Wisycom MCR54 w/ 4 x MTP41S Transmitters & BPA54 Bottom Plate Quad Kit

Wisycom MCR54 w/ 4 x MTP41S Transmitters & BPA54 Bottom Plate Quad Kit
Wisycom MCR54 w/ 4 x MTP41S Transmitters & BPA54 Bottom Plate Quad KitWisycom MCR54 w/ 4 x MTP41S Transmitters & BPA54 Bottom Plate Quad KitWisycom MCR54 w/ 4 x MTP41S Transmitters & BPA54 Bottom Plate Quad Kit
Wisycom MCR54 w/ 4 x MTP41S Transmitters & BPA54 Bottom Plate Quad KitWisycom MCR54 w/ 4 x MTP41S Transmitters & BPA54 Bottom Plate Quad Kit
Please note: This product can only be shipped to certain territories, please contact sales@pinknoise-systems.co.uk for more information

Wisycom MCR54 w/ 4 x MTP41S Transmitters & BPA54 Bottom Plate Quad Kit

This Kit Includes:

  • 1x MCR54 4-Channel Multiband True Diversity Receiver
  • 4 x MTP41s Single Battery Beltpack Transmitter
  • 1 x BPA54 Bottom Plate (1 x 4-Pin Hirose + 2 x TA5-M)

Wisycom MCR54 4-Channel Multiband True Diversity Receiver

MCR54 is a camera quadruple true diversity wireless microphone receiver system in a modular stand alone or slot in configuration. It’s compatible with most camera’s slots and “multi-slot” mixer accessories.

Multi-Band RF Tuning
Wideband just isn't enough anymore! Upgrade to a Multi-Band system with up 790 MHz tuning range to find your frequency, anywhere in the World.
High Density with NB Filters
With eight internal receiver boards, the MCR54 boasts an unprecedented capacity for range and reliability.
True-Diversity Reliability
With the combination of Narrowband Modulation and Linear transmitters, set your channels every 200kHz with-out intermodulation distortion and get an extra 3dB sensitivity.
Multi Companding
DSP delivers ENC and ENR algorithms for perfect audio in any application with less than 1ms delay – with create and shape presets for the desired sound. It enables the use of third-party transmitters with Wisycom receivers


  • Four channels True Diversity receiver (8 Receiver boards!)
  • Exceptional compactness and high robustness
  • DSP Analogue & Digital Audio Output (AES3)
  • Up to 790 MHz bandwidth in 470/1260 MHz range
  • Next Gen Multiband front-end filtering:
    • High Q electronically tunable filter in 470-800 MHz
    • 1st narrowband filter
    • 2nd narrowband filter
  • Wideband and Narrowband DSP-FM operation (SW selectable):
    • Narrowband allows more 50% band efficiency
    • Narrowband allows about 3dB extra sensitivity and noise immunity
  • Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
  • High contrast OLED display
  • Automatic scan & transmitter programming through infrared and Bluetooth 5 long range
  • DSP based for extreme flexibility and multi-companding operations
  • Monitor & control through USB C or Bluetooth 5 (long range) on Wisycom Manager 2.0 (computer SW)
  • Rear antenna connectors and micro audio and power adapter

Bands Available

B1 For Europe and UK market (Included in this bundle)
Tunable: 470 ÷ 800 + Fixed Band 1: 960÷1000 + Fixed Band 2: 1045÷1071 MHz
B2 For Europe and USA market (Available on request)
Tunable: 470 ÷ 800 + Fixed Band 1: 823÷832 + Fixed Band 2: 940÷960 MHz (USA/EU)
B3 For Japanese market (Available on request)
Tunable: 470 ÷ 800 + Fixed Band 1: 806÷809 + Fixed Band 2: 1240÷1260 MHz (JP)

Wisycom MTP41S Beltpack Transmitter

The Wisycom MTP41S Beltpack Transmitter  is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to an OLED display, dedicated buttons and a joggle selector. The MTP41 also benefits from the latest Wisycom RF technology along with enhanced robustness against noise.


  • Tunable bandwidth from 470 - 663 MHz or 510 to 698 MHz
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (60g without battery)
  • User selectable multi-companding systems:
    • ENR (noise optimized)
    • ENC (voice optimized)
  • Battery: 1 AA Alkaline or rechargeable NiMH
  • Autonomy:
    • > 5 hours @ 50mW output power
    • > 7 hours @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup by the OLED display, gain/freq button and joggle selector
  • Extended regulation on Mic input gain: 100dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments

MCR 54 Specifications

Frequency ranges MCR54 B1: 470 ÷ 800 + 960÷1000 + 1045÷1071 MHz (UK)
MCR54 B2: 470 ÷ 800 + 823÷832 + 940÷960 MHz (USA/EU)
MCR54 B3: 470 ÷ 800 + 806÷809 + 1240÷1260 MHz (JP)
Switchable channels 2400 user programmable frequencies, organized in 40 groups of 60 channels
Switching-window up 790 MHz
Frequencies microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step.
The frequencies can be easily PC reprogrammed with USB C, Bluetooth 5 (long range) or optional UPKmini Programming
Frequency error < ± 2.5 ppm, in the rated temperature range
Modulation FM mono, wideband or narrowband IFB (SW selectable)
Peak deviation ±54 kHz (wideband), ± 40 kHz (narrowband)
Antenna input impedance 50 ohm sma type (SWR < 1:2; typ. 1:1.4)
Sensitivity 2 μV ( 6 dBμV), for SND/N > 58 dB;
5 μV (14 dBμV), for SND/N > 98 dB
in the whole switching-window*
Amplitude response < 0.5 dB (for RF input signal:6 dBµV ÷ 100 dBµV)
Adjacent chan. selectivity > 80 dB typical (for channel spacing ≥ 400 kHz)
Spurious emissions < 2 nW (typical = 0.1 pW)
Noise Reduction system ENR / ENR-1.2 (Wisycom Extended-NR) , noise optimized
ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
ENS (for live application)
Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable
AF bandwidth 30 Hz ÷ 20 kHz (wideband), 30 Hz ÷ 15 kHz (narrowband)
Frequency response ± 0.5 dB in the 30 Hz ÷ 19 kHz range (wideband),
± 0.5 dB in the 30 Hz ÷ 13 kHz (narrowband)
Distortion 0.3 % typical
SND/D ratio (Analogue) 120 dB typical*
SND/D ratio (Digital) > 125 dB typical
Audio output Electronically balanced on 5 pin mini-XLR Female connector analogue or digital (SW selectable)
Digital sample rate AES3 @ 48 kHz
Monitor output headphone 3.5 mm jack socket
Managing interface USB C, Bluetooth 5 (long range) or optional UPKmini Programming
LEDs 2 multicolour RGB LEDs to easy indicates Power & Bluetooth
4 multicolour RGB LEDs to easy indicates the audio status of the 4 RX
Display OLED 128x64 (white)
Powering - External = 5 ÷ 18 Vdc (2.5 W max)
- Autonomous. = with optional BCA 54 Battery Module
Power consumption 2.5 Watt max (with 4 active receivers)
Temperature range -10 ÷ +55 °C
Dimensions 104 x 85 x 25 mm (H x W x D)
Weight 230g
  *RMS value, 22 Hz / 22 kHz, unweighted



Brochure PDF

MTP41S Specifications

Switchable channels 2400 allocated by 40 groups of 60 channels (in specific frequency range), quickly selectable with dedicated buttons
Switching window Up to 232 MHz, depending on band
1 470 to 654 MHz
2 566 to 798 MHz
3 510 to 698 MHz
Finish/Colour Black or Titanium Grey
Frequencies Quartz PLL frequency synthesizer circuit (25 kHz step)
Frequency stability ± 2,5 ppm (in the rated temperature range)
Temperature range -10 to +55 °C
Max RF power
  • 50 mW (ERP) when high power selected
  • 10 mW (ERP) when low power selected
Spurious emissions < 2 nW
Modulation Wideband FM, with 50 µs pre-emphasis
Nominal deviation ±40 kHz (Peak deviation = ±56 kHz)
Telemetry feature The MTP40S transmits a digitally modulated sub-carrier for:
  • tone-squelch operating
  • remote battery monitoring
  • optional PTT (push to talk) operation
AF input connector LEMO option Configurable on ‘mic’ display menu in 5 options:
  • ‘2 wires’: gain selectable -40 to +40 (-54 dBu to +26 dBu peak), no bias voltage
  • ‘2 wires + bias’: gain selectable -20 to +40 (-54 dBu to + 6 dBu peak), 5.5 V on 4k7 bias supply
  • ‘3 wires:’ gain selectable -40 to +40 (-54 dBu to +26 dBu peak)
  • ‘2 wires & phantom’ gain selectable -40 to +40 (-54 dBu to +26 dBu peak)
  • ‘2 wires + bias & phantom’: gain selectable -20 to +40,(-54 dBu to + 6 dBu peak), 5.5 V on 4k7 bias supply
AF input level 80 dB adjustable range from -60 dBu (775 uV) to 26 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max. input level +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Noise-Reduction ENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack and Recovery time, voice optimized & with reduced pre-emphasis
AF bandwidth
  • 45 Hz to 21 KHz (3dB)
  • 55 Hz to 20 KHz (1dB)
Distortion < 0.3 % (0.15 % typ.)
Signal-to-noise ratio
  • typ. 115 dB (A)rms with 40 kHz deviation
  • typ. 121 dB (A)rms with 56 kHz deviation

Led indication with bi-color led (red & green) on wireless power switch:

  • Wireless transmission status: GREEN on/off
  • Modulation peak (if activated): RED
  • Battery lifetime status: GREEN – steady (> 25%) – slowly blinking (< 25%) - quickly blinking (<12%)
  • PTT status: RED if active
Display High contrast OLED (Organic light-emitting diode) bi-color display (96 x 36 pixels)
8 step battery lifetime indication: 7 bars (100%, 87%, 75%, 63%, 50%, 38%, 25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 3 of the AF connector can be setup to an external push button
Power supply 2 AA size batteries (Alkaline, rechargeable NiMH)
MTP40 Battery life (2 AA alkaline)
  • approx. 10 hours @ 50mW continuous working
  • approx. 14 hours @ 10mW continuous working
Dimensions 73 x 61 x 17.5 mm (Height-Width-Depth, without clip)
Weight Approx. 80 g. without batteries (120g with batt.)

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Delivery Times

Delivery times are based on when the package(s) leaves our premises. Sometimes, due to stock restrictions or a non-completed order, delivery may take longer as there is a delay with couriers, which is unfortunately out of our hands. If your order is urgent, or details change, please do let us know.
For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 30 working days of receipt (14 to initiate the process), for a full refund or for an exchange for a different product from our range. Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may affect the level of refund you receive. For full details of our returns policy, please click here.

Be the first to Write a Review for this item!

£6,480.00 (£5,400.00 Exc. VAT)
Wisycom MCR54 1x MCR54 4-Channel Multiband True Diversity Receiver
Wisycom MTP41s 4x Wisycom MTP41s Single Battery Beltpack Transmitters
Wisycom BPA54 1x Wisycom BPA54 Bottom Plate (1 x 4-Pin Hirose + 2 x TA5-M)
Delivery hours
UK ORDERS: Order soon for delivery on using our express service

Model:  WISY-MCR54-QUAD-41-B7
Part No.:  Wisy-MCR54-B7kit-41
Manufacturer:  WisyCom

Contact us for advice

Need advice? Give us a call

(+44) 01453
825 802

International Delivery

International delivery

We ship across Europe and around the world and have a multitude of shipping options available to our international customers during the checkout, including express delivery for urgent orders.


We have a next day shipping option available for the UK with our DPD courier service, which features delivery alerts, personal delivery preferences and driver tracking with the DPD mobile app.


Spread the cost to maximise your capital. Just call our helpful sales team on 01453 825 802, from 9.00am - 5.00pm, to discuss these options and find out what's available to you.

We accept Klarna, PayPal, Maestro, Visa, Mastercard & American Express

Wisycom MCR54 w/ 4 x MTP41S Transmitters & BPA54 Bottom Plate Quad Kit

× Site Currency