Zaxcom URX100 Multipurpose UHF Receiver / IFB Walkie Talkie / Receiver w/ Timecode
Zaxcom URX100 Multipurpose UHF Receiver / IFB Walkie Talkie / Receiver w/ TimecodeZaxcom URX100 Multipurpose UHF Receiver / IFB Walkie Talkie / Receiver w/ TimecodeZaxcom URX100 Multipurpose UHF Receiver / IFB Walkie Talkie / Receiver w/ Timecode
Zaxcom URX100 Multipurpose UHF Receiver / IFB Walkie Talkie / Receiver w/ TimecodeZaxcom URX100 Multipurpose UHF Receiver / IFB Walkie Talkie / Receiver w/ TimecodeZaxcom URX100 Multipurpose UHF Receiver / IFB Walkie Talkie / Receiver w/ Timecode

Zaxcom URX100 Multipurpose UHF Receiver / IFB Walkie Talkie / Receiver w/ Timecode

    • The URX100 is a multipurpose UHF receiver that can be configured as:
    • A camera link receiver, an IFB receiver with walkie talkie interface
    • Or a standalone IFB receiver with timecode view and delay
    • Compatible with any Zaxcom Digital Recording Wireless transmitter
  • More Details...

Model:  ZAX-URX100
Manufacturer:  Zaxcom

£1,098.00
(£915.00 Exc. VAT)
+
Apply For Finance

Availability:  

Sold out - More soon  

Sold out - More soon

Related Products

Zaxcom URX100 Multipurpose UHF Receiver / IFB Walkie Talkie / Receiver w/ Timecode

The URX100 is a multipurpose UHF receiver that can be configured as a camera link receiver, an IFB receiver with walkie talkie interface or a standalone IFB receiver with timecode view and delay.

Connectivity

The URX100 is compatible with any Zaxcom Digital Recording Wireless transmitter. The UHF diversity receiver utilizes a tunable tracking front end filter to combat interference and extend range.

Two antennas (one internal, one external) provide dropout resistance. Operating distances can exceed 500 feet (152 m).

Camera Link

It features two modes of operation: stereo audio output or mono audio output with SMPTE timecode. Stereo audio or balanced mono audio is output from the 3.5mm headphone jack. SMTPE timecode and mono unbalanced audio is output from the auxiliary TA5 connector.

Walkie Talkie Interface with URXL1 Lanyard

The URX100 can be connected to the remote speaker/mic port of a walkie talkie. You can route the walkie talkie audio left, right or center by the URX100 and/or mix the walkie audio with the URX100 receiver audio. Both the URX100 and walkie talkie audio to be heard at the same time with a single pair of headphones when using the URXL1 Lanyard.

The URXL1 Lanyard has a push-to-talk button and a microphone. Volume control is adjustable. Any headphone with a 3.5mm jack can be plugged into the URXL1 Lanyard. The URXL1 Lanyard is optional.

IFB Receiver

Menu options include mono or stereo audio and view timecode on the OLED display. Up to six frames of programmable delay allow for video sync.

Paired with the URXL1 lanyard both the IFB audio and walkie talkie audio can be listened to. Talk back is through the built-in URXL1 microphone. Volume is adjustable.

The URX100 can monitor a stereo signal or route the audio to left, right and both ears as a mono mix. The stereo signal can be selected at the URX100 so that a boom operator can monitor one of two transmitted channels that can include a public IFB feed as well as a private communication channel. This monitored audio can also be combined with the audio from a connected walkie with left, right or center routing.

Remote Control

A browser based remote control interface lets the URX100’s to be programmed remotely.

Power

3-AA lithium batteries provides up to 10 hours of runtime. Alkaline lasts up to 8 hours.

Specifications

Receiver Receiver RF Channels: 1
Diversity method: antenna switching
RF Modulation: proprietary digital method
RF Frequency Range: 512 to 698 MHz
RF Frequency Step: 100 KHz
RF Signal Bandwidth: 200 KHz
Channel Separation: 500 KHz (700 KHz recommended)
Sensitivity: -114 dBm
Antenna Connector: 50-ohm SMA female
Receiver Audio – Analog Output
Dynamic Range: 110 dB
Distortion: 0.002%
Frequency Range: 20Hz to 16kHz
DAC Bit-depth: 24 bits
Connector: TA-5M
Audio Output Impedance: 16 ohms
Output Power: 100 mW
Output Type: Headphone driver
Output connector: 3.5 mm
Mode: 2-Channel unbalanced or 1-Channel balanced
Max Output Level: +12 dBm
Timecode Timecode output connector: TA5 Male
Timecode output level: .01VPP – 3VPP Variable
Time code output rate: 23.98, 24, 25, 29.97 ND, 29.97 DF, 30
TA5 Auxiliary Connector Timecode output
Left audio out
Walkie Microphone out
Walkie Audio return
Power Internal Power: 3 AA Batteries
Li-Ion Battery Life: Up to 11 hours
NiMH Battery Life: Up to 9 hours
Alkaline Battery life: Up to 7 hours
*these times are approximate and will be refined as more testing is done*
Misc. Weight: 4.5 oz without batteries
Dimensions: 4.1” x 2.5” x .9”
Display: Graphic OLED Panel

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Product Reviews

Be the first to Write a Review for this item!

× Site Currency