 groups ofr 60 frequencies completely user  customizable 
Switching-window  Up to 232 MHz, depending on band (see Variants below)
Frequencies   Quartz PLL  frequency synthesizer circuit (25 kHz step)
Frequency error ± 2.5 ppm, in the rated temperature range
RF Power switchable typ. 10 mW / 50 mW
note: in some countries high power can be disabled, for local norm!
Modulation  wideband FM, with pre-emphasis
Nominal deviation ±40 kHz
Peak deviation ±56 kHz
Spurious emissions < 2 nW
Telemetry feature TX transmits also a digitally modulated sub-carrier, suitable for: 
▪ tone-squelch operating    
▪ remote battery monitoring    
▪ optional PTT (push to talk) operation
Noise Reduction system ENR  (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC  (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth 45 Hz ÷ 21 KHz (3dB)
55 Hz ÷ 20 KHz (1dB)
Distortion < 0.3 %   (0.15 % typ.)
SND/D ratio (Analogue) typ. 115 dB (A)rms with 40kHz deviation
typ. 121 dB (A)rms with 56kHz deviation
Audio input connector LEMO or DPA
LEMO connector configurable on ‘mic’ display menu in 3 options:
▪ ’2 wires’: gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak), no bias voltage
▪ ‘2 wires + bias’: gain selectable -60 ÷ +40 (-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
▪ ‘3 wires: gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak)
DPA connector (2 pin microdot audio connector) configurable only
▪ '2 wires'
▪ '2 wires+bias'
Audio input level 100 dB adjustable range from -54 dBu (775 uV) to 46 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max input level  +46 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Managing interface IrDA
LED RGB led indication with (red, green and blue) on wireless power switch:
▪ Wireless transmission status: GREEN on/RED off
▪ Battery lifetime status: GREEN steady (> 25%), slowly blinking (< 25%), quickly blinking (<12%)
▪ Modulation peek (if activated & the limiter is disabled): RED
▪ Ptt status: RED if active
▪ Limiter into action: Blue
Battery lifetime indication 8 steps : 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 3 of the AF connector can be setup to an external push button
Display High contrast OLED (Organic light-emitting diode) white display (128 x 32 pixels)
Power supply 1 AA size cell (Alkaline, rechargeable NiMH or Lithium)
Battery life ▪ approx. 11 hours @ 50mW continuous working Lithium
▪ approx. 8 hours @ 50mW continuous working with NiMH
▪ approx. 4.5 hours @ 50mW continuous working with Alkaline
Temperature range -10 ÷ +55 °C
Dimensions 58.2 x 64.5 x 21.7 mm  (HxWxD) with clip
Weight Approx. 80 g. without battery (120g with batt.)

 

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-10 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the package(s) leaves our premises. Sometimes, due to stock restrictions or a non-completed order, delivery may take longer as there is a delay with couriers, which is unfortunately out of our hands. If your order is urgent, or details change, please do let us know.
For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 30 working days of receipt (14 to initiate the process), for a full refund or for an exchange for a different product from our range. Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may affect the level of refund you receive. For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£2,850.00 (£2,375.00 Exc. VAT)
+

Availability:  

1 in stock now  

1 in stock now

Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  PNUEQ-WISY-MCR42-41-30-KIT
Part No.:  PPN-53
Manufacturer:  WisyCom

WisyCom
Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.

NEXT DAY DELIVERY

We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.

FINANCE AVAILABLE

Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.00am - 5.00pm, to discuss these options and find out what's available to you.

We accept PayPal, Visa, Mastercard, Maestro, American Express

Wisycom MCR42 w/TA5, MTP41 & MTP30

£2,850.00
× Site Currency
£0.00