Wisycom MCR54 w/ 4 x MTP40S Transmitters & BPA54 Bottom Plate Quad Kit

Wisycom MCR54 w/ 4 x MTP40S Transmitters & BPA54 Bottom Plate Quad Kit
Wisycom MCR54 w/ 4 x MTP40S Transmitters & BPA54 Bottom Plate Quad KitWisycom MCR54 w/ 4 x MTP40S Transmitters & BPA54 Bottom Plate Quad KitWisycom MCR54 w/ 4 x MTP40S Transmitters & BPA54 Bottom Plate Quad Kit
Wisycom MCR54 w/ 4 x MTP40S Transmitters & BPA54 Bottom Plate Quad KitWisycom MCR54 w/ 4 x MTP40S Transmitters & BPA54 Bottom Plate Quad KitWisycom MCR54 w/ 4 x MTP40S Transmitters & BPA54 Bottom Plate Quad Kit

Wisycom MCR54 w/ 4 x MTP40S Transmitters & BPA54 Bottom Plate Quad Kit

This Kit Includes:

  • 1x MCR54 4-Channel Multiband True Diversity Receiver
  • A choice of:
  • 1 x BPA54 Bottom Plate (1 x 4-Pin Hirose + 2 x TA5-M)
  • A range of antenna whips for the RX receiver
  • A pair of antenna whips for each transmitter (Band 507 & Band 590)

Wisycom MCR54 4-Channel Multiband True Diversity Receiver

MCR54 is a camera quadruple true diversity wireless microphone receiver system in a modular stand alone or slot in configuration. It’s compatible with most camera’s slots and “multi-slot” mixer accessories.

Multi-Band RF Tuning
Wideband just isn't enough anymore! Upgrade to a Multi-Band system with up 790 MHz tuning range to find your frequency, anywhere in the World.
High Density with NB Filters
With eight internal receiver boards, the MCR54 boasts an unprecedented capacity for range and reliability.
True-Diversity Reliability
With the combination of Narrowband Modulation and Linear transmitters, set your channels every 200kHz with-out intermodulation distortion and get an extra 3dB sensitivity.
Multi Companding
DSP delivers ENC and ENR algorithms for perfect audio in any application with less than 1ms delay – with create and shape presets for the desired sound. It enables the use of third-party transmitters with Wisycom receivers

Features

  • Four channels True Diversity receiver (8 Receiver boards!)
  • Exceptional compactness and high robustness
  • DSP Analogue & Digital Audio Output (AES3)
  • Up to 790 MHz bandwidth in 470/1260 MHz range
  • Next Gen Multiband front-end filtering:
    • High Q electronically tunable filter in 470-800 MHz
    • 1st narrowband filter
    • 2nd narrowband filter
  • Wideband and Narrowband DSP-FM operation (SW selectable):
    • Narrowband allows more 50% band efficiency
    • Narrowband allows about 3dB extra sensitivity and noise immunity
  • Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
  • High contrast OLED display
  • Automatic scan & transmitter programming through infrared and Bluetooth 5 long range
  • DSP based for extreme flexibility and multi-companding operations
  • Monitor & control through USB C or Bluetooth 5 (long range) on Wisycom Manager 2.0 (computer SW)
  • Rear antenna connectors and micro audio and power adapter

Bands Available

B1 For Europe and UK market (Included in this bundle)
Tunable: 470 ÷ 800 + Fixed Band 1: 960÷1000 + Fixed Band 2: 1045÷1071 MHz
B2 For Europe and USA market (Available on request)
Tunable: 470 ÷ 800 + Fixed Band 1: 823÷832 + Fixed Band 2: 940÷960 MHz (USA/EU)
B3 For Japanese market (Available on request)
Tunable: 470 ÷ 800 + Fixed Band 1: 806÷809 + Fixed Band 2: 1240÷1260 MHz (JP)

Wisycom MTP40S Beltpack Transmitter

The Wisycom MTP40S Beltpack Transmitter – is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Lavalier microphones such as the Sanken Cos-11 or DPA 4060 connect via 3-Pin Lemo.

Very easy and quick to use thanks to an OLED display, dedicated buttons and a joggle selector. The MTP40S benefits from the latest Wisycom RF technology along with enhanced robustness against noise and inter-modulation.

Features:

  • Choose Tuneable Bandwidth from 470 to 663 MHz or 510 or 698 MHz
  • Enhanced robustness against self-interference and antenna performance through a proprietary “intermodulation cancellation” circuit
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (80g without batteries)
  • User selectable multi-companding systems:
    • ENR (noise optimized)
    • ENC (voice optimized)
  • Battery: 2 AA Alkaline or rechargeable NiMH
  • Autonomy:
    • > 10 hours @ 50mW output power
    • > 14 hours @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup through the OLED display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 80dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
  • 48V phantom power for wired condenser microphones using the PHA48 accessory

MCR 54 Specifications

Frequency ranges MCR54 B1: 470 ÷ 800 + 960÷1000 + 1045÷1071 MHz (UK)
MCR54 B2: 470 ÷ 800 + 823÷832 + 940÷960 MHz (USA/EU)
MCR54 B3: 470 ÷ 800 + 806÷809 + 1240÷1260 MHz (JP)
Switchable channels 2400 user programmable frequencies, organized in 40 groups of 60 channels
Switching-window up 790 MHz
Frequencies microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step.
The frequencies can be easily PC reprogrammed with USB C, Bluetooth 5 (long range) or optional UPKmini Programming
Frequency error < ± 2.5 ppm, in the rated temperature range
Modulation FM mono, wideband or narrowband IFB (SW selectable)
Peak deviation ±54 kHz (wideband), ± 40 kHz (narrowband)
Antenna input impedance 50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity 2 μV ( 6 dBμV), for SND/N > 58 dB;
5 μV (14 dBμV), for SND/N > 98 dB
in the whole switching-window*
Amplitude response < 0.5 dB (for RF input signal:6 dBµV ÷ 100 dBµV)
Adjacent chan. selectivity > 80 dB typical (for channel spacing ≥ 400 kHz)
Spurious emissions < 2 nW (typical = 0.1 pW)
Noise Reduction system ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
ENS (for live application)
Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth 30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 15 kHz (narrowband)
Frequency response ± 0.5 dB in the 30 Hz ÷ 19 kHz range (wideband),
± 0.5 dB in the 30 Hz ÷ 13 kHz (narrowband)
Distortion 0.3 % typical
SND/D ratio (Analogue) 120 dB typical*
SND/D ratio (Digital) > 125 dB typical
Audio output Electronically balanced on 5 pin mini-XLR Female connector analogue or digital (SW selectable)
Digital sample rate AES3 @ 48 kHz
Monitor output headphone 3.5 mm jack socket
Managing interface USB C, Bluetooth 5 (long range) or optional UPKmini Programming
LEDs 2 multicolour RGB LEDs to easy indicates Power & Bluetooth
4 multicolour RGB LEDs to easy indicates the audio status of the 4 RX
Display OLED 128x64 (white)
Powering - External = 5 ÷ 18 Vdc (2.5 W max)
- Autonomous. = with optional BCA 54 Battery Module
Power consumption 2.5 Watt max (with 4 active receivers)
Temperature range -10 ÷ +55 °C
Dimensions 104 x 85 x 25 mm (H x W x D)
Weight 230g
  *RMS value, 22 Hz / 22 kHz, unweighted

Configurations

Downloads

Brochure PDF

MTP40s Specifications

Switchable channels 2400 allocated by 40 groups of 60 channels (in specific frequency range), quickly selectable with dedicated buttons
Switching window Up to 232 MHz, depending on band 
1 470 ÷ 654 MHz
2 566 ÷ 798 MHz
3 510 ÷ 698 MHz
T 794 ÷ 798 MHz (For Thailand Only)
other ranges based on Country restriction (see Variants)
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability ± 2,5 ppm (in the rated temperature range)
Temperature range -10 ÷ +55 °C
Max RF power ▪ 10 mW (ERP) (to respect some local norm)
▪ 50 mW (ERP) (note: in some countries middle power can be disabled, for local norm!)
▪ 100 mW (ERP) (note: in some countries high power can be disabled, for local norm!)
Spurious emissions < 2 nW
Modulation wideband FM, with pre-emphasis
Nominal deviation ±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature MTP40S transmits also a digitally modulated sub-carrier, suitable for: 
▪ tone-squelch operating ▪ remote battery monitoring ▪ optional PTT (push to talk) operation
AF input connector LEMO option Configurable on ‘mic’ display menu in 5 options:
▪ ’2 wires’: gain selectable -40 ÷ +40 (-54 dBu ÷ +26 dBu peak), no bias voltage
▪ ‘2 wires + bias’: gain selectable -20 ÷ +40 (-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
▪ ‘3 wires: gain selectable -40 ÷ +40 (-54 dBu ÷ +26 dBu peak)
▪ ‘2 wires & phantom’ gain selectable -40 ÷ +40 (-54 dBu ÷ +26 dBu peak),
▪ ‘2 wires + bias & phantom’: gain selectable -20 ÷ +40,(-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
AF input level 80 dB adjustable range from -60 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max. input level +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-Reduction ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth ▪ 45 Hz ÷ 21 KHz (3dB)
▪ 55 Hz ÷ 20 KHz (1dB)
Distortion < 0.3 % (0.15 % typ.)
Signal-to-noise ratio ▪ typ. 115 dB (A)rms with 40 kHz deviation
▪ typ. 121 dB (A)rms with 56 kHz deviation
Led RGB Led indication (red, green and blue):
▪ Wireless transmission status Green when RF transmission power is on, Red when RF transmission power is off. Blue when the input signal is above the peak threshold
▪ Modulation peak (if activated & limiter disabled): RED
▪ Battery lifetime status: GREEN – steady (> 25%) – slowly blinking (< 25%) - quickly blinking (<12%)
▪ Ptt status: RED if active
Display High contrast OLED (Organic light-emitting diode) white display (128 x 32 pixels)
8 step battery lifetime indication: 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 2 of the AF connector can be setup to an external push button
Power supply 2 AA size batteries (Alkaline, rechargeable NiMH or Lithium)
Battery life (2 AA alkaline)
▪ approx. 14 hours @ 10mW continuous working
▪ approx. 10 hours @ 50mW continuous working
▪ approx. 7 hours @ 100mW continuous working
Dimensions 73.1 x 64.5 x 21.6 mm (Height-Width-Depth) with clip
Weight Approx. 85 g. without batteries (135g with batt.)

MTP41S Specifications

Switchable channels 2400 allocated by 40 groups of 60 channels (in specific frequency range), quickly selectable with dedicated buttons
Switching window Up to 232 MHz, depending on band
1 470 to 654 MHz
2 566 to 798 MHz
3 510 to 698 MHz
Finish/Colour Black or Titanium Grey
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability ± 2,5 ppm (in the rated temperature range)
Temperature range -10 to +55 °C
Max RF power
  • 50 mW (ERP) when high power selected
  • 10 mW (ERP) when low power selected
Spurious emissions < 2 nW
Modulation Wideband FM, with 50 µs pre-emphasis
Nominal deviation ±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature The MTP40S transmits a digitally modulated sub-carrier for:
  • tone-squelch operating
  • remote battery monitoring
  • optional PTT (push to talk) operation
AF input connector LEMO option Configurable on ‘mic’ display menu in 5 options:
  • ‘2 wires’: gain selectable -40 to +40 (-54 dBu to +26 dBu peak), no bias voltage
  • ‘2 wires + bias’: gain selectable -20 to +40 (-54 dBu to + 6 dBu peak), 5.5 V on 4k7 bias supply
  • ‘3 wires:’ gain selectable -40 to +40 (-54 dBu to +26 dBu peak)
  • ‘2 wires & phantom’ gain selectable -40 to +40 (-54 dBu to +26 dBu peak)
  • ‘2 wires + bias & phantom’: gain selectable -20 to +40,(-54 dBu to + 6 dBu peak), 5.5 V on 4k7 bias supply
AF input level 80 dB adjustable range from -60 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max. input level +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-Reduction ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack and Recovery time, voice optimized & with reduced pre-emphasis
AF bandwidth
  • 45 Hz to 21 KHz (3dB)
  • 55 Hz to 20 KHz (1dB)
Distortion < 0.3 % (0.15 % typ.)
Signal-to-noise ratio
  • typ. 115 dB (A)rms with 40 kHz deviation
  • typ. 121 dB (A)rms with 56 kHz deviation
Led

Led indication with bi-color led (red & green) on wireless power switch:

  • Wireless transmission status: GREEN on/off
  • Modulation peak (if activated): RED
  • Battery lifetime status: GREEN – steady (> 25%) – slowly blinking (< 25%) - quickly blinking (<12%)
  • PTT status: RED if active
Display High contrast OLED (Organic light-emitting diode) bi-color display (96 x 36 pixels)
8 step battery lifetime indication: 7 bars (100%, 87%, 75%, 63%, 50%, 38%, 25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 3 of the AF connector can be setup to an external push button
Power supply 2 AA size batteries (Alkaline, rechargeable NiMH)
MTP40 Battery life (2 AA alkaline)
  • approx. 10 hours @ 50mW continuous working
  • approx. 14 hours @ 10mW continuous working
Dimensions 73 x 61 x 17.5 mm (Height-Width-Depth, without clip)
Weight Approx. 80 g. without batteries (120g with batt.)

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£6,360.00 (£5,300.00 Exc. VAT)
Frequency:  
+
Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  WISY-MCR54-QUAD-40-B7
Part No.:  Wisy-MCR54-B7kit-40
Manufacturer:  WisyCom

WisyCom
Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.

NEXT DAY DELIVERY

We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.

FINANCE AVAILABLE

Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.30am - 5.30pm, to discuss these options and find out what's available to you.

We accept PayPal, Visa, Mastercard, Maestro, American Express

Wisycom MCR54 w/ 4 x MTP40S Transmitters & BPA54 Bottom Plate Quad Kit

£6,360.00
CUSTOMERS ALSO BOUGHT
DPA d:screet CORE 6060 Subminiature Omnidirectional Lavalier Microphone
DPA d:screet CORE 6060 Subminiature Omnidirectional Lavalier Microphone
  • Amazing 3 mm CORE capsule technology
  • Renowned DPA sound in a 60% smaller package
  • Stainless steel, PVD coated mic housing
  • Modular adapter system fits most professional wireless systems
Only 10 in stock  Only 10 in stock
£399.00  £456.00
Ambient QAT-ECO Top Tip Eco XLR Mount for Boompoles
Ambient QAT-ECO Top Tip Eco XLR Mount for Boompoles
  • XLR / plug-on transmitter mount for boompoles
  • Boom cable interlock. Swift unplugging of boom cable
  • Ideal plug-on transmitter positioning
  • Reduces handling noise
Only 9 in stock  Only 9 in stock
£21.00  £24.00
Ambient Recording QAPL XLR-Clamp for QX Boompoles
Ambient Recording QAPL XLR-Clamp for QX Boompoles
  • Lets you fix your plug-on transmitter
  • Or attach the XLR plug of your internal cable at the bottom side of your boompole
  • The clamp is made of POM
  • Diameter: 34mm to 35mm. Weight: 40g
2 in stock now  2 in stock now
£24.00  £30.00
Ambient Recording QP 4140 4-Section Carbon Fibre Boom Pole (1.54 - 5.20m)
Ambient Recording QP 4140 4-Section Carbon Fibre Boom Pole (1.54 - 5.20m)
  • 4 Section Carbon Fibre Boom Pole
  • Collapsed Length: 1.54m (5'1")
  • Extended Length: 5.20m (17'1")
  • Weight: 1.0kg (2.2 lbs)
Sold out - More soon  Sold out - More soon
£564.00  £657.00
Audioroot EHRS4 60cm Hirose Cable (Various Connectors)
Audioroot EHRS4 60cm Hirose Cable (Various Connectors)
  • 24"/60cm Straight power cable
  • 4-pin Hirose male connector on both ends
  • 20AWG 2 conductors black cable (PVC insulation and jacket)
  • Select connector from drop down
Only 7 in stock  Only 7 in stock
£45.00  £57.00
Delkin Devices Advance SDHC 633X UHS-I Memory Card (32GB)
Delkin Devices Advance SDHC 633X UHS-I Memory Card (32GB)
  • Includes: Delkin Elite 633 UHS-I Memory Card, Protective Case
  • Compatibility: SDHC host devices (all classes) & SDXC host devices (all classes)
  • Speed: 633X (95MB/s read & 80MB/s write)
  • Operating Temp: -25C low and 85C high (-40C/85C storage)
19 in stock now  19 in stock now
£27.00  
× Site Currency
£0.00