Zaxcom ZMT3 Ultra Small Digital Wideband Transmitter w/ Internal Recording
Zaxcom ZMT3 Ultra Small Digital Wideband Transmitter w/ Internal RecordingZaxcom ZMT3 Ultra Small Digital Wideband Transmitter w/ Internal RecordingZaxcom ZMT3 Ultra Small Digital Wideband Transmitter w/ Internal Recording
Zaxcom ZMT3 Ultra Small Digital Wideband Transmitter w/ Internal RecordingZaxcom ZMT3 Ultra Small Digital Wideband Transmitter w/ Internal RecordingZaxcom ZMT3 Ultra Small Digital Wideband Transmitter w/ Internal Recording

Zaxcom ZMT3 Ultra Small Digital Wideband Transmitter w/ Internal Recording

    • Wide-band transmitter featuring Zaxcom’s High Density (ZHD) Modulation
    • Small and durable, it’s housed in a high strength, impact resistant nylon polymer casing
    • Features internal recording to a MicroSD card.
    • Available in two frequency bands: 512 – 614 MHz or 596 – 698 MHz
  • More Details...

Model:  ZAX-ZMT3-5
Manufacturer:  Zaxcom

Freq. Block:  
£2,118.00
£1,998.00
(£1,665.00 Exc. VAT)
+
Apply For Finance
Related Products

Zaxcom ZMT3 Ultra Small Digital Wideband Transmitter w/ Internal Recording

The ZMT3 is an ultra small bodypack transmitter filled with Zaxcom’s Emmy Award winning Digital Recording Wireless features like NeverClip™ and ZaxNet remote control. This tiny unit will surely open the door to new ways of recording sound for television, sports, theatre and feature films.

The ZMT3 is a wide-band transmitter featuring Zaxcom’s High Density (ZHD) Modulation. The ZMT3 transmitters are also capable of running all existing mono Zaxcom modulations maintaining compatibility with all Zaxcom receivers. ZHD modulation conforms to all currently proposed FCC regulations for spectrally efficient wireless transmission.

The ZMT3 also features internal recording to microSD. Records to file format .ZAX which can be converted to BWAV or MP3.

Small and durable, it’s housed in a high strength, impact resistant nylon polymer casing with rounded edges, machined metal and rubber gaskets. ZMT runs cool, the combination of the nylon composite case and its power efficiency make the heat transfer practically nonexistent.

The ZMT3 works with ZaxNet, Zaxcom’s 2.4-GHz RF network that distributes remote control commands, timecode and IFB audio. With ZaxNet, one can remotely control transmitter settings such as gain, frequency channel selection, transport controls and output power levels. The ZMT3 also sends a Quality Control audio signal over ZaxNet so when micing someone you don’t have to go to the cart to hear how it sounds, you can use an ERX to listen to the mic right on the spot.

The ZMT3 can be ordered in one of two configurations:

  • ZMT3.5 – covering blocks 20 through 23 (512 – 614 MHz)
  • ZMT3.6 – covering blocks 23 through 26 (596 – 698 MHz)

Specifications

Transmitter RF Modulation: Proprietary Digital Method
ZMT3.5 RF Frequency Range: 512 - 614 MHz
ZMT3.6 RF Frequency Range: 596 - 698 MHz
RF Frequency Step: 100 KHz
RF Bandwidth in ZHD48 Mode: 50 KHz
RF Bandwidth in ZHD96 Mode: 100 KHz
RF Bandwidth in XR Mode: 200 KHz
Channel Separation in ZHD48 Mode: as close as 100 KHz (receiver dependent)
Channel Separation in ZHD96 Mode: as close as 200 KHz
Channel Separation in XR Mode: 400 KHz
Antenna Connector: 50 Ω SSMA Female
Emission Designator: 180 KV2E, 100 KV2E, 50 KV2E
FCC Part: 74.861
Transmitter Audio Dynamic Range: 128 dB
Distortion: 0.002%
Frequency Response: Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz
High Pass Filter: Off or 30 to 220 Hz, Steps: 10 (6 dB Per Octave)
Mic Power: 3.3 VDC
Mic Connector: 3-Pin Micro LEMO
Input Range: -60 to -30 dBu
Mic Impedance: 6.8 k Ω
ADC Bit-Depth: 24 Bits
ADC Sampling-Rate: 48 kHz
Timecode Reader / Generator Timecode output: 3-Pin Micro LEMO
Clock Accuracy: 1.54 PPM (1 Frame Out in 6 Hours)
Timecode Type: SMPTE
Timecode Frame-Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
Internal Recording Media: MicroSD Card (Flash Memory)
File Format: .ZAX / Converts to BWAV or MP3
2.4 GHz ZaxNet Receiver RF Frequency Range: 2.403 to 2.475 GHz
RF Modulation: Digital Spread Spectrum
RF Frequency Step: 0.001 GHz (1 MHz)
RF Bandwidth: 1 MHz
Channel Separation: 2 MHz
Sensitivity: -96 dBm
Physical Weight: 2.2 oz / 62 grams with Battery
Dimensions (H x W x D): 2.2″ x 1.6″ x .55″ / 55.8mm x 40.6mm x 14mm
Display: Graphic OLED
Power Power Output: 25 / 50 / 75 mW – Software Selectable
Battery Type: NP-50
Battery Life: Up to 5.5 Hours

Delivery Services

At Pinknoise Systems we like to offer our customers a wide choice of delivery options for their orders, and our prices are affordable and competitive. We also use only the best, most reliable couriers and delivery services to get your equipment where it needs to be - quickly and securely. Please find an outline of our services, prices and timescales below.

Service Timescale Price
UK Mainland Royal Mail Small Parcel 2-4 Days £3.99
UK Offshore Royal Mail 2-4 Days £9.99
UK Standard Courier 2-4 Days £6.49
UK Express Courier Next Day £7.99
International Shipping From 1-8 Days (Full Details) From £15.00

Delivery Times

Delivery times are based on when the packages leaves our premises. Sometimes, due to stock restrictions or a non completed order, delivery may take longer as there is a delay with dispatch. We will always notify customers of any issues and problems via email or telephone. If your order is urgent or details change please do let us know.

For full details, fees, and time schedules, please see our Delivery Information page.

Returns & Refunds

New items: You can return goods you have ordered from us for any reason, at any time within 7 working days of receipt, for a full refund or for an exchange for a different product from our range. The cost of returning goods to us shall be borne by you, the customer, in all circumstances without exception.

Items must be packed suitably and insured for full loss in the event of a delivery problem. Pinknoise Systems will not be responsible for lost or damaged return goods. Lost or damaged goods may effect the level of refund you receive.

Used items: Please note this does not apply to used item unless they are deemed faulty.

For full details of our returns policy, please click here.

Product Reviews

Be the first to Write a Review for this item!

× Site Currency