Zaxcom Nova Mixer Recorder w/ ZaxNet Remote Control & Wireless Receiver Docking
Zaxcom Nova Mixer Recorder w/ ZaxNet Remote Control & Wireless Receiver DockingZaxcom Nova Mixer Recorder w/ ZaxNet Remote Control & Wireless Receiver DockingZaxcom Nova Mixer Recorder w/ ZaxNet Remote Control & Wireless Receiver Docking
Zaxcom Nova Mixer Recorder w/ ZaxNet Remote Control & Wireless Receiver DockingZaxcom Nova Mixer Recorder w/ ZaxNet Remote Control & Wireless Receiver Docking

Zaxcom Nova Mixer Recorder w/ ZaxNet Remote Control & Wireless Receiver Docking

    • A complete sound solution that combines a mixer, a recorder, ZaxNet,
    • And wireless receivers into one compact and lightweight device
    • Can record up to 12 channels of audio with 24 bit depth
    • Two QRX212 dual receivers can be installed directly into the Nova
  • More Details...

Model:  ZAX-NOVA
Part Number:  Nova
Manufacturer:  Zaxcom

£5,799.00
(£4,832.50 Exc. VAT)
+
Apply For Finance

Availability:  

Sold out - More soon  

Sold out - More soon

Related Products

Zaxcom Nova Mixer Recorder w/ ZaxNet Remote Control & Wireless Receiver Docking

Nova is a complete sound solution that combines a mixer, a recorder, ZaxNet remote control and wireless receivers into one compact and lightweight device.

Connectivity

Nova features 4 XLR mic/line NeverClip inputs with 48V phantom power and 2 line level balanced inputs. 4 external AES inputs and 6 analog/AES output buses. 2 AES42 microphones can connect to the AES inputs. 4 channels of AES sample rate converting inputs can connect to external wireless receivers.

Recording

Nova can record up to 12 channels of audio with 24 bit depth. Sample rates include 44.1, 47.952, 48, 48.048, 96 and 192. Audio can be recorded individually or simultaneously two compact flash cards. Files are recorded as MARF II, a lossless fault tolerant recording format to the internal drive or as Broadcast Wave files (BWF).

Mixing

5 faders are high resolution continuous encoders with led indicators to indicate fader position and can display precise input audio level metering. The faders are user organized into 4 banks of 5 sources. Fader control, trim control and ZaxNet transmitter preamp gain are all accessed with the touch of a single button.

Wireless

Two optional QRX212 dual receivers can be installed inside the Nova. All connections are made without external cables. Each QRX212 can receive audio from up to 2 separate transmitters in mono or stereo mode for up to 8 channels of wireless audio total. The QRX212 receivers are the same as found on the RX-12 and RX-12R and are interchangeable with the Nova.

The QRX212 receivers are fully integrated into the Nova. When a frequency is changed, both the receiver channel and the transmitters on the talent are changed at the same time. When frequency scans are initiated, all transmitters on talent are put in non-transmission mode so an accurate scan can be done. Once the scan is complete all transmitters and receivers can be assigned to clean frequencies instantly with the touch of a single button. The transmitters will automatically be enabled on the new frequency.

Full integration of Zaxcom Digital Recording Wireless with the Nova makes for a unique and powerful system. Track names from the recorder can be automatically sent to the backup recordings on the wireless transmitters for easy identification in post. As an alternative, transmitter names can automatically rename the ISO tracks of the recorder. The Nova’s transport control can automatically control the recording on the bodypack transmitters so that there is a matching file on the transmitter for each recorded file on the Nova. Timecode is automatically jammed remotely on each recording transmitter without the need to jam with a hardwired cable.

Nova includes a 35 MHz tunable tracking front end filter for the wireless receivers. This filter allows for rejection of interfering sources like UHF walkie talkies.

Interface

Nova’s graphical user interface is intuitive and simple. All buttons and knobs are ergonomically spaced to eliminate accidental bumping of levels due to overcrowding of buttons and switches on the front panel. An LCD paired with 6 push buttons provides menu navigation.

Advanced Features

ZaxNet remote control gives the ability to adjust frequency, preamp gain and output power on Zaxcom transmitters eliminating the need to approach the talent.

Audition and Re-record allows for instant remix and recovery of dropouts due to RF transmission interruption.

Power

Nova uses two power inputs for redundant operation. External power distribution is not necessary as no external hardware is needed when using the Nova.

Specifications

Analog In Inputs: 4 Mic/line-level with 48V phantom power and 2 line-level
Connector: 4 x XLR-3F (2 with .25” jack)
Mic level input range: -56 to -26 dBu
Line level input range: -10 to +8 dB
Distortion: 0.0015%
ADC bit-depth: 24 bits
Dual ADC input dynamic range: 140 dB with NeverClip™
Clipping level: +28 dBu
Frequency response: 28** Hz to 22 kHz (48 kHz sampling-rate)
THD + noise: 0.0015%
Analog Out 4 Balanced TA5 (6 bus) - 0dBu, -10dBu and -35dBu
Headphone: 1/4 inch stereo bus
Output level: 0 dBu @ -20 dBFS
Output Clipping level: +20 dBu
DAC Bit-depth: 24 Bits
DAC Dynamic Range: 115dB
Impedance: 30 ohm
Digital In / Out AES / AES42 In: 2 Pair (4 Channels)
AES Out: 3 Pair (6 Busses)
Connector: DB-15 mini (DE-15)
AES Sample rate conversion: 32-96 KHz
ZaxNet RF Interface 2.4 Ghz Transmitter: 50mW output power
Frequency Range: 2.403 to 2.475 GHz
Modulation Type: Spread Spectrum
Bandwidth: 1MHz
Connector: SMA female
Receiver QRX212 Receiver module slots: 2
RF Connectors: 2 SMA
RF Impedance: 50 ohm
RF Amp Noise Figure: .5 dB
RF Amp IP3: +30 dB input
RF Filter Band Pass: 35 MHz
RF Tuning Range: 512 - 698 MHz

QRX212 Module

Receivers Channels Per Module: 2
Receiver Modulation: Zaxcom Proprietary Digital
Tuning Range: 512 - 698 MHz
Power Consumption: 200 ma @ 12 VDC
Size: 5" x 3" x .8" (L x W x H)
Recording Track count: 12
Bit-depth: 24 bits
Sample rates (kHz): 44.1, 47.952, 48, 48.048, 96,192
(192 4-track maximum)
Head room: 20 to 44 dB
Format: MARF II, .BWF
Max Pre-record duration: 10 seconds
Data Storage Internal: Dual Compact Flash
Mixer Type: 32 bit floating point DSP
A-D / D-A resolution: 24 bit
Effects Delay: 0 to 60 mS in .1mS steps
Notch filter: 2 band, 20 Hz to 20 kHz frequency range adjustable
Compressor type: soft knee with side chain
High Pass Filter: 20 Hz to 230 Hz
Timecode Reader/Generator Timecode type: SMPTE
Connector: BNC
Input Voltage: 1-4VPP
Output Voltage: 2VPP
Clock Accuracy: 1.54 PPM
Timecode Frame-rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
Power External: 8 to 18 VDC
External Power: 8 to 18 VDC (12V @300mA)
Power Connecter: Hirose
Battery Meter: Yes, on LCD display
Physical Size (H x W x D): 2.0″ x 8.25″ x 6.0″
Weight: 2 lbs. 9 oz without QRX212 modules
3 lbs. 7 oz loaded with 2 x QRX212 modules
Misc. Tone Level Selectable: -12 to -20 dB FS
Display: Full color sunlight readable LCD
Meters: Output / Input / Card
Slate Mic: Internal / External

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Product Reviews

Be the first to Write a Review for this item!

× Site Currency